Quote:
Originally Posted by NuPogodi
Hmmm, it seems a bit strange... I was pretty sure that the framebuffer in KT has to be 608*800 ~ 480KB when yours file is much larger (2MB, after unzipping). I've nevertheless modified the source code for the simplest format - portable graymap. Although I still have some doubts whether it works properly (especially for both screen orientations), You may try it and report the results.
PS. If the attached binary fails to make proper shot, could you please run "eips -i > /mnt/us/eips.txt" (for both orientations) and copy-paste the content of eips.txt?
|
for the moment i get this here after converted ,
and about the eips.txt ;
Quote:
Fixed framebuffer info
id: mxc_epdc_fb smem_start: 0x75400000
smem_len: 2179072 type: PACKED_PIXELS
type_aux: 0 visual: STATIC_PSEUDOCOLOR
xpanstep: 1 ypanstep: 1
ywrapstep: 0 line_length: 608
mmio_start: 0x00000000 mmio_len: 0
accel: 0
Variable framebuffer info
xres: 600 yres: 800
xres_virtual: 608 yres_virtual: 3584
xoffset: 0 yoffset: 0
bits_per_pixel: 8 grayscale: 1
red.offset: 0 green.offset: 0
red.length: 8 green.length: 8
red.msb_right: 0 green.msb_right: 0
blue.offset: 0 transp.offset: 0
blue.length: 8 transp.length: 0
blue.msb_right: 0 transp.msb_right: 0
nonstd: 0 activate: 128
width: -1 height: -1
accel_flags: 0 pixclock: 32258064
left_margin: 17 right_margin: 172
upper_margin: 4 lower_margin: 18
hsync_len: 15 vsync_len: 4
sync: 0 vmode: 0
rotate: 1
|
ill send also the converted , the bz2 and pgm ive got.
PS- also , itīs good to say that iīm running these insede xterm because i couldīt get usbnetwork here yet - sic.