|02-04-2010, 04:21 PM||#1|
Join Date: Feb 2010
Device: kindle dxi
Kindle DX RS232 Connector
based on informations about the serial console for DX, I wanted to have a smart way to connect to PC.
First I thought about using the headphone connector for RS232 because I don't need audio, but on the other hand you never can tell.
So I searched for a way to have a second connector, because there is less space I recyled a MP3 player connector (short neck!) and did some cutting and drilling (see attached files).
Now just waiting for the USB-RS232 TTL3.3V adapter to arrive ...
USB Adapter works fine
Serial Settings are: 115200 baud, 8 data bits, 1 stop bit, no parity, no flow control
Last edited by kindx; 02-05-2010 at 04:43 PM.
|09-25-2010, 10:35 AM||#3|
Join Date: Jun 2010
Location: Paris, France
Device: Kindle 2i, 3g, 4, 5w, (PW) & PW2; Kobo H2O
/sbin/getty -L 115200 ttymxc0 -l /bin/login
|09-25-2010, 11:23 PM||#4|
Join Date: Aug 2010
Location: Maryland, USA
Device: dxg, k3w,k4nt,kpw
please be aware that the serial console connection gets killed in minutes
if the /mnt/us/DO_NOT_KILL_UART file doesn't exist
The above is true for the DXG unit running the 2.5.5 firmware...
Similar technique is used to generate an idle timeout in uBoot on kindle.
Don't know how to cure it -- too boring
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Cybook JTAG connector||skyweb||Gen3 Developer's Corner||5||06-02-2011 04:56 PM|
|Question on the K3 usb connector||carld||Amazon Kindle||9||04-15-2011 11:01 AM|
|iPad Camera connector used in ipod touch?||Patricia1066||Apple Devices||4||02-16-2011 06:42 PM|
|Iliad v2 Travel Hub connector||BNoye||iRex||4||08-24-2010 03:34 AM|
|20-pin connector||minoba56||iRex||0||04-16-2007 10:22 AM|