Register Guidelines E-Books Search Today's Posts Mark Forums Read

Go Back   MobileRead Forums > E-Book Readers > Amazon Kindle > Kindle Developer's Corner

Notices

Reply
 
Thread Tools Search this Thread
Old 01-28-2017, 10:23 AM   #1
anunay
Member
anunay began at the beginning.
 
Posts: 21
Karma: 10
Join Date: Jan 2017
Device: Kindle KT2
Exclamation Cannot install custom update packages via MRPI

I am having some problems while installing installing packages such as USBnet, Custom screensaver hack,m etc.
When i viewed the logs the problem i found was
Code:
Package 'Update_linkss_0.24.N_install_pw2_kt2_kv_pw3_koa_kt3.bin' (linkss 0.24.N I WARIO+) is not targeting your device [DD vs. D4 5A D5 D6 D7 D8 F2 17 60 62 5F 61 C6 13 54 53 2A 52 0G1 0G7 0G6 0G2 0G5 0G4 0KB 0KC 0GC 0GD 0GU 0K9 0KA], skipping . . . :(
As you can see my S/N is 90DD XXXX XXXX XXXX (KT2) biut still the package does not work on my device.

The package's install.sh also includes serial of my app
Code:
# Install our hack's custom content
# Check which default screensaver to use...
kmodel="$(cut -c3-4 /proc/usid)"
case "${kmodel}" in
    "13" | "54" | "2A" | "4F" | "52" | "53" )
        # Voyage...
        logmsg "I" "install" "" "using the default voyage custom screensaver"
        HACK_EXCLUDE="${HACKNAME}/screensavers/00_you_can_delete_me.png ${HACKNAME}/screensavers/00_you_can_delete_me-pw.png"
    ;;
    "24" | "1B" | "1D" | "1F" | "1C" | "20" | "D4" | "5A" | "D5" | "D6" | "D7" | "D8" | "F2" | "17" | "60" | "F4" | "F9" | "62" | "61" | "5F" )
        # PaperWhite...
        logmsg "I" "install" "" "using the default paperwhite custom screensaver"
        HACK_EXCLUDE="${HACKNAME}/screensavers/00_you_can_delete_me.png ${HACKNAME}/screensavers/00_you_can_delete_me-kv.png"
    ;;
    "0F" | "11" | "10" | "12" | "DD" | "C6" )
        # Touch & KT2
        logmsg "I" "install" "" "using the default touch custom screensaver"
        HACK_EXCLUDE="${HACKNAME}/screensavers/00_you_can_delete_me-pw.png ${HACKNAME}/screensavers/00_you_can_delete_me-kv.png"
    ;;
    * )
Please me with this problem, any advice will be helpful
in advance
Attached Files
File Type: txt log.txt (8.6 KB, 347 views)
anunay is offline   Reply With Quote
Old 01-28-2017, 10:33 AM   #2
Cinisajoy
Just a Yellow Smiley.
Cinisajoy ought to be getting tired of karma fortunes by now.Cinisajoy ought to be getting tired of karma fortunes by now.Cinisajoy ought to be getting tired of karma fortunes by now.Cinisajoy ought to be getting tired of karma fortunes by now.Cinisajoy ought to be getting tired of karma fortunes by now.Cinisajoy ought to be getting tired of karma fortunes by now.Cinisajoy ought to be getting tired of karma fortunes by now.Cinisajoy ought to be getting tired of karma fortunes by now.Cinisajoy ought to be getting tired of karma fortunes by now.Cinisajoy ought to be getting tired of karma fortunes by now.Cinisajoy ought to be getting tired of karma fortunes by now.
 
Cinisajoy's Avatar
 
Posts: 19,161
Karma: 83862859
Join Date: Jul 2015
Location: Texas
Device: K4, K5, fire, kobo, galaxy
Is yours a special offers kindle?
Cinisajoy is offline   Reply With Quote
Advert
Old 01-28-2017, 11:20 AM   #3
knc1
Going Viral
knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.
 
knc1's Avatar
 
Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
And did you get the package from NiLuJe's snapshot thread?

See:
Current jail break, first post, section: "Release Policy", open, read, and follow the directions in the spoiler.
knc1 is offline   Reply With Quote
Old 02-02-2017, 06:48 AM   #4
anunay
Member
anunay began at the beginning.
 
Posts: 21
Karma: 10
Join Date: Jan 2017
Device: Kindle KT2
I have seen this problem with many packages like HackedupReader.
When i view the info about the package using KindleTool it shows:
Code:
Checking update package 'update_hackedupreader_0.4.1_install.bin'.
Bundle         SP01 (Signing Envelope)
Cert number    0
Cert file      pubdevkey01.pem (Developer)
Bundle         FD04 (Versionless [vls])
Bundle Type    OTA V2
Minimum OTA    0
Target OTA     18446744073709551615
Devices        20
Device         Kindle 5 Touch Wifi
Device         Kindle 5 Touch Wifi+3G
Device         Kindle 5 Touch Wifi+3G Europe
Device         Kindle PaperWhite Wifi
Device         Kindle PaperWhite Wifi+3G
Device         Kindle PaperWhite Wifi+3G Canada
Device         Kindle PaperWhite Wifi+3G Europe
Device         Kindle PaperWhite Wifi+3G Japan
Device         Kindle PaperWhite Wifi+3G Brazil
Device         Kindle PaperWhite 2 (2013) Wifi
Device         Kindle PaperWhite 2 (2013) Wifi Japan
Device         Kindle PaperWhite 2 (2013) Wifi+3G
Device         Kindle PaperWhite 2 (2013) Wifi+3G Canada
Device         Kindle PaperWhite 2 (2013) Wifi+3G Europe
Device         Kindle PaperWhite 2 (2013) Wifi+3G Russia
Device         Kindle PaperWhite 2 (2013) Wifi+3G Japan
Device         Kindle PaperWhite 2 (2013) Wifi (4GB) International
Device         Kindle PaperWhite 2 (2013) Wifi+3G (4GB) Europe
Device         Kindle PaperWhite 2 (2013) Wifi+3G (4GB)
Device         Kindle Basic (2014)
As you can see the last line is for my kindle just the Different variant

on Nicknames page
Code:
B0C6, 90C6-Kindle Basic (2014)	KT2, BASIC  [Support added in KindleTool 1.6.3]
B0DD, 90DD-Kindle Basic (2014) (Australia)	KT2, BASIC	[Support added in KindleTool 1.6.5]
The second is mine (I don't live in Australia) and MRPI still doesn't recognize it.

There can only be a problems: That v1.6.3 of Kindle tool was used to make this package.

Is there a way to repack the package for my device using a updated kindle tool.
anunay is offline   Reply With Quote
Old 02-02-2017, 07:04 AM   #5
anunay
Member
anunay began at the beginning.
 
Posts: 21
Karma: 10
Join Date: Jan 2017
Device: Kindle KT2
Just Found that my kindle is named as KindleBasicKiwi in Kindletool


Check line 212 in kindletool.h from its source
Attached Files
File Type: txt kindle_tool.h.txt (13.6 KB, 299 views)
anunay is offline   Reply With Quote
Advert
Old 02-02-2017, 07:45 AM   #6
knc1
Going Viral
knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.
 
knc1's Avatar
 
Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
Quote:
Originally Posted by anunay View Post
I have seen this problem with many packages like HackedupReader.
When i view the info about the package using KindleTool it shows:
Code:
Checking update package 'update_hackedupreader_0.4.1_install.bin'.
Bundle         SP01 (Signing Envelope)
Cert number    0
Cert file      pubdevkey01.pem (Developer)
Bundle         FD04 (Versionless [vls])
Bundle Type    OTA V2
Minimum OTA    0
Target OTA     18446744073709551615
Devices        20
Device         Kindle 5 Touch Wifi
Device         Kindle 5 Touch Wifi+3G
Device         Kindle 5 Touch Wifi+3G Europe
Device         Kindle PaperWhite Wifi
Device         Kindle PaperWhite Wifi+3G
Device         Kindle PaperWhite Wifi+3G Canada
Device         Kindle PaperWhite Wifi+3G Europe
Device         Kindle PaperWhite Wifi+3G Japan
Device         Kindle PaperWhite Wifi+3G Brazil
Device         Kindle PaperWhite 2 (2013) Wifi
Device         Kindle PaperWhite 2 (2013) Wifi Japan
Device         Kindle PaperWhite 2 (2013) Wifi+3G
Device         Kindle PaperWhite 2 (2013) Wifi+3G Canada
Device         Kindle PaperWhite 2 (2013) Wifi+3G Europe
Device         Kindle PaperWhite 2 (2013) Wifi+3G Russia
Device         Kindle PaperWhite 2 (2013) Wifi+3G Japan
Device         Kindle PaperWhite 2 (2013) Wifi (4GB) International
Device         Kindle PaperWhite 2 (2013) Wifi+3G (4GB) Europe
Device         Kindle PaperWhite 2 (2013) Wifi+3G (4GB)
Device         Kindle Basic (2014)
As you can see the last line is for my kindle just the Different variant

on Nicknames page
Code:
B0C6, 90C6-Kindle Basic (2014)    KT2, BASIC  [Support added in KindleTool 1.6.3]
B0DD, 90DD-Kindle Basic (2014) (Australia)    KT2, BASIC    [Support added in KindleTool 1.6.5]
The second is mine (I don't live in Australia) and MRPI still doesn't recognize it.

There can only be a problems: That v1.6.3 of Kindle tool was used to make this package.

Is there a way to repack the package for my device using a updated kindle tool.
In that case you are all ready to go.

Any package that is built with the older KindleTool -
Using the current KindleTool from NiLuJe's snapshots thread -
Extract the desired package -
Re-package it, specifying your model.

There are examples of doing that posted here.
It is a simple sequence of two command line commands.
knc1 is offline   Reply With Quote
Old 02-03-2017, 05:47 AM   #7
anunay
Member
anunay began at the beginning.
 
Posts: 21
Karma: 10
Join Date: Jan 2017
Device: Kindle KT2
Thumbs down

This is where comes the problem

First I converted the .bin file into a gzipped tarball using
Code:
./kindletool convert update_ko****.bin
then I created a update package
Code:
 ./kindletool create ota2 -d kt2a -p wario -B whitney Komic_converted.tar.gz update_komic_kt2.bin
My Kindle is nicknamed as kt2a in Kindletool 1.6.4.96
Then I installed the package using MRI but it failed with error code (1)
Code:
**** **** **** ****

[2017-02-03 @ 15:39:58 +0530] :: [MRPI r13359] - Beginning the processing of package 'update_komic_kt2.bin' (komic kt2) . . .

--
Running 'install_komic.ffs' for 'komic kt2' (update_komic_kt2.bin) @ Fri, 03 Feb 2017 15:39:59 +0530

eips: pixel_in_range> (608, 288) pixel not in range (0..600, 0..800)
eips: pixel_in_range> (624, 288) pixel not in range (0..600, 0..800)
eips: pixel_in_range> (640, 288) pixel not in range (0..600, 0..800)
eips: pixel_in_range> (656, 288) pixel not in range (0..600, 0..800)
eips: pixel_in_range> (672, 288) pixel not in range (0..600, 0..800)
eips: pixel_in_range> (688, 288) pixel not in range (0..600, 0..800)
eips: pixel_in_range> (704, 288) pixel not in range (0..600, 0..800)
eips: pixel_in_range> (720, 288) pixel not in range (0..600, 0..800)
eips: pixel_in_range> (736, 288) pixel not in range (0..600, 0..800)
eips: pixel_in_range> (752, 288) pixel not in range (0..600, 0..800)
eips: pixel_in_range> (768, 288) pixel not in range (0..600, 0..800)
eips: pixel_in_range> (608, 288) pixel not in range (0..600, 0..800)
eips: pixel_in_range> (624, 288) pixel not in range (0..600, 0..800)

Hu oh... Got return code 1 . . . :(
I have attached install_komic.ffs
Please tell me what I did wrong,
Any would be appreciated
  1. Tarball:Attached
  2. Install _script: http://pastebin.com/3ZbUddhD
  3. Komic v2.3 : https://www.mobileread.com/forums/sh...d.php?t=182183
  4. Custom bin : http://s000.tinyupload.com/?file_id=...68136835939756
Attached Files
File Type: gz Komic_converted.tar.gz (3.61 MB, 287 views)
anunay is offline   Reply With Quote
Old 02-03-2017, 07:39 AM   #8
knc1
Going Viral
knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.
 
knc1's Avatar
 
Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
Those eips messages are only warnings, not errors.
They indicate a mis-match between the screen detection and the on-screen messages, not something done wrong in the un-package / re-package process.

The "error code 1" is a general purpose error message code.
You will have to trouble shoot the scripting to get its model adaption code to work on your model.

Once you get the install scripting working, you may find that the application itself does not work on your model of Kindle.
These packages are "model locked" for a reason and the author might have intentionally not included your model of Kindle.

Last edited by knc1; 02-03-2017 at 07:42 AM.
knc1 is offline   Reply With Quote
Old 02-09-2017, 06:54 AM   #9
anunay
Member
anunay began at the beginning.
 
Posts: 21
Karma: 10
Join Date: Jan 2017
Device: Kindle KT2
Question

Some said to try and not to cry
I tried to troubleshoot the script and as far as i can understand the problem is in these lines of code
Code:
#!/bin/sh
OTA=com.lab126.blanket.ota
LOG=/mnt/us/Komic_update_log.txt
LOCALSTORAGE=/mnt/us/extensions/komic/bin/resource/LocalStorage/file__0.localstorage
GALLERY="/mnt/us/documents/Komic"
OLDGALLERY="/mnt/us/documents/Gallery"
KOMIC="/mnt/us/extensions/komic"
UPSTART="/etc/upstart/komic_event_handler.conf"

progress()
{
	lipc-send-event $OTA otaSplashProgress -i $1
	local x=48
	local y=11
	eips 0 $y "                                                ";
	eips $((($x - $(expr length "$2")) / 2)) $y "$2"
	sleep 3
}

fail()
{
	lipc-send-event $OTA otaSplashError -s "${1}"
	sleep 10
	exit 1;
}

progress 25 "Checking if Komic is installed"
varkomic=$(sqlite3 /var/local/appreg.db "select handlerId from handlerIds where handlerId='com.silver18.komic001'")
varmemory=$(sqlite3 /var/local/appreg.db "select handlerId from properties where handlerId='com.silver18.komic001' and name='memUnloadLevel'")
mesquite=$(sqlite3 /var/local/appreg.db "select value from properties where handlerId='com.silver18.komic001' and name='command'" | grep mesquite)
varbaseus=$(sqlite3 /var/local/appreg.db "select value from properties where handlerId='com.silver18.komic001' and name='command'" | grep base)
Because i see "Checking if Komic is installed" on the screen and then it returns the error code + THE LOG FILE IS NOT GENERATED

There are no model locks in the ffs file.
anunay is offline   Reply With Quote
Old 02-09-2017, 07:46 AM   #10
knc1
Going Viral
knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.knc1 ought to be getting tired of karma fortunes by now.
 
knc1's Avatar
 
Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
The problem is not with MrPI.

You are trying to run Komic on a Kindle model that Komic does not support.
Ref: https://www.mobileread.com/forums/sh...d.php?t=182183

If you intend to update Komic for the newer devices, please keep your posts in the Komic thread.

The public repository is here:
https://bitbucket.org/silvern18/komic

Make your changes in a local clone of the repository and then when working, post a pull request at the public repository.

Last edited by knc1; 02-09-2017 at 07:51 AM.
knc1 is offline   Reply With Quote
Reply

Tags
mrpi;linkss;usbnet

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Can't update to 5.6.1.1. via MRpi szymeko Kindle Developer's Corner 5 12-11-2016 06:54 AM
MrPi destroys packages mitra Kindle Developer's Corner 1 03-10-2016 12:26 AM
Install custom font on 5.2? Barty Kindle Developer's Corner 14 11-29-2012 02:25 AM
PRS-350 is there a way to install a custom dictionary vsviridov Sony Reader 15 04-16-2012 05:21 AM
calibre update 0.8.1 to 0.8.2 custom install directory Dopedangel Calibre 5 05-21-2011 01:15 PM


All times are GMT -4. The time now is 03:22 AM.


MobileRead.com is a privately owned, operated and funded community.