hard shell case for Onyx M92?

[pj123]

I need to put M92 in my backpack when going to school. To better protect the device, I would like to put it in a hard shell case or a box. Does anyone have the same problem and any success in finding a good box or case for M92? Thanks.

[iampiti]

Being a pretty obscure device I guess it's not gonna be easy to find specific covers for the M92. Have you tried generic tablet covers/cases?

[FrancoisL]

Originally Posted by pj123

I need to put M92 in my backpack when going to school. To better protect the device, I would like to put it in a hard shell case or a box. Does anyone have the same problem and any success in finding a good box or case for M92? Thanks.

I picked up a leather case for the IPAD2 with a hard shell and zippers for $20 at a discount store. It is made by Hipstreet (www.hipstreet.com) and is the Executive Leather case.

I slid my M92 in it and it fits! I had to cut off a little bit of leather to allow access to the buttons and the volume control, but the overall effect is not bad. In addition, the screen is now surrounded by a black frame, which improves the contrast of the eink screen.

[pj123]

Hi FrancoisL and iampiti, thank you for help. I am also thinking just to put the M92 in a cardboard box of the similar size. The Hipstreet case is really attractive, but I worry that if I get a Hipstreet case then the current case would become a waste.

[FrancoisL]

Originally Posted by pj123

Hi FrancoisL and iampiti, thank you for help. I am also thinking just to put the M92 in a cardboard box of the similar size. The Hipstreet case is really attractive, but I worry that if I get a Hipstreet case then the current case would become a waste.

There is nothing special about the Hipstreet case. The important thing is that the M92 is roughly the same size as a IPAD.

Go to the discount stores; check if they have a hard shell case for IPAD2 or IPAD3 on sale; try to slide your M92 in it; if it fits and if the price is low, buy it!

Good luck!

[Moinchen]

I was also looking for a hardshell case for my new m92, but I have repeatedly been disappointed.

The reason for the hardcase is that I want to be able to put the device into a backpack where it must be protected from bending, which could harm the glass screen.

First, I ordered the 'Cool Bananas Triathlon Hardcover' - but it was flexible. Had to send it back.
Then, after speaking to a seller and being assured that this was what I was looking for, I ordered the 'Cool Bananans BulletProof Hardcase'. And again - it was flexible...
So now I'm going to give that back, too.

Has anyone come up with a solution for this problem?
I'm already thinking of finding a bread-case (made of plastic for transport of lunch to work) and stuffing it with some soft cloth or foam... But is there anything that has the necessary measurements?

(Why don't you sell something like that, booxtor...? Could be profitable )

Edit: If you have an idea where to get something like that in Germany, that would be very welcome!

[Lespaul]

perhaps shapeways is an option? but not that cheap with the dimensions

[Booxtor]

I guess those ipad hardcases could do their protective jobs while transporting in a backpack very well. But the price is not the lowest though

[Maurice13]

Originally Posted by FrancoisL

Go to the discount stores; check if they have a hard shell case for IPAD2 or IPAD3 on sale; try to slide your M92 in it; if it fits and if the price is low, buy it!

Good luck!

Do that or you can also buy a Boox branded accessories (including high quality covers) on www.onyx-boox.com/store
Here how the M92 cover Passion looks with a device inside. There is also a place for the stylus.

[mr_mahermahey]

None of the covers described there have enough info in my opinion, especially whether they might guard against flex. What is the backing material in the leather/whatever? You should up the word count a bit, byte's are cheap Neither does the hipstreet one listed earlier though, what is 'hardshell' really? xx mil plastic? cardboard? aluminum? Will it guard against flex?

Don't mean to be particularly critical of your site, have been internet shopping this week and almost every site listing covers is just so vague... I'm afraid i'll actually have to go shopping in person. The horror!

About booxters' comment on price, I haven't seen a cover as expensive as a screen, don't think that should be a factor for those who know they're hard on electronics. Unfortunately we're probably a small set of people.

[FDD]

Originally Posted by mr_mahermahey

[...] I haven't seen a cover as expensive as a screen, don't think that should be a factor for those who know they're hard on electronics. Unfortunately we're probably a small set of people.

I'd buy a real hard shell (e.g. aluminum or steel) right away if only I were sure it fit good both when opened and when closed.

[Moinchen]

Thanks for all your answers. I found exactly two different real HARD shell cases for ipad, one of which is the one proposed by booxtor - and I forgot the name of the other one. Both were too expensive in my eyes for what they can do. In essence, they are just aluminum cases (like those you use for cookies or tools) stuffed with some sort of foam.

I decided to try and build one myself. I already bought a really sturdy book (for 1 Euro) and emptied the contents (was about the Disney movie "High school musical"...).

For the padding, I got two cushions filled with a block of foam (2 Euros each) and cut the foam so it will fit the ereader with its case (from booxtor's shop).

Now I'm waiting for the decoration to arrive from ebay before I can go on. I want to wrap it in sticky foil in leather design (5 Euros including postage). This must be done before I go on working on the interior. I plan to cover the foam in fabric.

If someone is interested, I can post photos of the progress once I'm done.

This self-made hardcase will look like a big book, be quite cheap, water-repellant on the outside and sturdy enough to survive in a travel bag. I believe it will be too big for the usual backpack - but that's not such a problem for me.

[mr_mahermahey]

I like pictures of DIY stuff, I've been thinking about a DIY solution. Hadn't realized booxtor was posting a link, those are close to what I'm looking for. If they didn't have the clips and/or excess space at the end and extra thickness for a paper pad.