People just going crazy. I read all the posts for 5 days, my head hurts like never, and I do not get it. Maybe this is my kindle and broken that it can not be repaired. I tried the Kubrick live cd, dvd, usb, and it is up to all right until you come to the part where you need to enter fastboot mode. It is waiting for the device, and so long as it does not stop. I tried it with "USB debricking for noobs (K4/K5): https://www.mobileread.com/forums/sho...d.php?t=180789" which was the silver. There I did forth the following:. Connect the Kindle to your computer, press the power switch, hold it until it goes out, then push the button down, windows detect a new device in the Control Panel to display as HID-compilant device. Run mfg tools, I'm going to scan that device, top right compilant detected as HID device, switch it on kindle fastboot, then start and after a few seconds it appears that it has successfully done. But then nothing else happens, I understand he should then demonstrate that it has found new hardware and ask for drivers to install. But nothing happens. Then I run the inf wizard that libusb-win32-bin-1.2.6.0, go on, get to find the list that I want to install, choose ns blank codes (so we him windows) see when you plug it in, then forward and then he install the driver. However, using Windows 7 and it ejected the driver is not installed correctly. The control panel is reported as libsub, and the name I gave him when I used the wizard, but in addition a yellow exclamation mark. Then run the cmd knock all the instructions, enter the fastboot.exe knock it fastboot flash Diags mmbkl0p2_ssh.img, is there something like start, then throw it again Waiting for device, and there is nothing else going on. Then I tried it all and the XP system, the driver is installed, but again there is that part in fastboot mode, and throw Waiting device. I do not know if I made a mistake somewhere, or maybe a defective part that can not be repaired. Otherwise the kindle 4 silver color, and it is currently an image (a rose) but does not react to anything. I tried the one mfg tools to get into diags mode, but nothing happens, any help is appreciated me. Once again the excuse of bad language. Probably you act like the Frenchman from "Alo". .
