20090123 snapshot - Page 4

mvoosten · 02-18-2009, 08:09 AM

When can we expect a new snapshot build?

MrKayMrKay · 02-19-2009, 05:18 PM

Just to express my gratitude and my respect to the OI team for the incredible job so far!
I will not revert to the original firmware soon!

Many thanks to you all !

Спасѝбо !

kidambi502002 · 08-13-2009, 08:54 AM

My BEBook is blank and is dead! I do not know where to post this thread. Sorry, if I posted this in wrong place. Now, my problem:
I bought BEBook 1, 6” , a few months back. It had 2.01 firmware uptodated to 2.10 as in February before shipping the device. I was experimenting with the device flashing various firmwares. I did use OpenInkpot 0.1 live on external SD card which worked well. I even tried OI 0.2 live, a beta one, on the SD Card which also worked fantastic with any amount of font size enlargement and had no problem whatever opening prc and mobi formats and even pdf formats. However, I wanted to try it by flashing it on the internal storage which (OI 0.2) I did and even after this, it worked well. But suddenly, the screen went blank and inspite of my various attempts like – removing battery, resetting, recharging, etc. -- it is not coming to life. I tried to reflash with original firmware as well as OI 0.1, but all to no effect. For flashing I used 1GB Card provided by Endless Ideas. The red lamp is continuously always on and not flickering. I do not know what to do next with it. Any help will greatly welcome. Thanks in advance.

lunohod · 08-13-2009, 09:19 AM

Try to format your sd card using "hdd low level format tool". http://hddguru.com/content/en/softwa...l-Format-Tool/

kidambi502002 · 08-13-2009, 10:09 AM

Sir,
On the other forum, a gentleman advised me to remove the battery and with external power supply on to flash with the Feb.09 firmware. I did this, but it did not work out. However, removing the battery, going for external power (USB) supply and then getting back to battery power did the trick. I do not know the logic of all this. Your team may take a note of this behaviour for further improving the firmware.
Can I now confidently flash the OI 0.2 on the internal storage. If you advise me to do so, shall do it.
regards, K.Ramachandran:

dottedmag · 08-16-2009, 04:01 AM

> Your team may take a note of this behaviour for further improving the firmware.

You may try to figure out it's a kind of hardware problem.

08-13-2009, 08:54 AM	#48
kidambi502002 Junior Member Posts: 2 Karma: 10 Join Date: Jun 2009 Device: jetbook	My BEBook is dead after flashing OI 0.2 My BEBook is blank and is dead! I do not know where to post this thread. Sorry, if I posted this in wrong place. Now, my problem: I bought BEBook 1, 6” , a few months back. It had 2.01 firmware uptodated to 2.10 as in February before shipping the device. I was experimenting with the device flashing various firmwares. I did use OpenInkpot 0.1 live on external SD card which worked well. I even tried OI 0.2 live, a beta one, on the SD Card which also worked fantastic with any amount of font size enlargement and had no problem whatever opening prc and mobi formats and even pdf formats. However, I wanted to try it by flashing it on the internal storage which (OI 0.2) I did and even after this, it worked well. But suddenly, the screen went blank and inspite of my various attempts like – removing battery, resetting, recharging, etc. -- it is not coming to life. I tried to reflash with original firmware as well as OI 0.1, but all to no effect. For flashing I used 1GB Card provided by Endless Ideas. The red lamp is continuously always on and not flickering. I do not know what to do next with it. Any help will greatly welcome. Thanks in advance.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
snapshot 20091001	dottedmag	OpenInkpot	31	10-07-2009 04:32 PM
20090222 snapshot	dottedmag	OpenInkpot	24	05-23-2009 09:57 AM
snapshot 20090326	dottedmag	OpenInkpot	8	04-19-2009 07:12 AM
20090102 snapshot	dottedmag	OpenInkpot	30	02-08-2009 07:32 AM
New OpenInkpot Snapshot	Moe The Cat	OpenInkpot	9	11-30-2008 05:09 PM

02-18-2009, 08:09 AM	#46
mvoosten Zealot Posts: 128 Karma: 41 Join Date: Nov 2007 Device: Hanlin V3	When can we expect a new snapshot build?

02-19-2009, 05:18 PM	#47
MrKayMrKay Junior Member Posts: 9 Karma: 10 Join Date: Jan 2009 Location: Brittany, Earth, Solar System, Milky Way Device: Sony PRS-T1, iPhone 4s, iPad	Just to express my gratitude and my respect to the OI team for the incredible job so far! I will not revert to the original firmware soon! Many thanks to you all ! Спасѝбо !

08-13-2009, 09:19 AM	#49
lunohod OpenInkpot developer Posts: 211 Karma: 5627 Join Date: Mar 2008 Location: Stuttgart, Germany Device: N516,V3,PRS505,iLiad,eSlick,E60,K3,K4NT,M90,PB912,KoboMini	Try to format your sd card using "hdd low level format tool". http://hddguru.com/content/en/softwa...l-Format-Tool/

08-13-2009, 10:09 AM	#50
kidambi502002 Junior Member Posts: 2 Karma: 10 Join Date: Jun 2009 Device: jetbook	Sir, On the other forum, a gentleman advised me to remove the battery and with external power supply on to flash with the Feb.09 firmware. I did this, but it did not work out. However, removing the battery, going for external power (USB) supply and then getting back to battery power did the trick. I do not know the logic of all this. Your team may take a note of this behaviour for further improving the firmware. Can I now confidently flash the OI 0.2 on the internal storage. If you advise me to do so, shall do it. regards, K.Ramachandran:

08-16-2009, 04:01 AM	#51
dottedmag OpenInkpot co-founder Posts: 407 Karma: 845 Join Date: Dec 2007 Device: Kindle Oasis	> Your team may take a note of this behaviour for further improving the firmware. You may try to figure out it's a kind of hardware problem.

Advert

Advert