MobileRead Forums - View Single Post - Checking for required libs. Exporting Binaries "easily"

twobob · 03-11-2013, 09:44 PM

there are plenty of options...

probably the easiest/most flexible is:

add

Code:

if [ -e "/mnt/us/.bashrc" ]; then
    . /mnt/us/.bashrc
fi

to the END of your /etc/profile then you have a nice R/W area to play in with minimal rootfs changes.

simply stuff your additions in the FAT .bashrc (that you then create)

I do that generally.

I would add that this is not a completely bullet-proof solution to exporting. just a best-start tool to save some time.

There may be resources that are missed, even libs from time to time seem to be missed.
But in the main it does the job I need.

03-11-2013, 09:44 PM	#10
twobob ( ͡° ͜ʖ ͡°){ʇlnɐɟ ƃǝs}Týr Posts: 6,586 Karma: 6299991 Join Date: Jun 2012 Location: uti gratia usura (Yao ying da ying; Mo ying da yieng) Device: PW-WIFI\|K5-3G+WIFI\| K4\|K3-3G\|DXG\|K2\| Rooted Nook Touch	there are plenty of options... probably the easiest/most flexible is: add Code: if [ -e "/mnt/us/.bashrc" ]; then . /mnt/us/.bashrc fi to the END of your /etc/profile then you have a nice R/W area to play in with minimal rootfs changes. simply stuff your additions in the FAT .bashrc (that you then create) I do that generally. I would add that this is not a completely bullet-proof solution to exporting. just a best-start tool to save some time. There may be resources that are missed, even libs from time to time seem to be missed. But in the main it does the job I need. Last edited by twobob; 03-11-2013 at 09:50 PM.