MobileRead Forums - View Single Post - Replace brocken PB626 Touch Lux 2 Display with new Touch Lux 3 display

nhedgehog · 05-10-2017, 01:12 AM

You can replace the PB TL2 display with a TL3 display. I have done it before, no problem with the hardware. The difference is sorted out by the firmware, which is searching at the start of the device for the displaytype and acts accordingly.

PS: If you want to be sure before you place the order, use the mainboard from the PBTL2 on the PBTL3 and see if this works. It is easy to switch.

05-10-2017, 01:12 AM	#3
nhedgehog Guru Posts: 750 Karma: 622656 Join Date: Sep 2013 Device: EnergySistemEreaderPro, Nook STG, Pocketbook 622, Bookeen Cybooks ...	You can replace the PB TL2 display with a TL3 display. I have done it before, no problem with the hardware. The difference is sorted out by the firmware, which is searching at the start of the device for the displaytype and acts accordingly. PS: If you want to be sure before you place the order, use the mainboard from the PBTL2 on the PBTL3 and see if this works. It is easy to switch. Last edited by nhedgehog; 05-10-2017 at 01:15 AM.