MobileRead Forums - View Single Post

jtag · 10-23-2007, 05:02 PM

Attached are two images of the relevant pinouts for JTAG and the console UART. The console UART pins are only available on the front and is configured at 115200 baud.

Console output:

iRex Technologies Sexy Program Loader for ER0100 series e-reader
(c) 2005, 2006 by iRex Technologies BV
TFFS Volume info unit size: 65536kByte
Reading SysSet info...Done
Hardware: 0003
VCOM: 2F4C
Source drivers: 0012
Initialising DELTA...Done
Uploading splash screen...Done
Initialising keys...Done
Loading kernel image...Done
Loading initrd...Done
Jumping to kernel...

Uncompressing Linux............................................ done, booting the kernel.
Linux version 2.4.19-rmk7-pxa2-irex1 (buildmgr@buildserver) () #21100 Mon Sep 24 12:21:09 CEST 2007
CPU: XScale-PXA255 revision 6
Machine: iRex Technologies ER0100 eReader
Ignoring unrecognised tag 0x00000000
Memory clock: 99.53MHz (*27)
Run Mode clock: 398.13MHz (*4)
Turbo Mode clock: 398.13MHz (*1.0, active)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/ram rw initrd=0xA1000000,4M rootfstype=ext2 init=/linuxrc rw console=ttyS2,115200 mem=64M
Console: colour dummy device 80x30
Calibrating delay loop... 397.31 BogoMIPS
Memory: 64MB = 64MB total
Memory: 59212KB available (1132K code, 275K data, 72K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Using PXA255 frequency points.
Registering CPU frequency change support.
CPU clock: 398.131 MHz (33.000-400.000 MHz)
Starting kswapd
I2C: PXA algorithm module loaded.
enable_irq(11) unbalanced from c0085a84
I2C: Adding PXA-I2C-Adapter.
I2C: Scanning bus (51)
I2C: Successfully added bus
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0x0000 (irq = 15) is a PXA UART
ttyS01 at 0x0000 (irq = 14) is a PXA UART
ttyS02 at 0x0000 (irq = 13) is a PXA UART
SA1100 Real Time Clock driver v1.00
PCF8563: RTC Initialization Successfull
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
ac97_codec: AC97 Audio codec, id: 0x5053:0x4304 (Philips UCB1400)
UCB1x00: probed IRQ55 correctly. Please remove machine dependencies from ucb1x00-core.c
Turning on amplifier
enable_irq(55) unbalanced from c00a5888
Linux Kernel Card Services 3.1.22
options: [pm]
Intel PXA250/210 PCMCIA (CS release 3.1.22)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
irex_er0100_pcmcia_configure_socket: Resetting WLAN
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 4096K
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 72K
----------------------------------------
Starting initrd
----------------------------------------
Starting tffs filesystem
Using /lib/modules/tffs.o
Warning: loading tffs will taint the kernel: non-GPL license - Proprietary
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
tffs: TrueFFS driver 7100.76
tffs: will not use IRQ<7>tffs: TffsMapMem: request_mem_region(0,20000) OK
tffs: G3/P3 found<6>tffs: Socket 0 in addr 0x0
tffs: Device 0x0: size 0xe620000 HW sector 0x200 (recommended 0x1000)
tffs: mDOC H3 not found; multi-sector polled I/O disabled<6>tffs: use major device number 100
Partition check:
tffsa: tffsa1 tffsa3 < tffsa5 tffsa6 tffsa7 >
tffs: disk partition: dev_number=0x6401, 149084 sectors, start_sector=52
tffs: disk partition: dev_number=0x6403, 2 sectors, start_sector=149136
tffs: disk partition: dev_number=0x6405, 57980 sectors, start_sector=149188
tffs: disk partition: dev_number=0x6406, 262652 sectors, start_sector=207220
tffs: disk partition: dev_number=0x6407, 1196 sectors, start_sector=469924

Loading sysset and keystore modules
Using /lib/modules/sysset.o
Warning: loading sysset will taint the kernel: non-GPL license -iRex sysset module loaded.
PROPRIETARY (c) 2006 iRex Technologies BV
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /lib/modules/keystore.o
Warning: loading keystore will taint the kernel: non-GPL license - PROPRIETARY (c) 2006 iRex Technologies BV
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
iRex keystore module loaded.

Starting delta ASIC with hwrev=3
Using /lib/modules/delta.o
Warning: loading delta will taint the kernel: non-GPL license - PROPRIETARY (c) 2006 iRex Technoeinkfb: Hardware version 3
logies BV
See http://www.tux.org/lkml/#export-tainted for inffbcon_setup: No support for fontwidth 8
ormation about tainted modules
fbcon_setup: type 0 (aux 0, depth 8) not supported
Console: switching to colour frame buffer device 96x64

Starting button device
Using /lib/modules/button.o
Warning: loading button will taint the kernel: non-GPL license -iRex ER0100 eReader Button Driver initialised
PROPRIETARY (c) 2006 iRex Technologies BV
See http://www.tuxKernel: Init WACOM On
.org/lkml/#export-tainted for information about tainted modules

Starting battery device
Using /lib/modules/battery.o
Warning: loading battery will taint the kernel: non-GPL license iRex ER0100 eReader Battery Gas Gauge Driver initialised
- PROPRIETARY (c) 2006 iRex Technologies BV
See http://www.tux.org/lkml/#export-tainted for information about tainted modules

Check for downloaded firmware updates [os=0,fs=0]
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
os flag not set, no os.gz; nothing to do
fs flag not set, no fs.gz; nothing to do
No updates, booting app fs...
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
INIT: version 2.86 booting
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
MSDOS FS: IO charset utf8
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... done.
INIT: Entering runlevel: 5
Starting PCMCIA services: cardmgr[250]: watching 2 sockets
done.
cardmgr[251]: socket 1: Marvell
Starting MMC services
Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/ide/ide-mod.o
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/ide/ide-disk.o
Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/ide/ide-probe-mod.o
(W)displayMgr.c:250,main() ePaper daemon (displayMgr 0.211)
(W)displayMgr.c:255,main() Display Manager is accessible to local processes only.
(W)erdmServer.c:62,initServer() Bound successfully to 127.0.0.1:50555.
cardmgr[251]: executing: 'modprobe cf8385 2>&1'
cardmgr[251]: + Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/pcmcia/cfio.o
Before calling register_pccard_driver
After calling register_pccard_driver
cardmgr[251]: + Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/pcmcia/cf8385.o
(W)eripc.c:37,erIpcInitServer() Version: 256

(W)eripc.c:76,erIpcInitServer() Bound successfully to 127.0.0.1:50071.
Kernel: WACOM Off Delay start
Entering cf_attach()
Before registering the client
irex_er0100_pcmcia_configure_socket: Resetting WLAN
BasePort1=0xf7000000, AssignedIRQ=68
Waiting for mb-applet-icon-container ...
After calling wlan_add_card function
Leaving cf_attach()
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth 8) not supported
.cardmgr[251]: executing: './network start wlan0 2>&1'
cardmgr[251]: + Default Config
cardmgr[251]: + wlan0 deepsleep:setting to on
cardmgr[251]: + Sample private network setup
.Could not init font path element /usr/lib/X11/fonts/misc, removing from list!
Could not init font path element /usr/lib/X11/fonts/100dpi, removing from list!
Could not init font path element /usr/lib/X11/fonts/75dpi, removing from list!
...(W)eripc.c:37,erIpcInitServer() Version: 256

(W)eripc.c:76,erIpcInitServer() Bound successfully to 127.0.0.1:50073.
..... wait done
Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/usb/hal.o
hal_pxa250.c: 1362-hal Initialization Success
Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/usb/phci.o
td_cache = c022f9f0
ed_cache = c022fa60
usb.c: new USB bus registered, assigned bus number 1
(W)eripc.c:37,erIpcInitServer() Version: 256

hub.c: USB hub found
hub.c: 1 port detected
(W)eripc.c:76,erIpcInitServer() Bound successfully to 127.0.0.1:50072.
USB HAL: HC suspend
usb_phci.c: usb-phci Initialization Success
Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/scsi/scsi_mod.o
SCSI subsystem driver Revision: 1.00
Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/usb/storage/usb-storage.o
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
(CL_W)main.c:217,main() gtk_rc_get_default_files [/etc/gtk-2.0/gtkrc]
(CL_W)main.c:217,main() gtk_rc_get_default_files [/home/root/.gtkrc-2.0]
$** can't synthesize pci hotplug events
AC97: Turning off sound
(W)mb-applet-icon-container.c:1184,loadIcons() Can't find pRegIcon[56]
(W)mb-applet-icon-container.c:1184,loadIcons() Can't find pRegIcon[57]
(W)eripc.c:37,erIpcInitServer() Version: 256

(W)eripc.c:76,erIpcInitServer() Bound successfully to 127.0.0.1:50065.
(CL_E)erConnect.c:68,erConnectInit() Lock the connect mutex
(CL_E)metadataStoreManager.c:936,recreateArchives( ) Can not create directory /mnt/free/newspapers!
(CL_E)metadataStoreManager.c:947,recreateArchives( ) Can not create directory /mnt/free/books!
(CL_E)metadataStoreManager.c:958,recreateArchives( ) Can not create directory /mnt/free/documents!
(CL_E)metadataStoreManager.c:969,recreateArchives( ) Can not create directory /mnt/free/notes!
(W)eripc.c:37,erIpcInitServer() Version: 256

(W)eripc.c:76,erIpcInitServer() Bound successfully to 127.0.0.1:50070.
(CL_W)programManager.c:1019,pm_InitProgramTable() Application [APABIMOBI] executable [/usr/bin/xebreader] is not found: disabled it
(CL_W)programManager.c:1019,pm_InitProgramTable() Application [EBA] executable [/usr/bin/eba] is not found: disabled it
(CL_W)programManager.c:1019,pm_InitProgramTable() Application [ARINC] executable [/usr/bin/ereader_mapviewer] is not found: disabled it
$** can't synthesize root hub events
Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/usb/pdc.o
USB HAL: DC suspend
usb_pdc.c: usb-pdc Initialization Success
Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/usb/mscd.o
pdc_bus.c: Registered Driver devmscd
devmscd.c: devmscd Initialization Success

OpenEmbedded Linux ereader ttyS2

ereader login:

10-23-2007, 05:02 PM	#6
jtag Junior Member Posts: 3 Karma: 27 Join Date: Oct 2007 Device: irex	pinouts and console output Attached are two images of the relevant pinouts for JTAG and the console UART. The console UART pins are only available on the front and is configured at 115200 baud. Console output: iRex Technologies Sexy Program Loader for ER0100 series e-reader (c) 2005, 2006 by iRex Technologies BV TFFS Volume info unit size: 65536kByte Reading SysSet info...Done Hardware: 0003 VCOM: 2F4C Source drivers: 0012 Initialising DELTA...Done Uploading splash screen...Done Initialising keys...Done Loading kernel image...Done Loading initrd...Done Jumping to kernel... Uncompressing Linux............................................ done, booting the kernel. Linux version 2.4.19-rmk7-pxa2-irex1 (buildmgr@buildserver) () #21100 Mon Sep 24 12:21:09 CEST 2007 CPU: XScale-PXA255 revision 6 Machine: iRex Technologies ER0100 eReader Ignoring unrecognised tag 0x00000000 Memory clock: 99.53MHz (27) Run Mode clock: 398.13MHz (4) Turbo Mode clock: 398.13MHz (1.0, active) On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/ram rw initrd=0xA1000000,4M rootfstype=ext2 init=/linuxrc rw console=ttyS2,115200 mem=64M Console: colour dummy device 80x30 Calibrating delay loop... 397.31 BogoMIPS Memory: 64MB = 64MB total Memory: 59212KB available (1132K code, 275K data, 72K init) Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) Inode cache hash table entries: 4096 (order: 3, 32768 bytes) Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Using PXA255 frequency points. Registering CPU frequency change support. CPU clock: 398.131 MHz (33.000-400.000 MHz) Starting kswapd I2C: PXA algorithm module loaded. enable_irq(11) unbalanced from c0085a84 I2C: Adding PXA-I2C-Adapter. I2C: Scanning bus (51) I2C: Successfully added bus pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with no serial options enabled ttyS00 at 0x0000 (irq = 15) is a PXA UART ttyS01 at 0x0000 (irq = 14) is a PXA UART ttyS02 at 0x0000 (irq = 13) is a PXA UART SA1100 Real Time Clock driver v1.00 PCF8563: RTC Initialization Successfull RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize ac97_codec: AC97 Audio codec, id: 0x5053:0x4304 (Philips UCB1400) UCB1x00: probed IRQ55 correctly. Please remove machine dependencies from ucb1x00-core.c Turning on amplifier enable_irq(55) unbalanced from c00a5888 Linux Kernel Card Services 3.1.22 options: [pm] Intel PXA250/210 PCMCIA (CS release 3.1.22) usb.c: registered new driver usbdevfs usb.c: registered new driver hub NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com irex_er0100_pcmcia_configure_socket: Resetting WLAN RAMDISK: Compressed image found at block 0 Freeing initrd memory: 4096K VFS: Mounted root (ext2 filesystem). Freeing init memory: 72K ---------------------------------------- Starting initrd ---------------------------------------- Starting tffs filesystem Using /lib/modules/tffs.o Warning: loading tffs will taint the kernel: non-GPL license - Proprietary See http://www.tux.org/lkml/#export-tainted for information about tainted modules tffs: TrueFFS driver 7100.76 tffs: will not use IRQ<7>tffs: TffsMapMem: request_mem_region(0,20000) OK tffs: G3/P3 found<6>tffs: Socket 0 in addr 0x0 tffs: Device 0x0: size 0xe620000 HW sector 0x200 (recommended 0x1000) tffs: mDOC H3 not found; multi-sector polled I/O disabled<6>tffs: use major device number 100 Partition check: tffsa: tffsa1 tffsa3 < tffsa5 tffsa6 tffsa7 > tffs: disk partition: dev_number=0x6401, 149084 sectors, start_sector=52 tffs: disk partition: dev_number=0x6403, 2 sectors, start_sector=149136 tffs: disk partition: dev_number=0x6405, 57980 sectors, start_sector=149188 tffs: disk partition: dev_number=0x6406, 262652 sectors, start_sector=207220 tffs: disk partition: dev_number=0x6407, 1196 sectors, start_sector=469924 Loading sysset and keystore modules Using /lib/modules/sysset.o Warning: loading sysset will taint the kernel: non-GPL license -iRex sysset module loaded. PROPRIETARY (c) 2006 iRex Technologies BV See http://www.tux.org/lkml/#export-tainted for information about tainted modules Using /lib/modules/keystore.o Warning: loading keystore will taint the kernel: non-GPL license - PROPRIETARY (c) 2006 iRex Technologies BV See http://www.tux.org/lkml/#export-tainted for information about tainted modules iRex keystore module loaded. Starting delta ASIC with hwrev=3 Using /lib/modules/delta.o Warning: loading delta will taint the kernel: non-GPL license - PROPRIETARY (c) 2006 iRex Technoeinkfb: Hardware version 3 logies BV See http://www.tux.org/lkml/#export-tainted for inffbcon_setup: No support for fontwidth 8 ormation about tainted modules fbcon_setup: type 0 (aux 0, depth 8) not supported Console: switching to colour frame buffer device 96x64 Starting button device Using /lib/modules/button.o Warning: loading button will taint the kernel: non-GPL license -iRex ER0100 eReader Button Driver initialised PROPRIETARY (c) 2006 iRex Technologies BV See http://www.tuxKernel: Init WACOM On .org/lkml/#export-tainted for information about tainted modules Starting battery device Using /lib/modules/battery.o Warning: loading battery will taint the kernel: non-GPL license iRex ER0100 eReader Battery Gas Gauge Driver initialised - PROPRIETARY (c) 2006 iRex Technologies BV See http://www.tux.org/lkml/#export-tainted for information about tainted modules Check for downloaded firmware updates [os=0,fs=0] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended os flag not set, no os.gz; nothing to do fs flag not set, no fs.gz; nothing to do No updates, booting app fs... EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended INIT: version 2.86 booting EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended MSDOS FS: IO charset utf8 EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended Setting up IP spoofing protection: rp_filter. Configuring network interfaces... done. INIT: Entering runlevel: 5 Starting PCMCIA services: cardmgr[250]: watching 2 sockets done. cardmgr[251]: socket 1: Marvell Starting MMC services Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/ide/ide-mod.o Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/ide/ide-disk.o Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/ide/ide-probe-mod.o (W)displayMgr.c:250,main() ePaper daemon (displayMgr 0.211) (W)displayMgr.c:255,main() Display Manager is accessible to local processes only. (W)erdmServer.c:62,initServer() Bound successfully to 127.0.0.1:50555. cardmgr[251]: executing: 'modprobe cf8385 2>&1' cardmgr[251]: + Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/pcmcia/cfio.o Before calling register_pccard_driver After calling register_pccard_driver cardmgr[251]: + Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/pcmcia/cf8385.o (W)eripc.c:37,erIpcInitServer() Version: 256 (W)eripc.c:76,erIpcInitServer() Bound successfully to 127.0.0.1:50071. Kernel: WACOM Off Delay start Entering cf_attach() Before registering the client irex_er0100_pcmcia_configure_socket: Resetting WLAN BasePort1=0xf7000000, AssignedIRQ=68 Waiting for mb-applet-icon-container ... After calling wlan_add_card function Leaving cf_attach() fbcon_setup: No support for fontwidth 8 fbcon_setup: type 0 (aux 0, depth 8) not supported .cardmgr[251]: executing: './network start wlan0 2>&1' cardmgr[251]: + Default Config cardmgr[251]: + wlan0 deepsleep:setting to on cardmgr[251]: + Sample private network setup .Could not init font path element /usr/lib/X11/fonts/misc, removing from list! Could not init font path element /usr/lib/X11/fonts/100dpi, removing from list! Could not init font path element /usr/lib/X11/fonts/75dpi, removing from list! ...(W)eripc.c:37,erIpcInitServer() Version: 256 (W)eripc.c:76,erIpcInitServer() Bound successfully to 127.0.0.1:50073. ..... wait done Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/usb/hal.o hal_pxa250.c: 1362-hal Initialization Success Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/usb/phci.o td_cache = c022f9f0 ed_cache = c022fa60 usb.c: new USB bus registered, assigned bus number 1 (W)eripc.c:37,erIpcInitServer() Version: 256 hub.c: USB hub found hub.c: 1 port detected (W)eripc.c:76,erIpcInitServer() Bound successfully to 127.0.0.1:50072. USB HAL: HC suspend usb_phci.c: usb-phci Initialization Success Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/scsi/scsi_mod.o SCSI subsystem driver Revision: 1.00 Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/usb/storage/usb-storage.o Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. (CL_W)main.c:217,main() gtk_rc_get_default_files [/etc/gtk-2.0/gtkrc] (CL_W)main.c:217,main() gtk_rc_get_default_files [/home/root/.gtkrc-2.0] $* can't synthesize pci hotplug events AC97: Turning off sound (W)mb-applet-icon-container.c:1184,loadIcons() Can't find pRegIcon[56] (W)mb-applet-icon-container.c:1184,loadIcons() Can't find pRegIcon[57] (W)eripc.c:37,erIpcInitServer() Version: 256 (W)eripc.c:76,erIpcInitServer() Bound successfully to 127.0.0.1:50065. (CL_E)erConnect.c:68,erConnectInit() Lock the connect mutex (CL_E)metadataStoreManager.c:936,recreateArchives( ) Can not create directory /mnt/free/newspapers! (CL_E)metadataStoreManager.c:947,recreateArchives( ) Can not create directory /mnt/free/books! (CL_E)metadataStoreManager.c:958,recreateArchives( ) Can not create directory /mnt/free/documents! (CL_E)metadataStoreManager.c:969,recreateArchives( ) Can not create directory /mnt/free/notes! (W)eripc.c:37,erIpcInitServer() Version: 256 (W)eripc.c:76,erIpcInitServer() Bound successfully to 127.0.0.1:50070. (CL_W)programManager.c:1019,pm_InitProgramTable() Application [APABIMOBI] executable [/usr/bin/xebreader] is not found: disabled it (CL_W)programManager.c:1019,pm_InitProgramTable() Application [EBA] executable [/usr/bin/eba] is not found: disabled it (CL_W)programManager.c:1019,pm_InitProgramTable() Application [ARINC] executable [/usr/bin/ereader_mapviewer] is not found: disabled it $** can't synthesize root hub events Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/usb/pdc.o USB HAL: DC suspend usb_pdc.c: usb-pdc Initialization Success Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/usb/mscd.o pdc_bus.c: Registered Driver devmscd devmscd.c: devmscd Initialization Success OpenEmbedded Linux ereader ttyS2 ereader login: Attached Thumbnails