Quote:
Originally Posted by geekmaster
To start SSH, you need to do diags menu options N U Z X. The X is important. The SSH server takes about 20 seconds AFTER you exit from the USBnet menu before you can SSH in. You need to set your host PC usb network IP address to 192.168.15.201. You need to ssh to root@192.168.15.244. The login is root, password mario.
The "connection refused" means that you did not start SSH or you did not wait long enough for it to start, or you are trying to SSH from or to the wrong IP address.
|
Right,but the
had two mmcblk0p2.img
the mmcblk0p2.img ,ssh tip that connection refused
but the mmcblk0p2_ssh.img.gz can root@192.168.15.244
i am sure the network IP address is 192.168.15.201
that "ssh" i mean is in diags mode and select menu items N) U) Z) X). then pc request
but this maybe not important, now i still see the screen shows "Repair Needed ! Your Kindle Needs Repair...."Can i use "JB_RUNME.sh"：
Quote:
echo 0 > /var/local/upstart/lab126_gui.restarts
dd if=/mnt/us/mmcblk0p1.img of=/dev/mmcblk0p1 bs=4K
|
to fix it???
now i try the ssh again,this time the /mnt/us/ is mount
now i use
Quote:
|
dd if=/mnt/us/mmcblk0p1.img of=/dev/mmcblk0p1 bs=4K
|
to setup