[adbosch]

Here it is (I'm running FW 15.2, thanks for help on installing it):

[name=Pocket302]
[btpin=1234]
[enabled=2]
trying connection “Thuis”
connection type: wifi
[wifi.1.essid=Sitecom54BE7C]
[wifi.1.baudrate=115200]
[wifi.1.channel=1]
[wifi.1.security=3]
[wifi.1.key=*****]
[wifi.1.cacert=@cert_none]
[wifi.1.idle=5]
[wifi.1.network.ipconfig=0]
[wifi.1.network.ip=192.168.0.1]
[wifi.1.network.mask=255.255.255.0]
[wifi.1.network.gateway=24.132.37.1]
[wifi.1.network.dns1=213.46.228.196]
[wifi.1.network.dns2=62.179.104.196]
/sbin/insmod /lib/modules/wireless/gspi.ko
/sbin/insmod /lib/modules/wireless/gspi8xxx.ko helper_
name=/lib/firmware/helper_gspi.bin fw_name=/lib/firmware/
gspi8686.bin
/sbin/ifconfig eth0 up
/sbin/iwconfig eth0 nickname “Pocket302”
/sbin/wpa_supplicant -Dwext -ieth0 -c/var/etc/wpa_
supplicant.conf -B
ioctl[SIOCSIWPMKSA]: Invalid argument
ioctl[SIOCSIWPMKSA]: Invalid argument
/sbin/iwconfig eth0 essid “Sitecom54BE7C”
/sbin/udhcpc -n
udhcpc (v1.12.2) started
Sending discover...
Sending discover...
Sending discover...
No lease, failing
/bin/killall wpa_supplicant

Hope you can help. When I try to connect the device regularly freezes. (Freezing means that nothing gets it out of freezing, not even the reset hole in the back, which only works when not frozen; only solution being apparently to attach it to the PC with the USB-cable, which seems to force the reset when frozen).