Quote:
Originally Posted by blueclothes
triple boot:
just copy the "config" to the root of your SD card
run one of the EXE
then turn off and on.
|
First you must "root" the thing to install the firmware : this is done by copying the config directory
AND the V3update.bin file to your SD card's root,
then turning the reader off,
then turning it on by first pressing the "volume+" button,
then the "on" button.
Once this is done, you may choose to run one of the three scripts in the config directory; after rebooting the reader, you can test the mode you just chose.