10-30-2013, 01:07 AM | #1 |
Junior Member
Posts: 5
Karma: 10
Join Date: Oct 2013
Device: Onyx Boox M92
|
M92 - randomly powers up
I have issue when my device randomly powers up and after some time goes to sleep. I noticed it once I had the device on the desk to power up a minute after it went sleep. Today and yesterday I left device suspended for whole time and noticed that it at least once per day waked up.
I'm not pleased with that at all, it could drain the battery plus my case is not 100% protecting button, the cover is pressing on the button when the cover is pushed so if it's in back pack it could do anything. It's like leaving your phone unlocked in your pocket leaving it call international numbers etc.... Can't find anything on google or this forums that somebody else had this issue, do you guys have any suggestions what I could do? Device has the up to date firmware from my vendor ereader-store.de. |
10-30-2013, 03:06 AM | #2 |
Junior Member
Posts: 4
Karma: 14
Join Date: Sep 2013
Location: Greece
Device: ONYX BOOX M92
|
I can confirm that this random behaviour has also happened a couple of times to my M92. I have my unit for 7 months now and I have seen this turn-on / standby during the first 2 months. In both cases I had an open pdf in the "new PDF reader" and my power management settings were "10 min to standby".
I have a theory but I cannot test it easily due to the random nature of the event: I think that if the device detects a change to the battery level (it needs to display a lower battery level: minus one line in the indicator) it wakes up and then, according to your power management settings, goes to sleep again. This has also happened once to my wife's new i62 Firefly (1 month old) so, I guess, it must be a software issue. |
Advert | |
|
10-30-2013, 11:05 AM | #3 |
Junior Member
Posts: 5
Karma: 10
Join Date: Oct 2013
Device: Onyx Boox M92
|
Thank you.
I can confirm, 99% of things I read are PDF. And 10 min timer, device is about 5-6 months old. Maybe I try close the PDF and leave it in menu if it gets better. But not sure if it's the -1 battery icon. Because once it was powering and suspending every couple minutes. When you mention PDF, when I shutdown it when something is opened it get tricky as well. Sometimes even the shutdown image is not displayed properly and the last screen of the reader is there instead (that even would be welcome for suspend where instead screen saver would be the same document but on the bottom written "screensaver" so you will recognize that is asleep, but still can have the same page displayed for hours, there is a plugin for it, but still it's not the same). On one hand the device has such potential and on another hand it has so many quirks what annoy and demotivate. For example before I got device I was dreaming that I will read all mine RSS from it, now I don't even try because I'm tired of resetting and stuff and I'm just happy when I can read my PDFs. Ok I will try to close the documents and then suspend. I think it will take maybe about month to report if that helped or not. Any other advice what I should try in meantime? |
10-30-2013, 12:07 PM | #4 |
Wizard
Posts: 1,138
Karma: 1577094
Join Date: Oct 2008
Device: Samsung EB60, Onyx M92, Onyx Max2
|
I haven't a shutdown picture, but I have a blank page. Sometimes the black page is not displayed and it's a part of the main menu, or the SD-card's menu which is displayed. Each time, it's because I've closed the cover just after pushed the power button. It's the cover which play with the joystick.
|
10-30-2013, 10:35 PM | #5 | |
Junior Member
Posts: 5
Karma: 10
Join Date: Oct 2013
Device: Onyx Boox M92
|
Quote:
Strange feelings, it's one of the kind device and I'm glad it's here, but many things looks like are not production model quality. The cover, told my self that having genuine cover will be the best because with it I will have no issues (something covering something, not fitting something or damaging it). But really I wasn't happy, the materials are no cheap, but for the inside I had to get liner to clean all fuzz from it, the cover is pressing buttons, hated to see the joystick suffering. Everybody will tell it's grand and after 2 years when the contacts will be worn out nobody to blame. So I glued 2 pieces of fun foam next by the button on the cover part, so now the button is pressed just when I push on the cover hard. But normally it leaves like 0.5mm gap for the button and now I have better feeling from the cover. But that experience shouldn't be from genuine cover. The jack doesn't take all jacks, everything looks like needs tweaking to be somewhat usable. I have feeling that lots of the potential is lost due some twirks around the device. And demotivated me in many scenarios. I have Nokia phone from 2005, it's falling apart but I know I can trust it with alarm to wake me up and I can be dependand on it. If this device would had that option I would be afraid to use it, what if it will reset the time, fail to wake up, wake up early and losses all battery till morning comes, or something else. It has many many problems. I love the device, but it's unfortunate. PS: Why are mine post so big? I mean the gap under it. Now when I edited it, it disappeared. |
|
Advert | |
|
10-31-2013, 12:49 PM | #6 |
Mono
Posts: 699
Karma: 13333
Join Date: Jan 2012
Device: Boox M92
|
Random power-on also happens to my M92. It is almost 2 years old unit. I have older firmware from cca spring 2013.
I could try to measure how frequently it happens. The method would be to count number of screensavers displayed over the time. Every standby-on cycle is one screensaver picture, pictures change sequentialy, so it should not be a problém to find out how many power cycles occured in given period. |
11-01-2013, 11:49 AM | #7 |
Junior Member
Posts: 5
Karma: 10
Join Date: Oct 2013
Device: Onyx Boox M92
|
This is not bad idea at all. If this has no solution and cause is unknown that actually could help closer to the reason why this is happening. But it would require more people to participate and maybe monitor more about their device, like what settings you are have, or what was running when suspend. I think I closed the PDF reader yesterday and no I'm not sure, but I think no power up. Sorry I'm not clear, because I'm busy and tired and I'm not sure if I did it day ago or 2 days ago and what screensaver it had etc... Maybe editing the screensaver and giving them small numbers on bottom to note exactly what number you have.
|
01-15-2014, 08:00 AM | #8 |
мокрец
Posts: 52
Karma: 28
Join Date: Jan 2007
Location: Israel
Device: palm, iliad
|
Did you try to see with wireshark if any IP traffic is emitted when these power-ups happen?
|
Tags |
m92, wake up |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PRS-650 Standby slider only powers off now? | Amalthia | Sony Reader | 35 | 09-03-2012 05:52 PM |
i62 does not powers on after standby | rfog | Onyx Boox | 3 | 06-26-2012 10:41 AM |
Boox M92. Spring Bargains. The price of M92 stays reduced for 14 days :) | Booxtor | Onyx Boox | 5 | 03-02-2012 05:16 AM |
Kobo powers on while in sleep mode | gswilliams | Kobo Reader | 11 | 06-19-2011 09:43 AM |
Richard Powers - Vortrag in Berlin 16.5. | mirakix | Deutsches Forum | 7 | 05-17-2009 06:34 AM |