11-12-2011, 03:40 PM | #31 | |
Junior Member
Posts: 5
Karma: 10
Join Date: Nov 2011
Device: Entourage Pocket Edge, Kindle
|
Calibration target on reader??
Quote:
The PE I set up for our daughter is up and running Ermine 0.9 without a problem as far as I can see. I am now setting up the other PE and have updated to Ermine 0.9 from Dingo 1.6, I thought without a problem, until the calibration target appeared on the reader - this was after the system had been up only about a minute or two - long enough to turn off automatic updates. This would not go away until I pressed the "switch documents" button a few times. I then tried to calibrate the display from the settings menu and no luck. I also tried to open a book, with no luck. My next step was to down grade to Dingo 1.6 which worked flawlessly - as far as I could tell. The reader worked, the display worked, etc. I then upgraded to Ermine 0.9 - again and the same thing happened. My next thought was to install the user modded update, but I thought I would place this post prior to that, as I don't want to turn the PE into a brick. I forgot to mention that in neither of the Ermine installations was I able to calibrate the touch screen. Any suggestions you might have will be most appreciated. Thanks in advance Last edited by FSD08; 11-12-2011 at 03:43 PM. |
|
11-13-2011, 06:23 PM | #32 | |
Junior Member
Posts: 5
Karma: 10
Join Date: Nov 2011
Device: Entourage Pocket Edge, Kindle
|
Quote:
|
|
11-18-2011, 01:17 AM | #33 |
Junior Member
Posts: 3
Karma: 10
Join Date: Nov 2011
Device: Entourage Pocket Edge
|
hello, i am need help o_o
I want upgrade my PE for Ermine, but I dont obtaining to make the update, I to follow all the steps, but I did not understand what it gave wrong. I do not know what he gave wrong I arrived until entering in safe mode in some attempts o.O it forgives my errors of English =P i'dont speaking very well o_o Last edited by rnk; 11-18-2011 at 01:28 AM. |
11-18-2011, 01:51 AM | #34 |
Armed with a smile :)
Posts: 1,421
Karma: 2463560
Join Date: Sep 2009
Location: California, USA
Device: enTourage eDGe & Pocket eDGe, Samsung Galaxy Note II
|
Welcome, rnk!
What is your PE doing? What does the LCD screen show? (Do you know about sliding the lock icon to the right to unlock the screen in Ermine?) Good luck! |
11-18-2011, 02:00 AM | #35 |
Armed with a smile :)
Posts: 1,421
Karma: 2463560
Join Date: Sep 2009
Location: California, USA
Device: enTourage eDGe & Pocket eDGe, Samsung Galaxy Note II
|
FSD08, did you see the post by Fuego (https://www.mobileread.com/forums/sho...d.php?t=157507) with a PE for sale?
Glad you got yours working! |
11-18-2011, 08:53 AM | #36 | |
Junior Member
Posts: 3
Karma: 10
Join Date: Nov 2011
Device: Entourage Pocket Edge
|
Quote:
it does not enter in the screen of update =/ I already have ermine in sd, I hold the button menu + rotate for right -> LCD side of device, and press power with other hand ... o_o I waiting, and the next screen have it has written ( WELCOME to your pocket eDGe ) and dont upgrade I already also tried to pressure in the four points of the screen to jump the register and I restart the PE and I try again, but when I make this it goes direct for initial screen and also it does not appear the screen of update. |
|
11-18-2011, 09:36 AM | #37 |
Guru
Posts: 733
Karma: 443
Join Date: May 2011
Location: UK
Device: Pocket Edgex2(1unborked), Alex, Nook B&W, Nook Color, Nook STR
|
suggest serial route see my post. you may have bad blocks.
|
11-18-2011, 09:55 AM | #38 |
Junior Member
Posts: 3
Karma: 10
Join Date: Nov 2011
Device: Entourage Pocket Edge
|
bad blocks ?
I bought recently and still he is in the guarantee, sera that the assistance adjusts? I am new in the subject, I am learning still. but it only this not making update, this functioning normally o.O |
11-18-2011, 04:26 PM | #39 | |
Wizard
Posts: 1,041
Karma: 4694121
Join Date: Apr 2011
Location: Virginia
Device: Pocket Edge X 2 , Edge, gTab, Kindle Fire, Nextbook 7S
|
Quote:
Try going to my Resource Sticky and download another copy of the Update along with the Official Instructions from Entourage which are included at the bottom of the post in PDF format. https://www.mobileread.com/forums/sho...d.php?t=132878 |
|
12-22-2011, 07:13 AM | #40 |
Guru
Posts: 733
Karma: 443
Join Date: May 2011
Location: UK
Device: Pocket Edgex2(1unborked), Alex, Nook B&W, Nook Color, Nook STR
|
or just use Pablob rc3 file which contains the latest update inc. working market.
|
11-19-2013, 06:51 PM | #41 |
Junior Member
Posts: 1
Karma: 10
Join Date: Nov 2013
Device: Pocket Edge
|
We are having a problem getting the pocket edge to go to the update screen you are talking about. Any idea how to make it work.. We held the buttons for more then 2 mins and nothing is coming up.
|
11-20-2013, 10:20 AM | #42 |
Guru
Posts: 858
Karma: 1027478
Join Date: Aug 2010
Location: South of France
Device: kindle dx; eDGe
|
Have you checked the usual problems?
Checked that you have named the update to update.zip and not update.zip.zip. If you are using the allmine update, have you extracted the actual update.zip from the zip archive? Have you tried to use another USB stick? And so on. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pocket eDGe w/ Ermine boots up with completely white screen | fmcmichael06 | enTourage eDGe | 10 | 03-12-2012 06:39 PM |
update pocket edge to ermine | bmkoknl | enTourage eDGe | 11 | 12-22-2011 07:16 AM |
Pocket eDGe auto-updated, but running ermine | tekknogenius | enTourage eDGe | 6 | 08-31-2011 03:43 PM |
Camera on Pocket Edge & Ermine | Qwill | enTourage eDGe | 5 | 06-03-2011 07:40 PM |
Development How to Upgrade the Pocket Edge from Dingo to Ermine | obsessed2 | enTourage Archive | 36 | 05-18-2011 09:29 AM |