Iliad Dead?

DeathtoToasters · 12-02-2007, 10:23 PM

Well I have been reading it on and off all day.

I go to turn it on and nothing happens.....if I plug the power in, the light turns red. When I try to switch it on...the red light shuts off and on. Then nothing...

Tried reset button, Nothing.

Only had it a week.

Any ideas?

DeathtoToasters · 12-02-2007, 10:34 PM

Ok, now it turns on. Thought maybe it was a low battery, but it is showing full.

Hmmmmm I really expected it to be a heck of alot more stable. It is just a reader.

DeathtoToasters · 12-02-2007, 10:51 PM

Another update...now it won't turn on again....this is frustrating

Everytime I push the power button on the red light blinks very fast.

Gogolo · 12-03-2007, 03:08 AM

I suppose you have to send it back to iRex. This is not normal behavior.
This is bad.

Greetings
Gogolo

nekokami · 12-03-2007, 07:37 AM

Try removing all memory cards and see if it will restart. It's a long shot, but could save your iLiad a trip back to iRex.

nekokami · 12-03-2007, 07:39 AM

And don't forget to use the "reset" button on the back to make sure it really is off before you remove the cards.... You can also try reflashing the firmware from CF.

DeathtoToasters · 12-03-2007, 08:52 AM

Quote:

Originally Posted by nekokami

Try removing all memory cards and see if it will restart. It's a long shot, but could save your iLiad a trip back to iRex.

Tried it multiple times...

Quote:

Originally Posted by nekokami

And don't forget to use the "reset" button on the back to make sure it really is off before you remove the cards.... You can also try reflashing the firmware from CF.

How am I able to do that if I cannot get it to boot up at all?

DeathtoToasters · 12-03-2007, 12:32 PM

can someone give me instructions for setting the iliad back to factory setup, so I can make sure I didn't just brick it.

Thanks

Tulkas · 12-03-2007, 01:55 PM

Instructions how to reflash/unbrick from CF card

http://developer.irexnet.com/dev_fil...%20howto_0.pdf

You should be able to download the reflash files from your MyIrex account

DeathtoToasters · 12-03-2007, 02:01 PM

Well got it re-flashed and it loaded 2.10 on the device with no mobipocket software. I ran the actual irex update from the device and it updated it to the 2.11 and added the mobipocket software back.

I don't know what bricked it as I put nothing new on the device for at least 3 days. I am going to install the ipdf full screen and bookmark versions and then nothing else. See if that stops it from happening again.

That is very strange.

DeathtoToasters · 12-03-2007, 07:26 PM

Well after everything was running fine, I reinstalled 'all in one pdf' and it bricked it again. Of course I left the adapter at the office so I am stuck until I go pick it up.

This is really not good and pissing me off.

I know I did install third party software, but still.

Anyway, I tried to reflash it, but without the power adapter it won't do anything. no red or green lights.

tribble · 12-03-2007, 07:30 PM

you probably got the wrong installer. There are installers which check for the appropriate firmwareversion. You prabably have an installer that doesnt check and is made for 2.11 initially. In 2.11 the registry format has changed, and that is proobably causing your bricking.

DeathtoToasters · 12-03-2007, 07:51 PM

[QUOTE=tribble;123290]you probably got the wrong installer. There are installers which check for the appropriate firmwareversion. You prabably have an installer that doesnt check and is made for 2.11 initially. In 2.11 the registry format has changed, and that is proobably causing your bricking.[/QUOTE

Well after I reflashed it the first time, I then updated the firmware, which I assume flashed it to 2.11 I actually didn't check that.

Then I installed the all in one.

Should I need the power adapter inserted to have to reflash?

12-02-2007, 10:23 PM	#1
DeathtoToasters Connoisseur Posts: 86 Karma: 10 Join Date: Nov 2007 Device: Irex Illiad, Sony 505	Iliad Dead? Well I have been reading it on and off all day. I go to turn it on and nothing happens.....if I plug the power in, the light turns red. When I try to switch it on...the red light shuts off and on. Then nothing... Tried reset button, Nothing. Only had it a week. Any ideas?

12-02-2007, 10:34 PM	#2
DeathtoToasters Connoisseur Posts: 86 Karma: 10 Join Date: Nov 2007 Device: Irex Illiad, Sony 505	Ok, now it turns on. Thought maybe it was a low battery, but it is showing full. Hmmmmm I really expected it to be a heck of alot more stable. It is just a reader. Last edited by DeathtoToasters; 12-02-2007 at 10:38 PM.

12-02-2007, 10:51 PM	#3
DeathtoToasters Connoisseur Posts: 86 Karma: 10 Join Date: Nov 2007 Device: Irex Illiad, Sony 505	Another update...now it won't turn on again....this is frustrating Everytime I push the power button on the red light blinks very fast. Last edited by DeathtoToasters; 12-02-2007 at 10:59 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Digitizer half-dead on ebayed Iliad :(	kosmarnik	iRex	11	05-02-2009 02:48 AM
iLiad dead :(	thetechnobear	iRex	6	10-06-2008 07:23 AM
iLiad dead ?	zeuskeu	iRex	4	03-07-2008 01:16 PM
My iLiad is dead, please help!!!	Hanson	iRex	3	07-09-2007 08:36 PM
"Dead" iLiad	BlackRat	iRex	13	01-17-2007 12:14 PM

12-03-2007, 03:08 AM	#4
Gogolo Addict Posts: 353 Karma: 92 Join Date: Sep 2007 Device: DR1000S, Nook ST (rooted), Kobo Aura one (ksm)	I suppose you have to send it back to iRex. This is not normal behavior. This is bad. Greetings Gogolo

12-03-2007, 07:37 AM	#5
nekokami fruminous edugeek Posts: 6,745 Karma: 551260 Join Date: Oct 2006 Location: Northeast US Device: iPad, eBw 1150	Try removing all memory cards and see if it will restart. It's a long shot, but could save your iLiad a trip back to iRex.

12-03-2007, 07:39 AM	#6
nekokami fruminous edugeek Posts: 6,745 Karma: 551260 Join Date: Oct 2006 Location: Northeast US Device: iPad, eBw 1150	And don't forget to use the "reset" button on the back to make sure it really is off before you remove the cards.... You can also try reflashing the firmware from CF.

12-03-2007, 12:32 PM	#8
DeathtoToasters Connoisseur Posts: 86 Karma: 10 Join Date: Nov 2007 Device: Irex Illiad, Sony 505	can someone give me instructions for setting the iliad back to factory setup, so I can make sure I didn't just brick it. Thanks

12-03-2007, 01:55 PM	#9
Tulkas Enthusiast Posts: 44 Karma: 10 Join Date: Jun 2007 Location: London, UK Device: iLiad, CyBook Gen3, iPod Touch, PB 360	Instructions how to reflash/unbrick from CF card http://developer.irexnet.com/dev_fil...%20howto_0.pdf You should be able to download the reflash files from your MyIrex account

12-03-2007, 02:01 PM	#10
DeathtoToasters Connoisseur Posts: 86 Karma: 10 Join Date: Nov 2007 Device: Irex Illiad, Sony 505	Well got it re-flashed and it loaded 2.10 on the device with no mobipocket software. I ran the actual irex update from the device and it updated it to the 2.11 and added the mobipocket software back. I don't know what bricked it as I put nothing new on the device for at least 3 days. I am going to install the ipdf full screen and bookmark versions and then nothing else. See if that stops it from happening again. That is very strange.

12-03-2007, 07:26 PM	#11
DeathtoToasters Connoisseur Posts: 86 Karma: 10 Join Date: Nov 2007 Device: Irex Illiad, Sony 505	Well after everything was running fine, I reinstalled 'all in one pdf' and it bricked it again. Of course I left the adapter at the office so I am stuck until I go pick it up. This is really not good and pissing me off. I know I did install third party software, but still. Anyway, I tried to reflash it, but without the power adapter it won't do anything. no red or green lights.

12-03-2007, 07:30 PM	#12
tribble iLiad Maniac Posts: 1,382 Karma: 2369 Join Date: Apr 2006 Location: Germany Device: Bookeen Opus (i love that thing) and iPad (what an irony)	you probably got the wrong installer. There are installers which check for the appropriate firmwareversion. You prabably have an installer that doesnt check and is made for 2.11 initially. In 2.11 the registry format has changed, and that is proobably causing your bricking.

12-03-2007, 07:51 PM	#13
DeathtoToasters Connoisseur Posts: 86 Karma: 10 Join Date: Nov 2007 Device: Irex Illiad, Sony 505	[QUOTE=tribble;123290]you probably got the wrong installer. There are installers which check for the appropriate firmwareversion. You prabably have an installer that doesnt check and is made for 2.11 initially. In 2.11 the registry format has changed, and that is proobably causing your bricking.[/QUOTE Well after I reflashed it the first time, I then updated the firmware, which I assume flashed it to 2.11 I actually didn't check that. Then I installed the all in one. Should I need the power adapter inserted to have to reflash?

Advert

Advert