Calibre intermittently not recognizing nook color

cosmic_joke · 03-03-2011, 01:38 PM

Good day,
I have tried goggling and have not found what's causing the problem. Sometimes Calibre recognizes the nook color and the SD card within it and sometimes it doesn't. Yesterday I was putting things on all afternoon and to make sure everything looked right I disconnected and reconnected a couple of times and calibre kept recognizing it just fine.

Today it's not recognizing it, I've tried disconnecting it and reconnecting with calibre open,calibre closed, connecting it while in sleep mode and then turning it on while connected to the computer and having it already awake when I connected it in case that made a difference.

I have tried restarting the computer and running the repair calibre options.

any ideas?

theducks · 03-03-2011, 03:57 PM

Welcome to MR

Someone with nook knowledge (say that fast

, will be along.

Some devices have a specific step to perform or the just wind up in 'charging' mode. (mine displays a message for a short period when fires connected and assumes 'charge' if I do not press the right key)

kovidgoyal · 03-03-2011, 05:30 PM

You can get more info by starting calibre in debug mode (click the arrow next to preferences)

cosmic_joke · 03-03-2011, 06:07 PM

That's odd. I had given up on getting it recognized by calibre. I had left it connected just there while I did other things. I turned on calibre an hour or so after that, trying to see how I find debug mode and the nook color was recognized.
I don't get it.
Does the nook need to be connected for an hour before it gets recognized by calibre?

I don't understand that.

cosmic_joke · 03-03-2011, 07:10 PM

On a separate note, is itunes supposed to open when i open calibre? or is it not suppose to do that and it could be related with the issue i am/was having?

DoctorOhh · 03-03-2011, 07:52 PM

Quote:

Originally Posted by cosmic_joke

Does the nook need to be connected for an hour before it gets recognized by calibre?

I suspect you had a ipod or other apple device charging. This prevented calibre from seeing your Nook. To prevent this go to preferences - plugins - device interface plugins and disable the Apple plugin.

Killing the plugin won't hinder getting books to an Apple device since the recommended method for getting books to an Apple device is via the connect to iTunes feature.

Quote:

Originally Posted by cosmic_joke

is itunes supposed to open when i open calibre?

No.

cosmic_joke · 03-03-2011, 08:38 PM

Quote:

Originally Posted by dwanthny

I suspect you had a ipod or other apple device charging. This prevented calibre from seeing your Nook. To prevent this go to preferences - plugins - device interface plugins and disable the Apple plugin.

Killing the plugin won't hinder getting books to an Apple device since the recommended method for getting books to an Apple device is via the connect to iTunes feature.

Hmm, my iphone was connected at the same time. And I had disconnected the iphone already by the time i restarted calibre and it was working, so I'm going to disable that plugin and if that's the problem I shall be doing a happy dance in your name.

ghost6007 · 03-14-2011, 12:26 AM

I just ran across this question while looking for a solution to the same problem; I registered on the forum just to answer this question.
It seems that when you "unlock" your Nook Color and plug it into a Windows 7 computer, the PC locks up the NOOK color and so when you launch Calibre, it won't recognize the device.
In order to rectify this, simply "eject" the "NookColor" from you Windows System Tray. When you do it, Calibre will immediately pickup the device and you should see the "Device" icon in the Calibre software screen.
I verified this by duplicating the issue and solution about 3 times on my Windows 7 PC.
Hope it helps.

03-03-2011, 01:38 PM	#1
cosmic_joke Junior Member Posts: 6 Karma: 241156 Join Date: Mar 2011 Device: Nook Color	Calibre intermittently not recognizing nook color Good day, I have tried goggling and have not found what's causing the problem. Sometimes Calibre recognizes the nook color and the SD card within it and sometimes it doesn't. Yesterday I was putting things on all afternoon and to make sure everything looked right I disconnected and reconnected a couple of times and calibre kept recognizing it just fine. Today it's not recognizing it, I've tried disconnecting it and reconnecting with calibre open,calibre closed, connecting it while in sleep mode and then turning it on while connected to the computer and having it already awake when I connected it in case that made a difference. I have tried restarting the computer and running the repair calibre options. any ideas?

03-03-2011, 03:57 PM	#2
theducks Staff to 4 Cats Posts: 10,707 Karma: 2485850 Join Date: Aug 2009 Location: The (original) Silicon Valley, USA Device: Galaxy Tab 2,Black Astak PEz, K4NT(now Wifes)	Welcome to MR Someone with nook knowledge (say that fast , will be along. Some devices have a specific step to perform or the just wind up in 'charging' mode. (mine displays a message for a short period when fires connected and assumes 'charge' if I do not press the right key) __________________ Using: Ubuntu(32 bit):Oneric,Precise and XPpro SP3, W7HP(64)- - Libre Office w/Writer2EPUB

03-03-2011, 05:30 PM	#3
kovidgoyal Creator of calibre Posts: 22,485 Karma: 2944574 Join Date: Oct 2006 Location: Mumbai, India Device: Various	You can get more info by starting calibre in debug mode (click the arrow next to preferences) __________________ Get calibre Notice to all: I can not provide assistance with DRM removal, for legal reasons, so please do not contact me about it.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nook support in Calibre and conversion from Kindle to Nook Color?	doowopper	Devices	4	04-27-2011 04:21 PM
Calibre help for Nook Color	Stephiepoo	Nook Color & Nook Tablet	10	02-11-2011 01:38 PM
Nook Color/ Calibre help	emrldsun	Barnes & Noble NOOK	1	01-19-2011 10:53 PM
Nook Color/ Calibre help	emrldsun	Devices	2	01-19-2011 08:14 PM
New Nook Color and Calibre	APerson	Calibre	1	01-04-2011 05:01 AM

03-03-2011, 06:07 PM	#4
cosmic_joke Junior Member Posts: 6 Karma: 241156 Join Date: Mar 2011 Device: Nook Color	That's odd. I had given up on getting it recognized by calibre. I had left it connected just there while I did other things. I turned on calibre an hour or so after that, trying to see how I find debug mode and the nook color was recognized. I don't get it. Does the nook need to be connected for an hour before it gets recognized by calibre? I don't understand that.

03-03-2011, 07:10 PM	#5
cosmic_joke Junior Member Posts: 6 Karma: 241156 Join Date: Mar 2011 Device: Nook Color	On a separate note, is itunes supposed to open when i open calibre? or is it not suppose to do that and it could be related with the issue i am/was having?

03-14-2011, 12:26 AM	#8
ghost6007 Junior Member Posts: 1 Karma: 10 Join Date: Mar 2011 Device: Nook Color	I just ran across this question while looking for a solution to the same problem; I registered on the forum just to answer this question. It seems that when you "unlock" your Nook Color and plug it into a Windows 7 computer, the PC locks up the NOOK color and so when you launch Calibre, it won't recognize the device. In order to rectify this, simply "eject" the "NookColor" from you Windows System Tray. When you do it, Calibre will immediately pickup the device and you should see the "Device" icon in the Calibre software screen. I verified this by duplicating the issue and solution about 3 times on my Windows 7 PC. Hope it helps.


Advertisement Enthusiast