[Kraftwerk]

Originally Posted by edwdecarlo

Important Note: @kiwidude has setup the Reading Lists to be device independent, so adding or removing devices will not affect the content of a Reading List.

Here are the steps to remove a device and re-add it to the Reading List Devices:

1. Do not have any Reading device connected to your laptop/PC/etc
2. Start calibre
3. Open Customize Reading List setup (use whatever method you currently use)
4. Select the Devices tab
5. Select the device to remove and click Delete (Recycle button at bottom of the list). Answer Yes to confirmation.
6. Click OK to exit Customize Reading List
7. Restart calibre
8. Connect reader/device. Wait for calibre to recognize the device (you'll a connected message at the bottom of calibre window, next to the version information)
9. Open Customize Reading List setup
10. Select the Devices tab
11. Click Add connected device (below devices list). This should automatically add your connected device to the devices list
12. Click OK to exit Customize Reading List
13. Restart calibre

You should now be able sync your books to your device via Reading List.

If you have any device specific Reading Lists which use the device you just re-added, you will need to reset the 'Device to sync this list to:' value for those Reading Lists.

Thanks, it worked!