|08-12-2010, 07:09 AM||#1|
Join Date: Nov 2007
Location: London, United Kingdom
Device: Sony T1, Sony PRS-505, Elonex (EB600E), Cool-er (EB600EM), Hanvon N516
EB600: Not even a green light. Is it dead?
Currently my Elonex 600EB reader seems dead: No green light when pushing ON button, reset does not work either. It charges (red light), but I think it's just hardware. I assume software/firmware is messed-up.
Couple weeks ago I bought Elonex 600EB reader with faulty firmware. I've manage to update it with Cool-er firmware. It was working fine and all, but it was not enough for me - wanted to try something else. Found out that it's almost the same as Foxit eSlick reader, and my Elonex can go to some "SEC S3C24X0A SMDK B/D" mode. I went on to try eSlick firmware with their updater. First phase was successful. Or I thought so. After that my Elonex reader seems dead.
Could any one explain a bit about the update process? Did it messed up bootloader?
Is there any way to revive it? Serial cable (or boot loader is needed for that as well)? Any ideas?
|08-12-2010, 08:58 AM||#2|
Join Date: Nov 2009
Device: ipaq 5550+opie
This looks like update process erase bootloader.
first step - u should putup serial cable and look what happenned with bootloader.
after, when u didnt see anything at serial, u should make a JTAG cable and upload new bootloader.
after then u should upload all part of firmware via serial cable..
thats in few words what u should do.. good luck
|08-13-2010, 07:14 PM||#3|
Join Date: Jul 2010
Device: Cybook Gen3
As you found, I have reloaded my Cybook Gen3, which is also based on the Netronix EB100 I think. I'm not sure if the operating system is the same, but you can try my path to see if it helps. THere is a serial port, but it is at 3.3 volts. You will need a 3.3V to RS-232 level translator. THis is a single chip and you can usually buy a little board with one one it. It is powered from the ebook board. With that, you can look at the bootloader stuff, and maybe find out what is wrong. I didn't try the JTAG port yet. THe pinout for both these connectors can be found on the Bookeen forums.
|08-19-2010, 03:42 AM||#4|
a pthread?? where? where?
Join Date: Mar 2009
Location: Somewhere in EU
Device: Newton MessagePad 2100, and only this
EB100 is really different from EB600.
Domas: you definitly brick your device. Playing with firmware of other brands are generally NOT a good idea, unless you work for this brand (or another one).
I think that you will find no one here that could help about this problem, and even if you got JTAG or anything like this on the device you will not be able to repair the product without very good knowledge of it.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|frozen? green light blinking||tesshan||Interead COOL-ER||10||10-10-2010 07:52 AM|
|Gen3 HELP green light doesn't go off||JanG||Bookeen||7||09-05-2010 05:24 AM|
|Battery charge light not going green?||lizlee4||Astak EZReader||3||08-15-2010 07:16 PM|
|Other Fiction Douglas, Lloyd C: Green Light V 1, 11 Mar 2010||weatherwax||ePub Books||0||03-11-2010 02:55 PM|
|iPhone AT&T Gives Green Light to Sling TV Over 3G||kjk||Apple Devices||1||02-05-2010 11:14 AM|