Right now I'm downloading the main partition image.
I think I'll act like this:
- enter in diag mode
- go in USB mode
- drop mmcblk0p1.img from 5.0.0 firmware
- exit USB mode
- go in fastboot mode
- flash 5.0.0 kernel with
Code:
fastboot flash kernel kernel-5.0.0.img
- reboot in diag mode
- enter in USBnet mode
- copy mmcblk0p1.img with
Code:
dd if=/mnt/us/mmcblk0p1.img of=/dev/mmcblk0p1 bs=4K
- if needed, erase /var/local with
Code:
dd if=/dev/zero of=/dev/mmcblk0p3 bs=4K count=1K
- start factory reset script with
Code:
/usr/sbin/factory_reset
Is it OK?