MobileRead Forums - View Single Post - Noob's guide to debricking through ATK :D

Maslan · 11-13-2012, 08:22 AM

I flashed by ATK:
bootloader 3.3 (from 0x0)
kernel+jb+key 3.4 (from 0x00041000)
rootfs+jb+key 3.4 (from 003C1000)
(Nothing is so pleasing like drain battery after two hours of work. Finally I bought wall charger).
Kindle has started after I manually copied 'netusb'. The installation didn't work without it. After that I set through PUTTY 'idme' S/N, MAC, etc.
Although Kindle claimed "The device does not have WiFi" after pressing SETUP ALT+U+Q+Q until I found:
https://www.mobileread.com/forums/sho...ght=mac+adress
I wouldn't probably think of removal of 'wifid.conf' without this howto

Thanks to 'kaneorotar' and all of you.

btw I still don't know what will do bootloader-3.3 and the rest from 3.4 after another upgrade of FW if there was any.

11-13-2012, 08:22 AM	#386
Maslan Junior Member Posts: 2 Karma: 10 Join Date: Nov 2012 Location: Czech Device: K3	It didn't die - it's alive I flashed by ATK: bootloader 3.3 (from 0x0) kernel+jb+key 3.4 (from 0x00041000) rootfs+jb+key 3.4 (from 003C1000) (Nothing is so pleasing like drain battery after two hours of work. Finally I bought wall charger). Kindle has started after I manually copied 'netusb'. The installation didn't work without it. After that I set through PUTTY 'idme' S/N, MAC, etc. Although Kindle claimed "The device does not have WiFi" after pressing SETUP ALT+U+Q+Q until I found: https://www.mobileread.com/forums/sho...ght=mac+adress I wouldn't probably think of removal of 'wifid.conf' without this howto Thanks to 'kaneorotar' and all of you. btw I still don't know what will do bootloader-3.3 and the rest from 3.4 after another upgrade of FW if there was any.