Glo Speedy Glo please......

jackastor · 03-08-2013, 04:20 PM

IS there any way that the Kobo Glo can be sped up or streamlined especially with the use of book shelves? Is there some secret setting, configuration that we all need to do to make this happen? Does anyone have any tips on how to speed up the Glo? Or some magic incantation to make it seem super fast? Anyone? Or is it just some bad coding in the firmware that makes things like Shelve management horrendous?

Regards

Jack

murg · 03-08-2013, 10:53 PM

One of these will make your Glo go real fast...

GeoffR · 03-09-2013, 12:14 AM

I don't know about shelves, I only have 400 books on my Glo and haven't felt the need to create any shelves yet, but might when I get more books. From what davidfor has said on the subject it seems that less-than-optimal code/design is at least part of the problem.

But more generally the speed of things like displaying covers and opening books seems to depend a lot on whether the cover, book, etc. is already in memory. The first time I open a book it might take 3 seconds, but thereafter it only takes half a second, unless I power off the Glo or do something else that pushes the book out of memory in the meantime.

So I think anything that reduces the size of the objects the Glo has to manipulate will help. E.g. a smaller cover image will take up less memory and so be more likely to still be in memory the next time it is needed and less likely to push something else out of memory.

I noticed that kepubs downloaded from Kobo have black and white cover images, but when the Glo creates the cover image from the first page of a sideloaded book it stores it as a colour image, which takes more space. However if you send the cover image seperately using Calibre you can set it to send black and white images for sideloaded books too.

Another thing is that cover images are not saved for later use if the book is on the external micro SD card, and so will be much slower to display if they are not in memory. I imagine generating the cover will use more memory than loading a pre-generated one too, and so push more things out of memory and thus slow down other operations. You could get around this by replacing the internal card with a larger one and keep as many books as possible on the internal card rather than the external card.

Some books just seem to be badly organised. I have some where the cover and table of contents are at the end of the book that take a long time to open even in Calibre's book viewer, I think it would be possible to speed them up by reorganising the book but I haven't looked into this yet. But there does seem to be a connection between books that are badly formatted or structured and books that are slow to load or have other problems.

Overall I am very happy with the speed of my Glo, but any ideas to make it even faster are welcome, especially as more books are added (I hope to have a few thousand books one day :-)

Lily7 · 03-09-2013, 01:38 AM

Quote:

Originally Posted by GeoffR

However if you send the cover image seperately using Calibre you can set it to send black and white images for sideloaded books too.

How do you do this? I googled but couldn't find a how-to.

GeoffR · 03-09-2013, 02:28 AM

Quote:

Originally Posted by Lily7

How do you do this? I googled but couldn't find a how-to.

Customise the KoboTouch plugin in Calibre (Preferences --> Plugins --> Device interface plugins --> KoboTouch) and tick the "Upload covers for books" and "Upload Black and White Covers" boxes.

Note that the sent covers will be stretched to 3:4 ratio unless you also tick "Keep cover aspect ratio". Kepubs from Kobo seem to keep the original aspect ratio.

Lily7 · 03-09-2013, 03:45 AM

Quote:

Originally Posted by GeoffR

Customise the KoboTouch plugin in Calibre (Preferences --> Plugins --> Device interface plugins --> KoboTouch) and tick the "Upload covers for books" and "Upload Black and White Covers" boxes.

Note that the sent covers will be stretched to 3:4 ratio unless you also tick "Keep cover aspect ratio". Kepubs from Kobo seem to keep the original aspect ratio.

ewphoenix123 · 03-09-2013, 06:13 AM

Well if you want to speed up the shelves and cover loading a new internal SD helps a lot, as long as you get one with very good random read/write speed, have a look here I list the card i put in and what is happening faster with the new one compared to the old one.

https://www.mobileread.com/forums/sho...3&postcount=27

moffattm · 03-09-2013, 03:20 PM

Quote:

Originally Posted by jackastor

IS there any way that the Kobo Glo can be sped up or streamlined especially with the use of book shelves? Is there some secret setting, configuration that we all need to do to make this happen? Or some magic incantation to make it seem super fast?

Shhh, nobody tell him about the secret code that Kobo built in that makes everything go super fast. We don't want it to get out or everyone will be 100% happy with their Kobo e-readers, and of course Kobo don't want that!

jackastor · 03-10-2013, 03:46 PM

Quote:

Originally Posted by moffattm

Shhh, nobody tell him about the secret code that Kobo built in that makes everything go super fast. We don't want it to get out or everyone will be 100% happy with their Kobo e-readers, and of course Kobo don't want that!

Personally I like the sling shot method offered up earlier... easier then remember how to punch in the code to get the power up.

moffattm · 03-10-2013, 06:09 PM

Or maybe add some "go faster racing stripes" to your Glo?

davidfor · 03-10-2013, 08:51 PM

Do they have a red Glo? Red things are always faster.

murg · 03-11-2013, 08:08 AM

Quote:

Originally Posted by davidfor

Do they have a red Glo? Red things are always faster.

Not so sure about this. They were advertising the new Lotus Exigo in the lifts at the office today. It was yellow. And fast.

jackastor · 03-11-2013, 05:19 PM

Quote:

Originally Posted by murg

Not so sure about this. They were advertising the new Lotus Exigo in the lifts at the office today. It was yellow. And fast.

Was it bumble bee yellow or Canary yellow...... im sure the bumble bee yellow is the faster one.

03-08-2013, 04:20 PM	#1
jackastor Wizard Posts: 1,847 Karma: 3212428 Join Date: Jun 2011 Device: iphone stanza, kobo touch,ASUS TF300,KOBO GLO, Kobo Aura HD, Kobo Mini	Speedy Glo please...... IS there any way that the Kobo Glo can be sped up or streamlined especially with the use of book shelves? Is there some secret setting, configuration that we all need to do to make this happen? Does anyone have any tips on how to speed up the Glo? Or some magic incantation to make it seem super fast? Anyone? Or is it just some bad coding in the firmware that makes things like Shelve management horrendous? Regards Jack

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Glo Glo help please!	timewyrm	Kobo Reader	54	03-13-2013 10:41 PM
Glo Screen durability of the glo..is it better than the Nook Glo??	Tony1988	Kobo Reader	4	01-10-2013 07:38 PM
Glo Can kobo glo run android app such as nook glo?	suspect	Kobo Developer's Corner	1	12-28-2012 11:25 PM
Speedy Calibre!	jesscat	Calibre	5	04-12-2011 05:39 AM

03-08-2013, 10:53 PM	#2
murg No Comment Posts: 3,238 Karma: 23878043 Join Date: Jan 2012 Location: Australia Device: Kobo: Not just an eReader, it's an adventure!	One of these will make your Glo go real fast...

03-09-2013, 12:14 AM	#3
GeoffR Wizard Posts: 3,821 Karma: 19162882 Join Date: Nov 2012 Location: Te Riu-a-Māui Device: Kobo Glo	I don't know about shelves, I only have 400 books on my Glo and haven't felt the need to create any shelves yet, but might when I get more books. From what davidfor has said on the subject it seems that less-than-optimal code/design is at least part of the problem. But more generally the speed of things like displaying covers and opening books seems to depend a lot on whether the cover, book, etc. is already in memory. The first time I open a book it might take 3 seconds, but thereafter it only takes half a second, unless I power off the Glo or do something else that pushes the book out of memory in the meantime. So I think anything that reduces the size of the objects the Glo has to manipulate will help. E.g. a smaller cover image will take up less memory and so be more likely to still be in memory the next time it is needed and less likely to push something else out of memory. I noticed that kepubs downloaded from Kobo have black and white cover images, but when the Glo creates the cover image from the first page of a sideloaded book it stores it as a colour image, which takes more space. However if you send the cover image seperately using Calibre you can set it to send black and white images for sideloaded books too. Another thing is that cover images are not saved for later use if the book is on the external micro SD card, and so will be much slower to display if they are not in memory. I imagine generating the cover will use more memory than loading a pre-generated one too, and so push more things out of memory and thus slow down other operations. You could get around this by replacing the internal card with a larger one and keep as many books as possible on the internal card rather than the external card. Some books just seem to be badly organised. I have some where the cover and table of contents are at the end of the book that take a long time to open even in Calibre's book viewer, I think it would be possible to speed them up by reorganising the book but I haven't looked into this yet. But there does seem to be a connection between books that are badly formatted or structured and books that are slow to load or have other problems. Overall I am very happy with the speed of my Glo, but any ideas to make it even faster are welcome, especially as more books are added (I hope to have a few thousand books one day :-)

03-09-2013, 06:13 AM	#7
ewphoenix123 Addict Posts: 200 Karma: 42238 Join Date: Oct 2012 Device: Kobo: Glo, Aura , Aura H2O, Aura ONE, Forma, Elipsa	Well if you want to speed up the shelves and cover loading a new internal SD helps a lot, as long as you get one with very good random read/write speed, have a look here I list the card i put in and what is happening faster with the new one compared to the old one. https://www.mobileread.com/forums/sho...3&postcount=27

03-10-2013, 06:09 PM	#10
moffattm Addict Posts: 333 Karma: 1440670 Join Date: Jul 2010 Location: Auckland, New Zealand Device: Kobo Original, Kobo Glo	Or maybe add some "go faster racing stripes" to your Glo?

03-10-2013, 08:51 PM	#11
davidfor Grand Sorcerer Posts: 24,907 Karma: 47303748 Join Date: Jul 2011 Location: Sydney, Australia Device: Kobo:Touch,Glo, AuraH2O, GloHD,AuraONE, ClaraHD, Libra H2O; tolinoepos	Do they have a red Glo? Red things are always faster.

Advert

Advert