05-21-2010, 08:10 PM | #1 |
Member
Posts: 23
Karma: 10
Join Date: Aug 2008
Device: IREX ILIAD
|
Iliad could not be recognized by PC
Hello Everyone,
I am gettng an error message every time I am trying to connect my Iliad Second Edition to my PC. It says "Unknown USB device". I tried to connect it to different computers and changing connection mode to "Internal memory", 'MMC", USB Stick", "CF" at a time and it still gives me the same error. Any thoughts would be appreciated. |
05-24-2010, 10:36 AM | #2 |
Wizard
Posts: 4,293
Karma: 529619
Join Date: May 2007
Device: iRex iLiad, DR800SG
|
What OS is your PC (Windows 7, Mac, Linux... etc).
It might sound silly, but try a different USB port on the PC. |
05-24-2010, 04:01 PM | #3 |
Member
Posts: 23
Karma: 10
Join Date: Aug 2008
Device: IREX ILIAD
|
I tried on Win 7 and XP Pro. Unsuccessfully. It just does not see it. It says "USB device Not Recognized" because of malfunctioning. Maybe it is a travel hub related. Thanks for your input.
|
05-24-2010, 04:37 PM | #4 |
Wizard
Posts: 4,293
Karma: 529619
Join Date: May 2007
Device: iRex iLiad, DR800SG
|
The only other thing I can think of is to make sure the iLiad is in the content lister screen when you connect. But, if that were the problem, I don't think your PC would even see it.
Other than that, I'm not sure what else to try. It sounds like something with the hub, cable, or USB port on the PC. I've got a port on my PC at home that doesn't seem to work right no matter what I plug into it (probably not wired correctly). I always need to remember to use a different port when connecting anything. |
05-24-2010, 04:55 PM | #5 | |
Member
Posts: 23
Karma: 10
Join Date: Aug 2008
Device: IREX ILIAD
|
Quote:
Well, I guess I'll go and buy a new hub and see if this should do it. I heard that there is a way to make iLiad communicate with PC via Wi-Fi, thus allowing files to be shared between iLiad and PC over the network. My version is 2.12 and there was an upgrade to v. 2.9.1 that would allow such communication. Do you happen to know how and where I can get that upgrade? |
|
05-24-2010, 05:26 PM | #6 |
Wizard
Posts: 4,293
Karma: 529619
Join Date: May 2007
Device: iRex iLiad, DR800SG
|
Before I bought a new hub, I would try a new cable and/or port first, unless you've already tried that.
Regarding WiFi, yes that definitely works. That's how I sync data between my PC and iLiad at home. It's a little complicated to setup, but it works fine. Basically, you create a new directory on the PC and configure it as a "shared" directory under Windows. Then you enter in the Workgroup/Domain, server, username, password information that is needed to access that directory in a screen on the iLiad. The first time you connect from the iLiad it will build the right directory structure underneath the directory that you created. If you've never done any windows networking or windows sharing, it can be a little tricky to get all of the details right. You already have the latest update (2.12), and WiFi is supported on it. The 2.9 update you're talking about is a much older version. |
05-24-2010, 05:27 PM | #7 |
Wizard
Posts: 4,293
Karma: 529619
Join Date: May 2007
Device: iRex iLiad, DR800SG
|
Another option would be to just use a card reader and put a memory card directly into your PC and copy the files that way, then put the card into the iLiad. You wouldn't be able to use the iLiad's internal memory though without jumping through some other hoops to move data from a card to internal memory once it's back on the iLiad.
|
05-24-2010, 08:21 PM | #8 | |
Member
Posts: 23
Karma: 10
Join Date: Aug 2008
Device: IREX ILIAD
|
Quote:
|
|
05-25-2010, 01:41 AM | #9 |
Frenetic
Posts: 590
Karma: 8181
Join Date: Apr 2008
Location: Australia
Device: iLiad V2
|
kein, you will find instructions in the Knowledge base:
http://support.irexreader.com/s.nl/s...e.KB/KB.166/.f Click on connectivity, then "Can I transfer files with a wireless or wired network connection?". I can exchange files between my computer and iLiad wirelessly, but I prefer to use a CF card and card reader. |
05-25-2010, 01:43 PM | #10 | |
Member
Posts: 23
Karma: 10
Join Date: Aug 2008
Device: IREX ILIAD
|
Quote:
I have this issue I was discussing with Shaggy regarding an error message like "USB Device Not Recognized", and blaming it on travel hub. I was about to buy another one as an replacement, but I was talked out of it by the distributor whom I purchased my unit from. He mentioned the issue I was having was not a travel hub related, but software related and that it has happened before. Now, do you think if reflashing to original version would fix the problem? Thanks for your input |
|
05-25-2010, 01:58 PM | #11 | |
Wizard
Posts: 4,293
Karma: 529619
Join Date: May 2007
Device: iRex iLiad, DR800SG
|
Quote:
|
|
05-25-2010, 03:01 PM | #12 |
Member
Posts: 23
Karma: 10
Join Date: Aug 2008
Device: IREX ILIAD
|
Hi Shaggy,
He said iLiad software related because of him noticing this type of issue being reported before. So, he stopped me from buying another hub and suggested openining of a ticket with irex support, which I did. On my question about reflashing it and bringing back to original state he said it might help but he was not sure about it. I just would not want to reflash it for sake of it and need to know whether reflashing normally fixes this type of an issue. |
05-26-2010, 05:54 PM | #13 |
Wizard
Posts: 4,293
Karma: 529619
Join Date: May 2007
Device: iRex iLiad, DR800SG
|
I'd be curious what iRex tech support says, if you don't mind taking the time to share what you learn from them.
|
05-26-2010, 08:37 PM | #14 | |
Member
Posts: 23
Karma: 10
Join Date: Aug 2008
Device: IREX ILIAD
|
Quote:
After your iliad is connected to a pc, (screen on the iliad is 'device manager) your PC will be able to detected the iLiad as a USB external drive and will assign a drive letter on this drive, no extra usb driver needed. If the trouble is still persist, this can be happens if you installed the SDK, due some third party software will block the usb port access. So please provide me the serial nr. which I can validate SDK installed or not. As you read through it you could see that they are askling for my serial number which I have provided. And as long as they are looking to validate SDK installed on my iLiad, it makes me think positively regarding going for reflasnig of my device thus bringing it its original state. Maybe then it would allow to establish needed USB communication with my PC. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Troubleshooting K3 not being recognized by my laptop | LilCube | Amazon Kindle | 8 | 08-30-2010 11:10 PM |
Kindle 2i not recognized :( | Basekid | Calibre | 3 | 08-26-2010 05:06 AM |
PRS-600 Recognized on 1 PC, not on another PC??? | voyager | Sony Reader | 9 | 05-12-2010 09:51 PM |
PRS-300 Device not recognized | Traclo | Sony Reader | 1 | 09-10-2009 01:11 PM |
USB Stick cannot be recognized by Iliad | Enigma | iRex | 6 | 06-09-2008 08:32 AM |