Quote:
Originally Posted by brianinmaine
so I want to apt-get my debian.ext3 image file in Debian Linux (HostPC).
I followed: https://wiki.mobileread.com/wiki/Inte...Kindle_via_USB
Setup on Host PC Add the following to /etc/network/interfaces
iface usb0 inet static
address 192.168.15.201
netmask 255.255.255.0
- - -
Setup in Kindle
echo "nameserver 4.2.2.1" > /etc/resolv.conf
route add default gw 192.168.15.201
- - -
I added "iface eth0 inet dhcp" to the interfaces file and restarted the network service.
- - -
edit: pinging from the host to the internet shows my usb0 ip is the one trying to reach the internet, not my eth0?
|
Because that is what you told your routing table to do, read above quote again.
Either change your routing instructions in the routing table or specify the device to use to reach the default gateway.