Nand chip problem?

Rob_S · 07-01-2008, 06:19 PM

For a while my eReader v3 has occasionally be giving me an error message when I switched it on:

Quote:VERSION: 1.0.4 2007-09-05
Current Frequency is 100
Nand chip not recognised
Checking Sim Card
SIM CARD NOT EXIST
...

Normally using the reset button fixed the problem, but now it won't display anything else. Reflashing the firmware doesn't help either. Does my eReader need to go back for repairs? I've only had it just over a month!

(I've posted this in jinke's own forums - will let you know if I get a response there too!)

dottedmag · 07-02-2008, 11:11 AM

Yes, looks like a hardware problem.

sweetcream · 07-03-2008, 05:52 PM

That has never happened to me either. It definately sounds like hardware defect.

Crisby · 07-03-2008, 10:48 PM

I haven't seen this error before either.

You can access your sim card if you remove the battery cover and battery.

I suggest you remove and replace the sim card to check its seated correctly.

dottedmag · 07-05-2008, 09:50 AM

THE problem is here: "Nand chip not recognised"

SIM cards are not installed by default in V3 readers.

Crisby · 07-05-2008, 08:08 PM

Quote:

Originally Posted by dottedmag

THE problem is here: "Nand chip not recognised"

SIM cards are not installed by default in V3 readers.

My HanLin V3 came with a pre-installed sim card, direct from Jinke. I just had to install the battery myself.

dottedmag · 07-15-2008, 01:07 PM

And I've got lBook V3 (the same hardware as Hanlin) without sim card at all. I suppose your will function just fine without it.

iterati · 07-15-2008, 01:11 PM

I suspect that SIM is there for DRM support. Either way, you don't need it.

Crisby · 07-15-2008, 10:55 PM

Interesting that lBooks don't come with sim cards installed.

I think you're both right, dottedmag and iterati. I took the sim card out and the only difference I can see is that my HanLin started with the instructions document open in landscape view, rather than the usual contentlister menu.

I don't have any DRM books on my HanLin, though.

Rob_S · 11-28-2008, 08:26 AM

Quote:

Originally Posted by Rob_S

For a while my eReader v3 has occasionally be giving me an error message when I switched it on:

Quote:VERSION: 1.0.4 2007-09-05
Current Frequency is 100
Nand chip not recognised
Checking Sim Card
SIM CARD NOT EXIST
...

Sorry, I forgot to post an update. I did send my eReader back and got a replacement. It was a hardware fault - there isn't supposed to be a sim card or anything like that!

All working 100% now

07-01-2008, 06:19 PM	#1
Rob_S Junior Member Posts: 2 Karma: 10 Join Date: Jul 2008 Device: Hanlin eReader v3	Nand chip problem? For a while my eReader v3 has occasionally be giving me an error message when I switched it on: Quote:VERSION: 1.0.4 2007-09-05 Current Frequency is 100 Nand chip not recognised Checking Sim Card SIM CARD NOT EXIST ... Normally using the reset button fixed the problem, but now it won't display anything else. Reflashing the firmware doesn't help either. Does my eReader need to go back for repairs? I've only had it just over a month! (I've posted this in jinke's own forums - will let you know if I get a response there too!)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ham and potato chip sandwiches	desertgrandma	Lounge	41	07-02-2009 09:57 PM
Western Bower, B.M.: Chip of the Flying U v1 30nov 2008	mtravellerh	BBeB/LRF Books	0	11-30-2008 08:41 AM
Support libprs500, chip-in!	pilotbob	Calibre	2	11-21-2007 11:31 AM
New 3-chip platform for next-gen handhelds	Brian	Lounge	1	09-13-2005 09:55 AM
MS Longhorn OS to Store Security on a Chip	Bob Russell	Lounge	2	04-26-2005 11:19 AM

07-02-2008, 11:11 AM	#2
dottedmag OpenInkpot co-founder Posts: 407 Karma: 845 Join Date: Dec 2007 Device: Kindle Oasis	Yes, looks like a hardware problem.

07-03-2008, 05:52 PM	#3
sweetcream Member Posts: 18 Karma: 10 Join Date: Jan 2008 Device: Hanlin V3	That has never happened to me either. It definately sounds like hardware defect.

07-03-2008, 10:48 PM	#4
Crisby Fanatic Posts: 36 Karma: 357 Join Date: Apr 2008 Location: Australia Device: none	I haven't seen this error before either. You can access your sim card if you remove the battery cover and battery. I suggest you remove and replace the sim card to check its seated correctly.

07-05-2008, 09:50 AM	#5
dottedmag OpenInkpot co-founder Posts: 407 Karma: 845 Join Date: Dec 2007 Device: Kindle Oasis	THE problem is here: "Nand chip not recognised" SIM cards are not installed by default in V3 readers.

07-15-2008, 01:07 PM	#7
dottedmag OpenInkpot co-founder Posts: 407 Karma: 845 Join Date: Dec 2007 Device: Kindle Oasis	And I've got lBook V3 (the same hardware as Hanlin) without sim card at all. I suppose your will function just fine without it.

07-15-2008, 01:11 PM	#8
iterati Zealot Posts: 100 Karma: 170 Join Date: May 2008 Location: Greece Device: Hanlin V3, RCA REB1100, iPaq 214	I suspect that SIM is there for DRM support. Either way, you don't need it.

07-15-2008, 10:55 PM	#9
Crisby Fanatic Posts: 36 Karma: 357 Join Date: Apr 2008 Location: Australia Device: none	Interesting that lBooks don't come with sim cards installed. I think you're both right, dottedmag and iterati. I took the sim card out and the only difference I can see is that my HanLin started with the instructions document open in landscape view, rather than the usual contentlister menu. I don't have any DRM books on my HanLin, though.

Advert

Advert