Quote:
Originally Posted by nikkie
toyz and I have fixed ours that had the same problem with the inverted logo via the serial method. It's described here. After you have the inverted logo, the buttons no longer work to reflash, so you have to instruct the device to reflash via the uboot menu from the serial console.
good luck! |
nikkie,
I have checked the other thread, but wasn't sure where to ask these questions, as the thread started discussions on other things.
I have a few basic questions. Before going to buy the things needed:
Can I use a gameport to USB (I have an old spare one) in place of the serial to usb?
and
I am very much confused about the wiring codes. The flickr pictues show red, blue, green wires joined to the header pins but your post mentions, Red Brown Yellow. I do have a multimeter (I am just amateur electronic hobbyist and biologist), but what and how to use it for this project.
Can you send the whole wiring diagram from PE end to the computer?
Thank you,