|07-16-2012, 01:26 AM||#1|
Join Date: Jul 2012
Device: Kindle touch
Help to Unbrick KT with simple debrick Method.
I dont speak ing very well, but i need help.
I follow this guide :
And finally get a black screen like this ( :
Uploaded with ImageShack.us
Last edited by Loko_bielsa; 07-16-2012 at 02:05 AM.
|07-16-2012, 05:41 AM||#2|
Join Date: Jun 2012
Did you erase mmcblk0p3? You should issue following command in diags SSH:
dd if=/dev/zero of=/dev/mmcblk0p3 bs=4K
|07-16-2012, 07:26 AM||#3|
Всё гениальное просто.
Join Date: Nov 2011
Location: Щедрость не имеет пределов.
Black screen is often from a dead battery. Charge it with a wall charger for a few hours. The connect it to a windows PC (or windows MV on a linux PC) and use MfgTool to boot it to fastboot mode and let it charge for a few more hours. Then try booting it again. If it will not boot itself, try booting main and diags modes with MfgTool.
Report the results here.
There have been cases where a "fade to black" happens right after screen refreshes as an early symptom of a damaged eink screen (before a crack begins to grow). Hopefully it is just a discharged battery.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Tutorial Original "Simple" debricking methods for K5-Touch, K4-Mini, & K3-Keyboard||geekmaster||Kindle Developer's Corner||1316||06-29-2015 11:55 PM|
|K3 Unbrick your Kindle 3 - Video||seaniko7||Kindle Developer's Corner||22||09-07-2012 04:46 PM|
|A easy and offical way to debrick k3.||xueyou2||Kindle Developer's Corner||3||05-01-2012 08:42 AM|
|Troubleshooting simple kindle touch (and k4nt) debricking method||geekmaster||Amazon Kindle||0||03-02-2012 10:31 PM|
|PRS-505 Finally unbrick my prs505! - a new method||hamimelon||Sony Reader||12||07-28-2011 03:11 PM|