[frostschutz]

Originally Posted by frostschutz

I guess it's worth a shot. I'll spend another €20 on a serial cable such as this http://www.delock.de/produkte/N_83117/dokumente.html and see if I can ruin my bricked Story HD some more with my horrible soldering skills. Sigh.

So I bought this, and a Piezo buzzer... and tried using this method here http://wiki.openwrt.org/doc/hardware....buzzer.method on the T1+T2 pads to find out which is which.

For T1, the pad on the right, and for T2, the upper pad, produce the screeching/modem sound. Unfortunately they do so all the time (whether it's booting or not). The other two are silent all the time (also during boot).

I tried to blindly connect just GND and RXD but failed to get output for any of the pads. I got a single "?" for the lower T2 pad, and nothing for the others. Not sure if it's even supposed to work at all with just GND/RXD/TXD but that wiki page suggests it.

I was expecting to find a single pad that produces some noise during boot, instead I found two that produce noise nonstop and two which are completely silent.

So I'm stumped again. I just don't know enough about electronics.