Thank you for new editor feature, it works very well! It's bit difficult to browse the partition, but I don't think this is a problem for the majority of people
About usbnet bug, I have also dmesg output:
Spoiler:
Linux version 2.6.35.3-850-gbc67621+ (gallen@gallen-desktop) (gcc version 4.4.4 (4.4.4_09.06.2010) ) #606 PREEMPT Mon Nov 5 14:13:06 CST 2012
CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: Freescale MX50 Reference Design Platform
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 65024
free_area_init_node: node 0, pgdat 803b6dd8, node_mem_map 803d7000
DMA zone: 192 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 24384 pages, LIFO batch:3
Normal zone: 316 pages used for memmap
Normal zone: 40132 pages, LIFO batch:7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64516
Kernel command line: console=ttymxc0,115200 rootwait rw quiet lpj=4997120 root=/dev/mmcblk0p1 rootfstype=ext4 hwcfg_p=0x7ffffe00 hwcfg_sz=110 waveform_p=0x7feec000 waveform_sz=1129647 mem=254M mx50_1GHz
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 254MB = 254MB total
Memory: 253920k/253920k available, 6176k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xf9e00000 - 0xffe00000 ( 96 MB)
vmalloc : 0x90000000 - 0xf4000000 (1600 MB)
lowmem : 0x80000000 - 0x8fe00000 ( 254 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
.init : 0x80008000 - 0x80024000 ( 112 kB)
.text : 0x80024000 - 0x8036a000 (3352 kB)
.data : 0x8037e000 - 0x803b7b20 ( 231 kB)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:368
MXC GPIO hardware
MXC IRQ initialized
MXC_Early serial console at MMIO 0x53fc0000 (options '115200')
bootconsole [ttymxc0] enabled
Console: colour dummy device 80x30
Calibrating delay loop (skipped) preset value.. 999.42 BogoMIPS (lpj=4997120)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
regulator: core version 0.5
NET: Registered protocol family 16
i.MX IRAM pool: 128 KB@0x90040000
hwcfg_size_setup() hwcfg_szie=110
***_MemoryRequest:2383: request memory region! addr=0x7ffffe00, len=110***
hwcfg_p_setup() hwcfg_p=7ffffe00,vaddr=9006ee00,size=110
hwcfg_p_setup() pcba="E606B0" !!
CPU is i.MX50 Revision 1.1
[check_hardware_name-413] PCBA ID is 14
mxc_board_init() Set E606B2 key mapping !!
Using SDMA I.API
MXC DMA API initialized
IMX usb wakeup probe
the wakeup pdata is 0x8038b520
IMX usb wakeup probe
the wakeup pdata is 0x8038b5d4
bio: create slab <bio-0> at 0
regulator: DCDC_3V15: 3150 mV
SCSI subsystem initialized
CSPI: mxc_spi-2 probed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PMIC Light driver loading...
mc13892 Rev 0.0 FinVer 0 detected
Initializing regulators for mx50 rdp.
regulator: SW1: 600 <--> 1375 mV at 600 mV
PMIC ADC start probe
PMIC Light successfully loaded
Device spi3.0 probed
Switching to clocksource mxc_timer1
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
LPMode driver module loaded
Static Power Management for Freescale i.MX5
PM driver module loaded
sdram autogating driver module loaded
busfreq_probe: failed to get lp regulator
Bus freq driver module loaded
mxc_dvfs_core_probe
DVFS driver module loaded
i.MXC CPU frequency driver
DVFS PER driver module loaded
msgmni has been set to 495
alg: No test for stdrng (krng)
cryptodev: driver loaded.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
drivers/video/mxc/mxc_epdc_fb.c(4185):EPD 1024x758
[mxc_epdc_fb_probe] memory to allocate: 3145728,num_screens=2
waveform_size_setup() wf_size=1129647
***_MemoryRequest:174: request memory region! addr=0x7feec000, len=1129647***
waveform_p_setup() wf_p=7feec000,vaddr=90200000,size=1129647
root_path_setup() rootdev=0,rootpart=1
Console: switching to colour frame buffer device 128x47
[epdc_firmware_func]:fw p=90200000,size=1129647
drivers/video/mxc/mxc_epdc_fb.c(3852):EPD 1024x758
fake_s1d13522_parse_epd_cmdline : epd cmdline parse already done .
client0 ,addr=0x68,name=tps65185-1
TPS65185 versions : major=0x1,minor=0x2,version=0x5,RevID=0x65
Serial: MXC Internal UART driver
mxcintuart.0: ttymxc0 at MMIO 0x53fc0000 (irq = 32) is a Freescale i.MX
console [ttymxc0] enabled, bootconsole disabled
mxcintuart.1: ttymxc1 at MMIO 0x53fbc000 (irq = 31) is a Freescale i.MX
mxcintuart.2: ttymxc2 at MMIO 0x5000c000 (irq = 33) is a Freescale i.MX
loop: module loaded
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[arch/arm/plat-mxc/usb_common.c-343] usbh1_set_utmi_xcvr()
fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.1: irq 14, io base 0x53f80200
fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
MXC keypad loaded
input: mxckpd as /devices/virtual/input/input0
input: zForce-ir-touch as /devices/virtual/input/input1
mc13892 rtc probe start
[zForce_ir_touch_recv_data-176] command BootComplete (0)...
pmic_rtc pmic_rtc.1: rtc core: registered pmic_rtc as rtc0
mc13892 rtc probe succeed
i2c /dev entries driver
APM Battery Driver
MXC WatchDog Driver 2.0
[msp430_probe-579] MSP430 firmware version C851
[drivers/mxc/pmic/mc13892/pmic_battery.c-991] pmic_battery_probe...
[ntx_get_battery_vol-1551] 96,bat=1010
power_supply mc13892_charger: charger status: online
[ntx_get_battery_vol-1551] 96,bat=1010
mxsdhci: MXC Secure Digital Host Controller Interface driver
mxsdhci: MXC SDHCI Controller Driver.
mmc0: SDHCI detect irq 0 irq 1 INTERNAL DMA
mxsdhci: MXC SDHCI Controller Driver.
mmc1: SDHCI detect irq 273 irq 2 INTERNAL DMA
mxsdhci: MXC SDHCI Controller Driver.
mmc2: SDHCI detect irq 0 irq 3 INTERNAL DMA
Registered led device: pmic_ledsr
Registered led device: pmic_ledsg
Registered led device: pmic_ledsb
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
[zForce_ir_touch_recv_data-193] firmware version 0000 0000 0000 0000
[ntx_get_battery_vol-1551] 96,bat=1010
[ntx_get_battery_vol-1551] 96,bat=1010
pmic_rtc pmic_rtc.1: setting system clock to 2013-04-30 07:45:02 UTC (1367307902)
Waiting for root device /dev/mmcblk0p1...
mmc0: new high speed SDHC card at address e624
mmcblk0: mmc0:e624 SU04G 3.69 GiB
mmcblk0: p1 p2 p3
EXT4-fs (mmcblk0p1): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (mmcblk0p1): recovery complete
EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:1.
Freeing init memory: 112K
EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
[ntx_get_battery_vol-1551] 96,bat=1010
[ntx_get_battery_vol-1551] 96,bat=1010
[PROGRESS_BAR-2857] No progess ...
TPS65185 temprature data = 0x16,22
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
read_alarm: 0 70/0/1 0:0:0
DVFS is started
ehci_fsl_bus_suspend, Host 1
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
usb plugged 1-0
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
[drivers/input/touchscreen/zforce_i2c.c-422] zforce_i2c_open()
[zForce_ir_touch_recv_data-145] command Activate (0) ...
[zForce_ir_touch_recv_data-154] command Resolution (0) ...
[zForce_ir_touch_recv_data-179] command Frequency (0) ...
[ntx_get_battery_vol-1551] 96,bat=1010
lit_ctl
command exec successfully!
lit_ctl
command exec successfully!
lit_ctl
command exec successfully!
lit_ctl
command exec successfully!
lit_ctl
command exec successfully!
lit_ctl
command exec successfully!
lit_ctl
command exec successfully!
lit_ctl
command exec successfully!
lit_ctl
command exec successfully!
lit_ctl
command exec successfully!
lit_ctl
command exec successfully!
lit_ctl
command exec successfully!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
[ntx_get_battery_vol-1551] 96,bat=1010
[ntx_get_battery_vol-1551] 96,bat=1010
[ntx_get_battery_vol-1551] 96,bat=1010
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
[ntx_get_battery_vol-1551] 96,bat=1010
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
ARC USBOTG Device Controller driver (1 August 2005)
Waiting arm_podf enabled!
[fsg_bind-3585] mfg = Kobo , SN = 613A311021053
g_file_storage gadget: File-backed Storage Gadget, version: 20 November 2008
g_file_storage gadget: Number of LUNs=1
g_file_storage gadget-lun0: ro=0, file: /dev/mmcblk0p3
dr_controller_run: udc out low power mode
fsl-usb2-udc: bind to driver g_file_storage
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
g_file_storage gadget: high speed config #1
[ntx_get_battery_vol-1551] 96,bat=1010
[ntx_get_battery_vol-1551] 96,bat=1010
TPS65185 temprature data = 0x18,24
[ntx_get_battery_vol-1551] 96,bat=1010
[ntx_get_battery_vol-1551] 96,bat=1010
[ntx_get_battery_vol-1551] 96,bat=1010
[ntx_get_battery_vol-1551] 96,bat=1010
[ntx_get_battery_vol-1551] 96,bat=1010
[ntx_get_battery_vol-1551] 96,bat=1010
[ntx_get_battery_vol-1551] 96,bat=1010
TPS65185 temprature data = 0x18,24
[ntx_get_battery_vol-1551] 96,bat=1010
[ntx_get_battery_vol-1551] 96,bat=1010
[ntx_get_battery_vol-1551] 96,bat=1010
[ntx_get_battery_vol-1551] 96,bat=1010
[ntx_get_battery_vol-1551] 96,bat=1010
[ntx_get_battery_vol-1551] 96,bat=1010
[ntx_get_battery_vol-1551] 96,bat=1010
TPS65185 temprature data = 0x18,24
[ntx_get_battery_vol-1551] 96,bat=1010
[ntx_get_battery_vol-1551] 96,bat=1010
[ntx_get_battery_vol-1551] 96,bat=1010
usb unplugged
power_supply mc13892_charger: charger status: online
try_wake_up_udc: udc enter low power mode
Waiting arm_podf enabled!
[ntx_get_battery_vol-1551] 96,bat=1010
[ntx_get_battery_vol-1551] 96,bat=1010
unregistered gadget driver 'g_file_storage'
ARC USBOTG Device Controller driver unregistered
Waiting arm_podf enabled!
Waiting arm_podf enabled!
[msp_int-1580] MSP430 interrupt triggered !!!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
[ntx_get_battery_vol-1551] 96,bat=1010
Waiting arm_podf enabled!
Waiting arm_podf enabled!
[ntx_get_battery_vol-1551] 100,bat=1018
[msp430_setalarm-789] alarm 360
Waiting arm_podf enabled!
[mxc_rtc_ioctl-112] Micro P MSP430 status 0x4808 ....
PM: Preparing system for mem sleep
Freezing user space processes ... freeze 1!!!!!!!!!!!!!!!!!!!!
(elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
USB Host suspend begins
ehci_fsl_drv_suspend, pm event
[sdhci_suspend-1804] skip suspend for mmc1
DVFS is stopped
PM: suspend of devices complete after 4.067 msecs
suspend wp cpu=1000000000
PM: late suspend of devices complete after 0.182 msecs
PM: early resume of devices complete after 0.120 msecs
DVFS is started
[msp_int-1580] MSP430 interrupt triggered !!!
usb plugged 1-0
power_supply mc13892_charger: charger status: online
[sdhci_resume-1847] skip resume for mmc1
ehci fsl drv resume begins: Host 1
ehci_fsl_drv_resume,pm event, wait for wakeup irq if needed
ehci_fsl_bus_resume, Host 1
[ntx_get_battery_vol-1551] 100,bat=1018
[ntx_get_battery_vol-1551] 100,bat=1018
PM: resume of devices complete after 417.125 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
[mxc_rtc_ioctl-112] Micro P MSP430 status 0x4804 ....
[ntx_get_battery_vol-1551] 100,bat=1018
read_alarm: 1 70/0/1 0:0:1
TPS65185 temprature data = 0x17,23
Waiting arm_podf enabled!
Waiting arm_podf enabled!
ehci_fsl_bus_suspend, Host 1
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
[ntx_get_battery_vol-1551] 96,bat=1010
[ntx_get_battery_vol-1551] 96,bat=1010
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
[ntx_get_battery_vol-1551] 96,bat=1010
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
[ntx_get_battery_vol-1551] 96,bat=1010
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
Waiting arm_podf enabled!
[ntx_get_battery_vol-1551] 96,bat=1010
arcotg_udc: disagrees about version of symbol module_layout
Waiting arm_podf enabled!
g_ether: disagrees about version of symbol module_layout