Quote:
Originally Posted by geekmaster
How did the service center try to repair it? If they damaged the diagnostic partition, you need to use MfgTool to go to fastboot mode, and then use fastboot to flash a new diagnostics partition (with SSH). Then you can use that to repair the kindle. Just do what the simple debricking thread says to do.
Start USB downloader mode with "magic key".
Start fastboot mode with MfgTool.
Flash diags partition and diags kernel with fastboot.
Flash main kernel with fastboot.
Boot to diags.
Flash main partition using diags SSH "dd" command.
Erase mmcblk0p3 using diags SSH "dd" command.
Set main boot mode with idme command.
reboot.
It should work. It worked for many people. See the "success reports" list in the "simple debricking" thread.
Details for above steps are provided in the "small debricking guide for noobs". Find in in master index/tools index. It is a PDF file...
|
Other than the diags partition,
do you need a main kernel in "kernel" or a diags kernel in "diags_kernel" or both to be able to go into diags mode?