|04-23-2014, 12:38 PM||#1|
Join Date: Apr 2014
Device: Netronix EB600
Help with damaged bootloader in EB600
I have a Inves Ebook 600 (Netronix EB600)
It seems to be bricked because all you can see is a garbled screen, but the device reacts to buttons. I can power on and power off. I can see how the screen change with more garbled contents. I can launch a firmware upgrade, and it seems to terminate ok. And i cant mount it with USB cable.
Firmwares I have tested
bq 1.0, bq 2.1, bq 2.3
cool-er 206 (from here http://www.mobileread.com/forums/sho...7&postcount=15)
Original Inves Firmware.
I have modified upgrade script to generate a log, and it seems to work ok, so i don't think that the ebook is bricked. It seems like something in the bootloader breaks the graphics and everithing looks garbled after that.
I have searched for bootloader repair methods, but all I have found is a post in russian explaining how to make a serial cable (and solder into motherboard) to debrick the device.
Since my device can run a SD upgrade, ¿is there any method to flash a bootloader from a SD card?
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|The new Kindle Fires have a locked bootloader||Jessica Lares||Kindle Fire||17||09-18-2012 07:11 PM|
|Nook Tablet bootloader bypassed||afv011||Nook Developer's Corner||2||01-18-2012 06:55 AM|
|Gen3 Bootloader reload options||readerdm||Gen3 Developer's Corner||7||03-14-2011 09:20 AM|
|Gen3 Can't Get to Bootloader||readerdm||Bookeen||7||07-28-2010 03:48 PM|
|iLiad Iliad bootloader: how to break automatic boot process?||alegeott||iRex Developer's Corner||2||12-03-2009 02:16 PM|