|02-20-2011, 07:14 PM||#1|
Join Date: Jul 2010
Device: Amazon Kindle 3
Kindle 3 Diagnostics (interesting)
I'm sure many of you know about this already, but you can play with the Kindle diagnostics (the tests factory operators run before delivering the kindle to you) by creating a empty text file "ENABLE_DIAGS" on the Kindle USB root. Then after restarting the kindle, you will see the diagnostics menu. (NOTE: I don't know if this will damage your device or void your warranty or anything, do it at your own risk!).
Some interesting things I've noticed:
-You can set the device serial number, MAC address, and manufacturer code. However, I don't know what the side effects are, so I haven't tried it
-You can see advanced battery information such as voltage, current draw, temperature and more.
-You can stress test the kindle and see how long the battery will last on various conditions (wifi on, audio on, etc)
-Some lab126 employee wrote this interesting short story to test the TTS feature.
|06-27-2012, 09:22 AM||#2|
Join Date: Feb 2012
Device: Too many.
Rechecked on a K3 with v3.2.1 firmware.
Doesn't seem much use for anything other than hardware diagnostics. Unless you need to change your MAC address, PCB serial number, etc, etc.
I did not try the MoviNand entry because I did not know if it would be a destructive test. Will leave that one for someone else.
Note 1: It might be of use with K3's that have battery problems (or low charge) -
The battery management reporting shows the machine is in a 500ma recharge mode with an external power supply connected.
Note 2: There might be situations where this diags mode could export the user storage file system when the normal mode could not.
?? Hmm... How to make use of that? You need to put ENABLE_DIAGS on the exported file system to enter the hardware diagnostics. Still there might be some use for this.
Last edited by knc1; 06-28-2012 at 08:44 AM.
|02-19-2013, 01:15 AM||#3|
Join Date: Feb 2013
Device: Kindle 2
Works with Kindle 2
Tested and confirmed to work with Kindle 2.
Firmware: Kindle 2.5.8 (555370010)
Create an empty file named ENABLE_DIAGS in the root folder of the mounted Kindle volume. Unplug the Kindle and give it a full power cycle (reboot).
It should not have a ".txt" extension, so if you are using Windows make sure that you uncheck Hide Known Extensions in your folder options settings.
P.S. MoviNand tests are non-destructive. They just verify the filesystem.
MoviNand RootFS Verification ---------------------------- FAILURE The rootfs failed md5sum verification beause the following file had a bad md5sum: /usr/lib/tts/speech/components/voicefont/vf_tom_fu ... FS Version : 010-TNM0.9-055537 Build Date : Thu Jan 13 18:17:49 PST 2011 Press X to continue ...
Last edited by raccoon; 02-19-2013 at 01:21 AM.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Exiting Diagnostics Mode problem [K4NT]||ryuji35||Kindle Developer's Corner||20||04-09-2012 10:14 PM|
|Interesting review of the Kindle 3||OakIris||Amazon Kindle||8||11-09-2010 12:04 PM|
|Kindle Diagnostics Mode||felixix||Kindle Developer's Corner||1||10-01-2010 04:24 PM|
|Power Mode option in diagnostics menu?||scarab1||Ectaco jetBook||0||02-28-2010 10:59 PM|
|Interesting information I found out about the Kindle.||GatorDeb||Amazon Kindle||6||10-14-2008 09:07 PM|