My device is frozen... how can remove a battery?

Ivan68 · 05-21-2010, 06:09 AM

I would like remove a battery, but I donìt know how can remove an aluminium cover?
Help me

Brandobras · 05-21-2010, 06:33 AM

you don't need to remove it.
try this way:

Connect the Boox to the power for 30 minutes. Then disconnect it for 10 minutes. And then reconnect it again for few hours. One hour after reconnecting your Boox should be able to switch on.

if it doesn't work, you can find instructions about hard reset in this forum:

http://booxusers.com/viewtopic.php?f=7&t=11

regards

brandobras

Ivan68 · 05-21-2010, 07:27 AM

My problem is different... my device is always on (little blue light is on) and on/off switch don't works. I try your power change cicle (30 min, 10 min, same hours) but nothing has changed. I try with reset (my device have a little hole on the back for press the reset switch) but it's the same.

I see your video, but my problem is how I can remove an aluminium cover? I remove two little screws, but after I can't raise.

samerghafik · 05-21-2010, 04:10 PM

the same thing happened with me when i wanted to install a firmware, a blue light was always on. to rsove it you must remove the 2 screws then push the cover down it may need some force to do it, then disconnect the wire of the battery and reconnect it.

05-21-2010, 06:09 AM	#1
Ivan68 Junior Member Posts: 2 Karma: 10 Join Date: May 2010 Device: Onyx Boox 60	My device is frozen... how can remove a battery? I would like remove a battery, but I donìt know how can remove an aluminium cover? Help me

05-21-2010, 06:33 AM	#2
Brandobras Zealot Posts: 148 Karma: 2322 Join Date: Jan 2010 Location: Alicante (Spain) Device: Onyx T68	you don't need to remove it. try this way: Connect the Boox to the power for 30 minutes. Then disconnect it for 10 minutes. And then reconnect it again for few hours. One hour after reconnecting your Boox should be able to switch on. if it doesn't work, you can find instructions about hard reset in this forum: http://booxusers.com/viewtopic.php?f=7&t=11 regards brandobras Last edited by Brandobras; 05-21-2010 at 06:38 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PRS-505 PRS-505 Frozen, battery is full	kezza	Sony Reader	16	09-10-2011 09:05 AM
PRS-300 Screen frozen, can't turn off or reset, PC won't find device	sepinho	Sony Reader	24	11-06-2010 11:00 AM
PRS-300 Frozen, do I let the battery run down	frinck	Sony Reader	1	09-04-2010 12:37 PM
How do I remove the battery?	JapaG	Bookeen	4	02-27-2010 05:14 AM
Can not remove content from device	EvieE	Sony Reader	2	03-30-2009 05:21 PM

05-21-2010, 07:27 AM	#3
Ivan68 Junior Member Posts: 2 Karma: 10 Join Date: May 2010 Device: Onyx Boox 60	My problem is different... my device is always on (little blue light is on) and on/off switch don't works. I try your power change cicle (30 min, 10 min, same hours) but nothing has changed. I try with reset (my device have a little hole on the back for press the reset switch) but it's the same. I see your video, but my problem is how I can remove an aluminium cover? I remove two little screws, but after I can't raise.

05-21-2010, 04:10 PM	#4
samerghafik Member Posts: 10 Karma: 10 Join Date: Mar 2010 Location: spain Device: onyx boox	the same thing happened with me when i wanted to install a firmware, a blue light was always on. to rsove it you must remove the 2 screws then push the cover down it may need some force to do it, then disconnect the wire of the battery and reconnect it.

Advert