12-11-2016, 06:49 AM | #2326 |
Member
Posts: 10
Karma: 10
Join Date: Dec 2016
Device: kindle
|
I agree with you, it was unfair regarding the hard work to code.
It was too impulsive, now I regret it. I'm not a hardcore geek and spending a lot of time and taking the risk to brick my Kindle just for a cover was not a good deal. I prefer reading than tweaking computers. I was in the 5.7.3 and downgraded to the 5.4.3.2. After the v5.4 jailbreak (success) it was impossible to launch KUAL.2.7 So I decided to upgrade to the 5.8.7 to give up the jailbreak Miracle, after this upgrade I was able to launch KUAL, so I installed mrinstaller 1.6N and ScreenSaver 0.24. Now, I have the message "SW failed to process cover" at the bottom of the screen while reading. I did some research and the advices were to use the last version. May be it's due to the very last FW 5.8.7. If you have some advices I'll be happy to put into practice. |
12-11-2016, 06:55 AM | #2327 |
Member
Posts: 10
Karma: 10
Join Date: Dec 2016
Device: kindle
|
Additional information, I'm using PDF koreader and it work.
|
Advert | |
|
12-11-2016, 08:44 AM | #2328 | |
Going Viral
Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
|
Quote:
Those add-in versions are found here: https://www.mobileread.com/forums/sho...d.php?t=225030 |
|
12-11-2016, 02:25 PM | #2329 |
Member
Posts: 10
Karma: 10
Join Date: Dec 2016
Device: kindle
|
I read Python was mandatory for the cover display, so in case of, I installed python : Update_python_0.14.N_k2_install.bin
I updated the screenSaver from 0.24N to 0.47N The ScreenSaver said it was OK like before. I selected the cover mode and restarted the framework. And again the message : "SW Failed to process cover" My Kindle is a Intl model : PW2IL, and the screen saver .bin is named : "Update_ss_0.47.N_k2_dx_k3_install.bin" May be I need the k2i one ? In the link you gave me the jailbrake is kindle-jailbreak-0.13.N And I used the "kindle-5.4-jailbreak" Is my jailbrake bad ? However the pdf reader work fine. Or it is because of my too recent 2_5.8.7 version ? |
12-11-2016, 03:44 PM | #2330 | |
Going Viral
Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
|
Quote:
The K2 was the second model Kindle ever produced, introduced in February 2009, I don't think you have that one. Use the proper file, you will have much better luck. And get all of the packages from the link I gave you above. |
|
Advert | |
|
12-12-2016, 02:09 PM | #2331 |
Member
Posts: 10
Karma: 10
Join Date: Dec 2016
Device: kindle
|
Initially I was in this version : update_kindle_paperwhite_v2_5.7.3.bin
I downgraded to this version : update_PW2_5.4.3.2_initial.bin I jailbreaked with : kindle-5.4-jailbreak I installed : KUAL-KDK-2.0.azw2 I installed : kual-mrinstaller-1.6.N The Screen Saver : Update_linkss_0.24.N_install_pw2_kt2_kv_pw3_koa_kt 3.bin KUAL refused to run So I upgraded to : update_kindle_paperwhite_v2_5.8.7.bin After that, KUAL was up and running. But the screen saver was in this state : "SW Failed to process cover" I installed : Update_python_0.14.N_k2_install.bin And Update_ss_0.47.N_k2_dx_k3_install.bin The Screen Saver is again in the "SW Failed to process cover" state. Is there something wrong in this workflow ? |
12-12-2016, 02:53 PM | #2332 |
Going Viral
Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
|
You DO NOT have a K2 device, stop using that file.
|
12-13-2016, 03:38 PM | #2333 |
Member
Posts: 10
Karma: 10
Join Date: Dec 2016
Device: kindle
|
You sent me this link : https://www.mobileread.com/forums/sho...d.php?t=225030
With the advice to use the last version. I didnt saw the thread was from 2013 and I confused between Kindle 2 and Kindle Paper White 2. So initialy I was using all the good packages. And it didn't work. I think the Python K2 version didn't install and I re install the "Update_linkss_0.24.N_install_pw2" I used this clear install advices : "http://www.ereader-palace.com/4-must-have-plugins-to-install-after-jailbreaking-kindle/" So the question remains, what is wrong ? The error under KUAL is : SW failed to process cover
Entries 1 - 5 of 5 v2.7 (20160721,a) PW2 |
12-13-2016, 04:39 PM | #2334 |
Going Viral
Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
|
What is in the ss log files?
I do not use the ss add-in myself, so I can't be of much help. Your best bet would be to use the troubleshooting guide NiLuJe wrote. Last edited by knc1; 12-13-2016 at 04:44 PM. |
12-14-2016, 08:03 AM | #2335 |
Member
Posts: 10
Karma: 10
Join Date: Dec 2016
Device: kindle
|
I installed Python pw2 from this link : https://www.mobileread.com/forums/sho...d.php?t=195474
And re install SS 0.24N. Now the error has disappeared but it doesn't work. I bet SS 0.24 and my FW are incompatible. Thank you for your help. |
12-14-2016, 09:01 AM | #2336 |
Going Viral
Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
|
Did you open the spoiler, read, and use the troubleshooting information on that page?
What did you find? |
12-15-2016, 03:53 PM | #2337 |
Member
Posts: 10
Karma: 10
Join Date: Dec 2016
Device: kindle
|
I'm tough
I reseted my Kindle. Downgraded my Kindle. Jailbreaked Success Installed KUAL Again I was unable to lauch KUAL mrinstaller Upgrade to 5.7.3 (and not the 5.8.7) Now I'm able to launch KUAL SS 0.24 .... and ..... now it works. So, my opinion is SS is not compatible with the very last 5.8.7 I'll stuck on this version and I will read the last Connelly Now I would like to find a hack to read the summary of books like with my old Kobbo. But may by the summary is not in a mobi file ? Do you know ? |
12-15-2016, 04:16 PM | #2338 | |||
Going Viral
Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
|
Quote:
Nothing that we post is tested to run on **FACTORY** firmware. Quote:
Quote:
|
|||
12-16-2016, 07:05 AM | #2339 |
Enthusiast
Posts: 42
Karma: 20
Join Date: Aug 2015
Device: kindle pw4
|
|
12-16-2016, 12:58 PM | #2340 |
Member
Posts: 10
Karma: 10
Join Date: Dec 2016
Device: kindle
|
>i'm using SS with latest 5.8.7 firmware. Works fine.
I dont know why but now when I copy the 5.8.7 in the root of my Kindle, the file disapear. Why ? How to upgrade to the 5.8.7 ? |
Tags |
kindle touch hacks, paperwhite, python, screensavers, touch |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem installing Kindle ScreenSavers Hack | ratchetclank | Kindle Developer's Corner | 3 | 12-30-2015 09:59 PM |
Is it impossible to hack screensavers in K4 4.1? | nonfactor | Kindle Developer's Corner | 1 | 07-04-2012 07:17 PM |
Help! Used screensaver hack- now all collections gone and no screensavers!!! | kuklachica | Amazon Kindle | 1 | 01-16-2011 08:17 PM |
Is a hack necessary to add screensavers? | mldavis2 | Amazon Kindle | 4 | 10-29-2010 05:34 PM |
Hack for screensavers on Kindle 2 | KookyKathy | Introduce Yourself | 5 | 01-09-2010 11:16 PM |