Quote:
Originally Posted by jusmee
I think you need to download the logomaker application from Jinke.
|
@Nimblem
The logomaker Jusmee mentioned is available from the
Astak website also. There are versions for both the 5" and 6" readers. This is how to do it:
Quote:
Method of update logo
1. Prepare two pictures in bmp format, size is 600×800 pixels, one is booting logo and the other is power off interface.
2. Use LogoMaker to produce logo.bin and logo.md5.
3. Create /jinke/logo/ folders under the root index of SD card, copy logo.bin and logo.md5 to this folder.
4.Insert SD card to device
5.Enter into settings fuction, the item will be appeared, which is "Update boot and shutdown logo".
6. Press number key and press OK to update logo.
7.The device can automatically restart after successfully update.
|
If you ever want to go back to the original start up and close down screens (instead of the custom ones) this is possible by reinstalling the firmware.