You are aware that when you do the paperclip push of the reset button that you then have to push the power on switch after that in order for the T1 to reset, else nothing happens?
Connecting a T1 to a USB port does a power on, so that will have the same effect as pushing the power on switch after having pushed the reset button, and that may be what you are experiencing.
Only mention it just in case not realised, as it is different to many devices which normally reset with just the reset button push.
The icon appears and revolves when the T1 has dedicated itself to processing such as when doing a complete power down or power up; if the reader freezes during that time the revolving freezes.
Last edited by AnotherCat; 09-27-2013 at 05:02 PM.
|