|06-04-2012, 12:44 PM||#1|
Join Date: Jun 2012
Device: Onyx M92
no refresh on M92
I've got my first e-reader, a Boox M92, 4 days ago. And this is my first post on this forum.
After only half a day of experimenting the features and reading a little some documents, the M92 stopped refreshing properly, making the device nearly unusable.
I cannot trace back what action caused the change of behaviour.
Basically, there are two kinds of refresh errors:
- not refreshing at all, i.e., no apparent change of page after asking for a new page (either with the arrows, with the joystick, or selecting a function icon). When reading a book and turning to a new page which doesn't show, if I click on the refresh icon in the bottom right corner, the refresh is done in two steps: first a refresh that leaves the previous page very dimmed in the background, and after a second click on the refresh icon, a full refresh. But if I'm not reading and selecting a new application or function on, say, the main page, there is no refresh icon (or I didn't find it), and then I'm basically lost in an invisible page. The "no refresh" occurs apparently randomly but very frequently, about once every two or three times.
- showing two pages at once. This happens almost systematically when turning to a picture page with (almost) no text, in a pdf file. Then the picture is completely meshed with the previous page. If clicking on the refresh icon, the page seems to appear correctly (but with an image, if the previous page is dimmed in the background, I probably wouldn't see it), except in a few cases, for which I couldn't analyze the reason, where the meshing persists.
Rebooting has no effect at all.
In particular, if I had stopped reading a pdf on a picture page meshed with the previous one, reading again this file after a reboot shows me again the same meshed page.
At the beginning, I did not really understand that the problem was a refreshing one, and the state of the device degraded further up to a point that when rebooting I was no longer shown the initial Onyx image with the three books, only the booting progress bar, and the main page showed partially only.
I then updated the firmware to the 1.7 version (update-20120514), which apparently went on correctly, and just after that I formatted the internal storage.
I presently do not use the internal storage for documents, only the SD card.
The booting page now reappears correctly again, but the refresh problem persists.
It seems it is worse if I select the option "always refresh", and better if I select the option "refresh every 3 (or 5) pages".
Thanks in advance for any suggestion towards a solution.
|06-04-2012, 03:07 PM||#2|
Join Date: Feb 2012
Device: Boox m92
|06-05-2012, 03:37 AM||#3|
Join Date: Jun 2012
Device: Onyx M92
I tried to get in touch with Booxtor by email, to whom I bought the device. I don't know why I still didn't get any reply from him. I'll have to call, I guess.
|06-05-2012, 04:55 AM||#4|
Join Date: Jun 2011
Device: a lot of..
Sorry to hear about difficulties with ereader you have got. This behavior is actually VERY unusual - never heard about such a problem before. It is definitely a case for replacement. I guess the display controller has got a malfunction.
I will send you instruction what to do next directly from our store site.
UPD: I have just checked emails from our customers and could not find yours .
Please use that link to contact us: http://ereader-store.de/contact-form.php
Last edited by Booxtor; 06-05-2012 at 05:17 AM.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Boox M92. Spring Bargains. The price of M92 stays reduced for 14 days :)||Booxtor||Onyx Boox||5||03-02-2012 05:16 AM|
|What Does Everyone think of the K3 refresh||Scarpad||Amazon Kindle||6||08-29-2010 10:00 PM|
|After refresh||maxhyl||iRex||1||11-23-2008 03:50 AM|
|Gen3 Refresh||Hatgirl||Bookeen||15||10-14-2008 12:19 PM|
|Faster Refresh||wallcraft||iRex||2||10-11-2008 07:16 PM|