|11-04-2012, 05:44 PM||#46|
Join Date: Feb 2012
Device: Sony PRS-t1
Hi uboot, i got some progress finally. I have put back my image with original partitions and started over again, but this time with Acronis Disk Director Home (ADDH). It looks like Minitool does some bad things..i don't trust it anymore.
Every step of ADDH goes ok, but beware: The translated version of this tutorial in English contains al lot of bad code. The command lines synax gets screwed up by google.translate! So, for the right code, you have to see the Russian code.
Uboot, i am stuck on the last commands.
According to the tutorial ADDH i have to do this after the repartitioning:
#mkdir sys (i get the message it already exists!)
#mkdir sd (i get the message it already exists!)
#mount /dev/mmcblk2p4 sd (i get an error: mounting /dev/mmcblk2p4 on sd failed: Input/output error)
#mount /dev/mmcblk2p10 sys (works ok!)
tar -xvf /tmp/sd/system.tar . (can't open '/tmp/sd/system.tar': No such file or directory)
Do you have any idea what's going on?
|11-05-2012, 08:42 AM||#47|
Join Date: Nov 2011
Location: old europe
Device: Kobo Mini, Sony PRS T1
I have no clue where the commands you cited come from Please give us some link!
Anyways - your reader partition seems to be corrupted. I guess you just have to format it via
mkdosfs -n READER -F 32 /dev/mmcblk2p4
BUT: the commands you listed aim to restore the system partition from a tar file on the reader parition - which won't be there now, so you just ran into a dead end.
I highly recommend you not to blindly enter some commands you find somewhere on the internet, not knowing what exactly they are aiming for.
|11-06-2012, 06:07 AM||#48|
Join Date: Feb 2012
Device: Sony PRS-t1
First i tried this tutorial, using Minitool to repartition my PRS-T1, but somehow it got corrupted. So, i restored my original image with RoadKill Diskimage and started all over again, but now with this tutorial:
In this tutorial they use Acronis Disk Director Home (ADDH).
One of the first commands in this tutorial is indeed to make a tar from the system partition, but I couldn't restore it in the end.
So, I used rescue_1.04.zip after repartitioning to restore the system and used your command to reformat the data partition (mkfs.ext4 -L data -m 0 -j /dev/mmcblk2p9). But, with this rescue image, i had to choose my language and Region again on every boot, so I used this rescue image instead: sdrescue_1.04_porkupan.7z
Afterwards i used your format command for the data partition again and now everything is fine!
However, you state that your Package 1 "rescue_1.04.zip" creates more inodes, which is handy for rooting the device later. Is it really neccesary to get more inodes?
(Now i've used Package 2 ( sdrescue_1.04_porkupan.7z) which don't make more inodes)
I rooted my PRS-T1 afterward with AMR and Apps2SD and everything is working ok.
Using ADDH for repartitioning is working ok, but you have to reboot your PC after every repartitioning step, so it takes some time, but it does the job really well.
My other problem, that i couldn't see my PRS-t1 drive with Minitool or Acronis Disk Director is solved. I forgot to put the rupor-rescue.7z image on my external SD-card to boot in recovery mode. If you boot in recoverymode with this image on the SD-card, you are able to see your PRS-T1 drive on your pc and make and restore images from it.
So, everything is working ok now, i have lots of extra storage to put my programs on.
Again, thanks for the help!
Last edited by bartch; 11-06-2012 at 06:22 AM.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|PRS-T1 Completed guide for repartitioning.||homeos||Sony Reader Dev Corner||20||04-05-2012 12:54 PM|
|902 Some questions...||Fisch||PocketBook||8||03-12-2011 08:00 AM|
|PRS-900 Two Questions||luqmaninbmore||Sony Reader||21||02-21-2010 03:25 PM|
|Two Questions||Ryuujin27||Calibre||5||05-11-2009 11:38 AM|
|Few Questions||alex_l||Which one should I buy?||4||05-13-2008 11:30 AM|