Register Guidelines E-Books Search Today's Posts Mark Forums Read

Go Back   MobileRead Forums > E-Book Readers > PocketBook

Notices

Reply
 
Thread Tools Search this Thread
Old 01-08-2011, 07:53 AM   #1
Zefiro
Junior Member
Zefiro began at the beginning.
 
Zefiro's Avatar
 
Posts: 5
Karma: 10
Join Date: May 2010
Location: Italy
Device: PB902Pro
Stuck during firmware upgrade process

Well, I received my PB902Pro a few days ago but I decided to upgrade the firmware to the latest version only this morning. I downloaded the image, started the upgrade process and sadly the device it is now being stuck for about 20 minutes.
Yes, I am already panicking. I don't think it should take this long.
The last messages were:
Code:
swupdate version: Oct 19 2010.16:41:51
Searching for update image...
Updating from SD card
Device serial number: xxx
Please connect power cable [I connected the power cable]
Checking update image...
Image is OK
Press center key to start update [I pressed the center button] Unknown image type: s
Running update code...
Running update code...




cramfs updating ok
Any suggestion?
Zefiro is offline   Reply With Quote
Old 01-08-2011, 08:04 AM   #2
marty63
Enthusiast
marty63 doesn't littermarty63 doesn't litter
 
Posts: 47
Karma: 104
Join Date: Nov 2010
Location: Prague, Czechia
Device: PocketBook Pro 902
It is possible copy *.bin file to internal memory? Or device is dead now? If you can copy update file to memory, do upgrade firmware straight from her than from SD cards.
marty63 is offline   Reply With Quote
Advert
Old 01-08-2011, 08:15 AM   #3
Zefiro
Junior Member
Zefiro began at the beginning.
 
Zefiro's Avatar
 
Posts: 5
Karma: 10
Join Date: May 2010
Location: Italy
Device: PB902Pro
Seems dead.
Should I try removing the battery or force a full reset?

Edit: I opted for an hard reset. It seems that the upgrade process was restarted but now it seems stuck at
Code:
Switching to temporary kernel..
DO NOT REMOVE sd card... upgrade will be continue(sic)
The battery light is yellow and always on.

It's a nightmare...

Last edited by Zefiro; 01-08-2011 at 08:39 AM.
Zefiro is offline   Reply With Quote
Old 01-08-2011, 08:52 AM   #4
Zefiro
Junior Member
Zefiro began at the beginning.
 
Zefiro's Avatar
 
Posts: 5
Karma: 10
Join Date: May 2010
Location: Italy
Device: PB902Pro
Unbelievable. It seems that I managed to complete the upgrade process by manually resetting the device every time it was stuck!
I don't think that this is normal. Anyway, now it seems to work. Sorry for the noise.
Zefiro is offline   Reply With Quote
Old 01-08-2011, 09:41 AM   #5
marty63
Enthusiast
marty63 doesn't littermarty63 doesn't litter
 
Posts: 47
Karma: 104
Join Date: Nov 2010
Location: Prague, Czechia
Device: PocketBook Pro 902
Copy the upgrade bin file to root directory your device and run upgrade. Just to be sure.
marty63 is offline   Reply With Quote
Advert
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
PRS-600 Stuck on Updating firmware now Jhorra Sony Reader 3 11-01-2010 06:11 PM
How to do a firmware upgrade!! Robertb Astak EZReader 1 02-07-2010 05:51 PM
Stuck in firmware update mode JurassicPunk Sony Reader 4 10-19-2009 05:06 PM
Help - firmware upgrade stuck amandajarrett Sony Reader 5 07-31-2008 09:04 AM
Reader stuck after partial firmware update wpaley Sony Reader 3 02-14-2007 08:56 AM


All times are GMT -4. The time now is 07:04 AM.


MobileRead.com is a privately owned, operated and funded community.