08-18-2010, 03:15 PM | #1 |
Edge User
|
E Ink Calibration
Hello, I can not find a solution for this anywhere.
I go to settings then display, and try to run the E-ink screen calibration utility. I click it and nothing happens. Has anyone experienced this? How did you fix this so that you can runt eh calibration? Thanks Brian |
08-18-2010, 03:19 PM | #2 |
Edge User
|
Well I answered my own question. The calibration utility will only work if you have the Eink setup so that it is on the left side in front of you. I had my configuration set for Eink on the right side. Now it works. So hopefully this helped someone else.
Brian |
08-18-2010, 05:25 PM | #3 |
Edge User
|
This is really odd behavior. We just tested what you said and were able to calibrate the e-ink side in "lefty" mode. What is your software version? If you try again in "lefty" mode does it still not work?
|
08-18-2010, 10:12 PM | #4 |
Edge User
|
Ok, I did it again and the same result no calibration utility when eink on the right. So I removed the battery waited a few minutes, ut it back in. restarted the tablet. THis time I go to try the calibration when Eink on right, and the utility works. So, I have no clue why. I'm current with the software.
Brian |
11-11-2010, 04:57 PM | #5 |
Edge User
|
Out of curiousity, how often do people find the eInk side needs to be recalibrated? Has anyone had any issues requiring frequent recalibration? I ask because I feel as though opening certain files (or even just time... maybe over the span of a few days) seems to cause the eInk screen to respond differently than it should (sometimes the line I draw appears 1+mm away from the stylus). Just curious if anyone else had experienced this or if it was normal.
Last edited by Dr. T; 11-11-2010 at 05:00 PM. |
11-11-2010, 07:25 PM | #6 |
Edge User
|
Rarely. I do it after a software update.
|
11-11-2010, 10:42 PM | #7 |
Edge User
|
|
11-12-2010, 02:03 AM | #8 |
Edge User
|
Same here. And I recalibrated the eInk side after switching it to the left side mode. Which all worked without any problem.
|
11-12-2010, 06:02 AM | #9 |
Edge User
|
Thanks for your replies, everyone!
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Improved Calibration | heyneman | iRex Developer's Corner | 4 | 11-16-2010 04:21 AM |
DR800 How do I do 'accurate stylus calibration'? | bokjeid | iRex | 18 | 05-06-2010 01:13 PM |
PRS-600 Screen calibration? | Jen Franklin | Sony Reader | 12 | 12-23-2009 09:54 AM |
At Last: *Front-Lit* E-Ink, Flexible E-Ink and ... E-Ink Watches! | NatCh | News | 1 | 10-27-2007 10:50 AM |
Calibration is Now working on the iLiad! | Adam B. | iRex | 1 | 05-14-2007 08:33 AM |