360 Plus 360 plus, 360 plus new and manual

[paola]

Originally Posted by kacir

For my PB360 PocketBook supplied generic USB charger. Nothing special. Not even bearing PB trademark.

PB360+ can be charged with any generic USB charger of reasonable quality

thanks Kacir, so they must have started to ship wall chargers only late in the day, as I seem to be the only one getting them!

[nausica]

Originally Posted by paola

does anybody know whether using a charger from the 360 will "fry" the 360+?

I use one wall charger for all my readers, its characteristics are
output 5V 1A
Usb ports of computers are the 5V 500mA.

Major difference between wall chargers for readers are the value of amperes, if the value is higher the reader will be charged faster, lower values ​​It takes more time.

What can burn the reader is the value of V, must always be 5V, and amperage required depends of the reader, for example my dead sony prs-350 is not loaded without 1A.

In specification (found on the official website), both readers have the same battery,
so you can use the charger from the 360 for 360+

[troll05]

All PB E-Ink-Readers chargeable via USB have more or less the same battery (different shape though),but 3,7V 1000 odd mAh I guess they have the same charging circuit. That means every generic USB charger 1000 mA+ will do for every device

[paola]

thank you all, I can confirm it did not fry

[jouda]

Hi.
I tried install 15.6 on 511, but installation (predictably) failed.

Originally Posted by nausica

Hi Paola,
My fw is 15.4 (17.10.2011)



http://dl.dropbox.com/u/39132661/Use...0_Plus(EN).pdf

EDIT:

I watched a bit and found that
my pb360+ is model 511 with processor FreeScale i.MX35 ARM11 533MHz,
and yet there is a new model 512 with fw 15.6 and processor Freescale 800MHz.

I'm wondering if I could install 15.6 fw on my model???