|09-24-2012, 04:15 AM||#1|
Join Date: Sep 2012
Device: Pocketbook Pro 902
Pocketbook 902 hangs at startup
I'm having trouble with my Pocketbook pro 902 and I don't know what to do with it. I connected my PB to the PC this morning and pressed the power button. Since then it has been stuck on the "dear user" screen and won't respond to anything I do.
I can't access it through the PC since I don't get to the part where I choose PC link, pressing the power on/off button does nothing and I don't have anything small enough to stick into the reset thing. (I assume you're supposed to stick a needle or something in there?) I don't have any external memory either. I tried searching this forum and found suggestions to update the firmware etc but I have no idea how to do that.
I'm horrible at dealing with devices like this so any advice you can give would be great.
|09-24-2012, 04:43 AM||#2|
Join Date: Nov 2010
Device: PB622, Nexus7, Sony PRS 350, Tolino und nur noch wenig toter Baum:(
Try a paper-clip, not a needle to reset the device
If the reset button doesn't help get a cheap micro-SD card with 1 or 2 GB (cost less than 5$ and you can still use them afterwards) and a card reader (if your PC doesn't have one built in), download FW from here, unpack it to the SD card and insert intto the 902.
Then press "power" and both "page turn" buttons at the same time until you see something happening.
For the rest of the process follow instruction osn the screen.
Hope this will help.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Calibre hangs at startup||elo500||Devices||2||10-08-2011 07:25 PM|
|902 Pocketbook 902 hangs||vvdb||PocketBook||22||04-19-2011 09:34 PM|
|Reader Library 3.3 hangs on Startup (Mac)||ChristopherTD||Sony Reader||3||02-27-2011 12:15 PM|
|Calibre hangs on startup after moving to NAS||smartin||Calibre||4||09-26-2010 04:21 PM|
|Reader Hangs on Startup...yes, it's charged!||doublekross||Sony Reader||3||06-14-2009 11:40 AM|