Quote:
Originally Posted by Booxtor
|
I am not able to update to this update.
Tried the usual Update steps here
http://ereader-store.de/en/content/8-downloads
1. Download the firmware in zip format and copy it to an empty SD card (No need to unzip the firmware, the name of the firmware should be update-2012xxxx.zip)
2. Turn the device off. If you are not sure if the device is power off, please press “reset” button at the back side of the device
3. Insert TF card.
On M92 Press joystick OK button and hold it, then press power button.
4. When it shows “software update request detected, Checking updates” at the bottom of the screen, release OK / BACK button. It takes around 5-7 minutes to finish the updating. The device will shut down automatically after the update is completed
5. After the update is completed, please start the device and go to “about” to check the Firmware Version to make sure the update is successful.
At Step 4 I release the OK Joystick button while holding the Power button - nothing happened (light goes out)
If I Release both buttons the M92 boots the system without any information about successful update and if I check the firmware version it's still the old
Also tried to recover MFG-Tool and then updating, but without success.
https://www.mobileread.com/forums/sho...9&postcount=82
In the recovery MFG-Tool is the image of the firmware from July 2013 included. Any possibility that anyone can update this with the latest from December 2013 or can describe how to manage this?