View Single Post
Old 09-03-2012, 03:46 PM   #3
Mark Nord
2B || !2B
Mark Nord can program the VCR without an owner's manual.Mark Nord can program the VCR without an owner's manual.Mark Nord can program the VCR without an owner's manual.Mark Nord can program the VCR without an owner's manual.Mark Nord can program the VCR without an owner's manual.Mark Nord can program the VCR without an owner's manual.Mark Nord can program the VCR without an owner's manual.Mark Nord can program the VCR without an owner's manual.Mark Nord can program the VCR without an owner's manual.Mark Nord can program the VCR without an owner's manual.Mark Nord can program the VCR without an owner's manual.
 
Posts: 851
Karma: 194010
Join Date: Feb 2010
Location: Austria
Device: Sony PRS505/650/T1/tolino vision 5
Hi elemenoP,

here is the link to the readme, mentioned in the PRS+ project-page-WIKI

And here is the text:
Spoiler:
Installation:

Warning: MAKE SURE YOUR READER IS AT LEAST 75% CHARGED before starting installation!!!

1) Connect your reader to the PC
2) Double-click the setup.exe on the PC. The program will give you all necessary instructions on your PC screen.


Linux / MacOS users

You will need Windows for the first installation.
Subsequent updates could be installed by simply unpacking update.zip to internal memory and rebooting the reader.


Unfortunately updating/flashing the Sony PRS650 rely on a windows-dll.
But as EldRick wrote, this is only neccessary once. To install the PRS+ enabled base-firmware.
Mark Nord is offline   Reply With Quote