02-18-2011, 05:54 PM | #1 |
Enthusiast
Posts: 35
Karma: 46
Join Date: Apr 2010
Device: dr800sg
|
DR800 won't boot up
Hello all,
My DR800SG will not boot up. It seems to be stuck on the very first screen that has the guy reading a book with lots of circles with IREX in the top right and the Adobe logo in the bottom left. I have read a few other posts with similar problems and tried the following to resolve it with no result: 1. Disconnected battery for 1min, 5min, overnight then tried switching it back on. 2. Charged it overnight. 3. Reset it by sliding the on button leftwards up to 20-30 times in a row. 4. Tried turning it on whilst connected to charger with and without the battery. 5. As above but connected to PC via usb. Does anyone else have any other advice to help me fix my beloved ereader? I haven't used it in months and really got very little use out of it considering how much it cost me. I would hate to think that it is bricked. PS. Seeing as Irex is now kaput are any and all warranty claims now useless aswell? Drop Bear. |
02-18-2011, 05:56 PM | #2 |
Enthusiast
Posts: 35
Karma: 46
Join Date: Apr 2010
Device: dr800sg
|
I should add that the orange light comes on with recharging and the green light stays on all the time when I unplug it.
|
Advert | |
|
02-18-2011, 08:29 PM | #3 |
Addict
Posts: 326
Karma: 6908
Join Date: Sep 2010
Device: DRs, EE, ipad/iphone, Helix
|
when this happened to me, I extracted the SD card and connected it directly through a card reader to the computer. then I reformatted it, installed the latest beta firmware rc3 on it and all worked again ...
|
02-19-2011, 01:25 AM | #4 |
Enthusiast
Posts: 35
Karma: 46
Join Date: Apr 2010
Device: dr800sg
|
This sounds promising.
I also had an old SD card with RC1 on it but that did not do anything when I rebooted with it in my reader. How do you install RC3 directly onto the SD card? I have updated in the past but that required me to update via menus in an operating DR800. |
02-19-2011, 04:24 AM | #5 |
Addict
Posts: 326
Karma: 6908
Join Date: Sep 2010
Device: DRs, EE, ipad/iphone, Helix
|
you have to extract the update in the root folder of the reformatted card, so that you have /System/update/ with the various files in it on the card, well, no guarantee it will work though ...
|
Advert | |
|
02-19-2011, 09:03 AM | #6 |
Junior Member
Posts: 6
Karma: 10
Join Date: Aug 2009
Device: prs-500, DR800SG
|
I'm having the same problem: After a reboot I get the startup screen, then the "dots" within the center circle till its filled, a screen flash, return to the start up screen w/o the" dots" and it locks up.
It all started when I attempted to open an epub book and it locked up. Go figure. I will try the card format (FAT 32?) with the latest Rc3 software. Will let you know the results. |
02-19-2011, 10:00 AM | #7 |
Junior Member
Posts: 6
Karma: 10
Join Date: Aug 2009
Device: prs-500, DR800SG
|
Thank you! It's back working! What I did:
1) Format 2gb sd card from IREX 800sg on PC in FAT format 2) Unzipped RC3 obtained from (http://updates.irexnet.com/beta/dr800sg/) contents to SD card 3) Put it all back into the 800sg, plugged it in, waited about 30 min. for battery to recharge and now at the "Setup- Time & Date" screen. |
02-19-2011, 10:11 AM | #8 |
Guru
Posts: 999
Karma: 19985
Join Date: Dec 2008
Location: Netherlands
Device: iRex DR1000S
|
Maybe the problem is in the global.db file. This file is updated during boot time (it contains information about all documents on the DR). If that file is corrupt it might hangup the DR.
(A crash/reset of the DR might lead to a corrupted global.db) |
02-19-2011, 10:57 AM | #9 |
Enthusiast
Posts: 35
Karma: 46
Join Date: Apr 2010
Device: dr800sg
|
Thanks for the instructions.
None of this is working for me. I have tried a blank SD with just the RC3 files extracted on it and an old RC1 with the global.db file deleted and I can't even get to the rotating dots screen. Any other ideas or is this truly bricked? |
06-30-2011, 06:01 AM | #10 |
Member
Posts: 17
Karma: 96
Join Date: Jul 2008
Device: Sony Reader PRS-505
|
DropBear - Did you get this sorted?
I have exactly the same problem - followed instructions above but no joy. After reformat microSD, add rc3 system\update, disconnect/reconnect battery orange lamp lit. When switch on, I get the green light, screen flashes off/on and then just geezer sitting there reading his book - no animated ring of dots - nada.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DR800 ANN: DR800+. Port of some DR1000 features to the DR800 | Iñigo | iRex | 274 | 04-05-2013 02:24 PM |
Boot Time | jbcohen | General Discussions | 6 | 12-23-2010 12:45 PM |
Opus cannot boot, stuck on boot screen | baloma | Bookeen | 35 | 11-13-2010 04:20 AM |
iLiad My Iliad doesn't boot | miguel.ossa | iRex | 1 | 08-14-2010 12:21 PM |
Gen3 won't boot. | pdurrant | Bookeen | 3 | 03-14-2009 03:37 AM |