Kindle Touch/PW1/PW2 5.0.x - 5.4.4.2 JailBreak. Plus FW 5.x USBNetwork.

[Zirowe]

Originally Posted by dsmid

What is the exact name of the update file you are copying to Kindle ?
Didn't you change too much of its name when you renamed the file ?
Could you try again copying the original update file (+ the *.sh scripts) without renaming it ?

Never mind, when I tried for the 12th time it succeded.

Thanks for your help.

[NiLuJe]

@Zirowe: FWIW, I meant the 'clean up your USB root & reboot' part of the Q, even if the Q itself didn't match your symptoms.

[Zirowe]

Originally Posted by dsmid

What is the exact name of the update file you are copying to Kindle ?
Didn't you change too much of its name when you renamed the file ?
Could you try again copying the original update file (+ the *.sh scripts) without renaming it ?

I've already tried that and also with factory reset, but that wasn't the solution.

It "fixed" itself, and no I have jb.
Thanks.

[phoenix512]

Originally Posted by mikhails

Hi,

After jailbreak install
https://www.mobileread.com/forums/att...1&d=1386361598

Then install the files you need from
http://yadi.sk/d/SoDD1AsJDPvUu

(It has Readme in English)

That's it.

Good luck

I tried to use links mentioned above but the first one is dead.
I successfully installed jailbreak-1.8.N on my Kindle 5.4.2.1 but I don't know what to do next to change the margin
please help

[NiLuJe]

@phoenix512: I'm not sure kaznelson has published ready-made files for 5.4.2.1 yet (or if the 5.4.2 ones work on 5.4.2.1), so you'll have to ask him, or do it the hard way:

Cf. https://www.mobileread.com/forums/sho...postcount=1577 & https://www.mobileread.com/forums/sho...postcount=1588 &

[phoenix512]

Originally Posted by NiLuJe

@phoenix512: I'm not sure kaznelson has published ready-made files for 5.4.2.1 yet (or if the 5.4.2 ones work on 5.4.2.1), so you'll have to ask him, or do it the hard way:

Cf. https://www.mobileread.com/forums/sho...postcount=1577 & https://www.mobileread.com/forums/sho...postcount=1588 &

Thanks. I've just notice that *JAILBREAK* mark on setting page has gone! Is it normal!?

[NiLuJe]

@phoenix512: Yup, it's not a permanent tattoo on the Settings page, just a one-time visual feedback to confirm that the JB 'took' .

[phoenix512]

@NiLuJe: I'm new to all of this stuff. Searching for hours but I'm not sure where to start in order to apply patches. It's kind of you showing me the way, please ...

[phoenix512]

@NiLuJe: Could you please explain to me what should I do after installing JailBreak? Considering my 5.4.2.1. I do not know what to do with Java Bytecode Editor what's its role? how should I apply changes into my kindle like changing the margin
I'm stuck

[NiLuJe]

@phoenix512: My advice? Forget about the margins for now, until someones either confirms that the 5.4.2 package is okay on 5.4.2.1, or someones creates a package for 5.4.2.1.

[phoenix512]

@NiLuJe: Holly Toledo! Can I downgrade to 5.4.2?

[NiLuJe]

@phoenix512: I vaguely remember ixtab mentioning the fact that downgrading to 5.4.2 from 5.4.2.1 was oddly painful despite having an official full update, so, technically: yes (cf. the downgrade to 5.4.0 instructions from ixtab), easily: no.

[phoenix512]

Originally Posted by HobroWilly

Thank you very much!!

Your first link is dead. Could you please tell me what file should I install after JailBreak. I have a 5.4.2.1 and lingering to get rid of margin.

[phoenix512]

@NiLuJe: I've just installed ready-made files on my 5.4.2.1 but It seems nothing changed. No error

[knc1]

Originally Posted by phoenix512

@NiLuJe: I've just installed ready-made files on my 5.4.2.1 but It seems nothing changed. No error

Just **HOW** did you install them?

"How" as in what steps you took, commands used, destinations of files, etc.
Like in: Details please.