09-30-2012, 11:07 AM | #1 |
Enthusiast
Posts: 38
Karma: 10
Join Date: Jan 2010
Device: Kindle 2
|
Calibre to Android - wired?
I've tried working with Calibre companion on my Android tablet but I've given up. The wireless connection randomly works (mostly not) and it's just too frustrating to continually stop and restart the server, cycle power on my router, set and reset the IP address etc. just to get a book to appear on my tablet. Given that my PC and tablet are in the same house, it would be easier to just plug it in.
So, I plug the table into my PC and the Android file system is now visible in my Windows Explorer window. I can copy files to it from the PC. The only problem i have is that the ebooks I've copied to the tablet I can't seem to open. On the tablet, I have Kindle for PC, Aldiko, Calibre Companion, and "My Library" (which came with the tablet). If I try to open a .mobi file the tablet says it has no idea how to open that type of file. Is there a way, in Calibre on the PC to simply copy, or send the books I'm interested in via the wired connection to the tablet? I tried "send to device" but I don't see the tablet listed and all of the options that say "Send to xyz" are grayed out. Note: sometimes the options aren't grayed out but Send to main memory sends the books to some unknown location. i tried connect/share -> Connect to folder but no matter what folder I pick on the tablet it complains about it. I tried copying the books (using windows explorer) from where they are stored on my PC, directly to a directory on my tablet (i.e. a folder called ebooks). And then in Calibre Companion, under "book formats and folders", I changed the default folder to point to the folder where I had copied the books. But the companion does not see them. Note: that when I copied them from the pc I copied the calibre folder which contains .mobi file, the cover.jpg and the metadata.opf file. so therefore, the ebooks folder on the tablet actually contains folders which contain books. Perhaps that level of indirection is an issue? This doesn't seem like it should be so hard, does it? All I want to do is copy books to my tablet and read them. I'd rather do it with Calibre because it's the best ebook organizer I've ever found. |
09-30-2012, 11:22 AM | #2 |
Well trained by Cats
Posts: 29,804
Karma: 54830978
Join Date: Aug 2009
Location: The Central Coast of California
Device: Kobo Libra2,Kobo Aura2v1, K4NT(Fixed: New Bat.), Galaxy Tab A
|
You need to configure the preferred format in the (your model) device driver being used to make Mobi not the first one FOUND to send or get a App that reads Mobi . Be sure to remove the ticks for all unsupported formats.
WiFi can be magic. Usually if it works reliably for other applications, it should just Work for this one. |
Advert | |
|
09-30-2012, 12:47 PM | #3 | ||||||
Grand Sorcerer
Posts: 11,742
Karma: 6997045
Join Date: Jan 2010
Location: Notts, England
Device: Kobo Libra 2
|
Quote:
Quote:
Quote:
Quote:
Quote:
You should not copy books directly out of your library. Instead, use "Save to Disk" or "Connect to Folder" to export the books to some folder on your computer, then copy them from there. Quote:
|
||||||
09-30-2012, 04:16 PM | #4 |
Enthusiast
Posts: 38
Karma: 10
Join Date: Jan 2010
Device: Kindle 2
|
Thanks chaley, that got me off to a good start.
Here's where I am now: Installed 0.9.0. Now when I plug in my tablet (to the PC running Windows 7), Calibre recognizes it as a device. And I configured the tablet so that epub is the preferred format because the Aldiko reader on my tablet can read epub. (Note: this entire thread is assuming there is no DRM on the books I'm talking about) Now, in Calibre on the PC, I can choose a book and use Send to Device and the book appears in the folder on the tablet that I specified in Calibre Companion (i.e. I went into the book format and locations option in the companion and set the folder for the epub books to be a folder called "ebooks"). Calibre converts my book to epub and sends it to the folder on the tablet. All is good, right? I can open the Aldiko reader on the tablet and tell it to import the book(s) from that folder. And I can open the book and read it. So far so good. However, I still don't see any evidence that the Calibre Companion ap has any idea that I've transferred books from my PC. In other words, the companion performs no other function other than letting me choose the folder to which I've downloaded the books. Is there any way to use the Calibre companion to do anything useful? Perhaps view the list of books in my library? Allow me to choose books from the library (on my PC) and copy them to the tablet? Or show me the books on the tablet that I've already downloaded? I'm tired of fighting the wifi battle. It never works right in my house. I ran wired ethernet to every room in the house and now I don't have to deal with it any more (mostly). |
09-30-2012, 04:33 PM | #5 | ||||
Grand Sorcerer
Posts: 11,742
Karma: 6997045
Join Date: Jan 2010
Location: Notts, England
Device: Kobo Libra 2
|
Good!
Quote:
Quote:
Quote:
Quote:
I had a similar problem in my apartment as you seem to have in your house. My apt is fully cabled with cat 6 cables (cost me a pretty penny), but that didn't do squat for devices that don't have RJ45 connections such as phones and tablets. Unfortunately, my "standard" wifi access point (the one provided by the ISP) does not reach several rooms in the apartment. This was unacceptable, so I connected a second wifi access point (a router that I had sitting in a box) to the cable at the far end of the apartment and gave it a somewhat different SSID. Now my various phones and tablets switch automatically between the primary and the secondary access point as I move around my apartment. Problem solved. |
||||
Advert | |
|
09-30-2012, 07:36 PM | #6 |
Enthusiast
Posts: 38
Karma: 10
Join Date: Jan 2010
Device: Kindle 2
|
Actually, the basic wifi functions on the android tablet work fine. Email, browsing etc. (yes it would be somewhat useless if that didn't work).
But unfortunately Calibre Companion isn't the same animal. It's relying on IP address and ports and I suspect that's where the problem is. I am not using static IP addresses (too many devices in the house I'd have to mess with to get everyone set up as static) so the IP address on my PC changes. Yes, I've checked the IP. I know what the address is. I've gone into Calibre and have set the wireless device connection Ip and port. And I've gone into CC and set the identical values. But when I tell CC to connect it keeps telling me that the IP address is wrong. I've set and reset these dozens of times and restarted both the PC ap and the droid ap. And every once in a while it connects and works. But 95% of the time it fails. Meanwhile, the tablet has no trouble getting to the internet to check my mail or browse. So I know my wireless router is working. I uninstalled the CC ap, and reinstalled it and started over again. It finally connected via wifi. But I've done this before. By tomorrow it will have quit working again. That's why I wanted to switch to wired. Then I don't have to deal with IP addresses, ports, wireless etc. |
09-30-2012, 09:11 PM | #7 | |
Well trained by Cats
Posts: 29,804
Karma: 54830978
Join Date: Aug 2009
Location: The Central Coast of California
Device: Kobo Libra2,Kobo Aura2v1, K4NT(Fixed: New Bat.), Galaxy Tab A
|
Quote:
|
|
10-01-2012, 02:42 AM | #8 | ||
Grand Sorcerer
Posts: 11,742
Karma: 6997045
Join Date: Jan 2010
Location: Notts, England
Device: Kobo Libra 2
|
Quote:
My suspicion is that you were running a version of calibre that did not support the improvements we made to CC & calibre to help CC find calibre. Those improvements appeared in calibre 0.8.67, two versions after CC support was first introduced in calibre. Quote:
In any event, theducks suggestion is a good one, and one that I have used for many years. If you set up a static lease on your router (in the DHCP section), then in effect the computer with the MAC address in the lease has a fixed IP address but doesn't know it. No parameters are changed on the computer. I do this for all our desktop computers because it makes sharing over the network easier (somewhat faster recognition that the computer has been turned on). I also do it for main router, our secondary wireless access point, our NAS (Network Accessible Storage) boxes, and our network VoIP box to make connecting to their web admin interface easier. I find it much easier to set up static leases than to fight with each device's configuration options. I don't bother for our laptops or phones, or with computers brought in by our friends when they visit. |
||
10-07-2012, 02:36 PM | #9 |
Enthusiast
Posts: 43
Karma: 34216
Join Date: Feb 2009
Location: Fort Collins, CO
Device: Sony Reader PRS-500, Kindle Fire, Aldiko on LG Optimus Elite
|
I've been playing around with this. The best setup I've found is to export the mobi file to disk, rename it to remove all spaces, and change the extension to prc. Then you can copy it via USB to the Android/data/com.amazon.kindle/files. Then force close the Kindle app and reload it. 2 out of 3 times I've done this, the book will appear. If you fail to remove the spaces or fail to change the extension, the Kindle app will either not see the book at all or simply delete ALL your books off your phone.
|
10-08-2012, 01:34 AM | #10 | ||
US Navy, Retired
Posts: 9,864
Karma: 13806776
Join Date: Feb 2009
Location: North Carolina
Device: Icarus Illumina XL HD, Nexus 7
|
Quote:
Quote:
Let us know when you have something that works every time. |
||
Tags |
tablet, wired |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Android App] Best Android reader software for use with Calibre / Calibre Companion | ellett | Devices | 11 | 12-16-2012 04:27 PM |
[Android App] Coming: Android app to connect as a device to calibre using wifi | chaley | Devices | 92 | 09-07-2012 08:24 PM |
[Android App] Beta version: Android app to connect as a device to calibre using wifi | chaley | Devices | 116 | 08-27-2012 12:42 PM |
Calibre on Android | jabberwock_11 | Calibre | 1 | 04-09-2012 05:27 AM |
Calibre Gets Some Love (?) From Wired | Gideon | Calibre | 6 | 10-30-2009 06:29 PM |