Thread: iLiad iLiad kernel development
View Single Post
Old 11-20-2009, 07:28 PM   #56
alegeott
Member
alegeott knows what time it isalegeott knows what time it isalegeott knows what time it isalegeott knows what time it isalegeott knows what time it isalegeott knows what time it isalegeott knows what time it isalegeott knows what time it isalegeott knows what time it isalegeott knows what time it isalegeott knows what time it is
 
Posts: 15
Karma: 2010
Join Date: Mar 2008
Location: Near Pavia, Italy
Device: Pocketbook Pro 603 (Leggo IBS)
I post here two log extracts (the attached txt file is a complete backup log).
This is the boot report:
Code:
iRex Technologies Sexy Program Loader for ER0100 series e-reader
(c) 2005, 2006 by iRex Technologies BV
TFFS Volume info unit size: 524288kByte
Reading SysSet info...Done
	Hardware:       0007
	VCOM:           2CB0
	Source drivers: 0012
Initialising DELTA...Done
Uploading splash screen...Done
Initialising keys...Done
Loading kernel image...Done
Loading initrd...Done
Jumping to kernel...

Uncompressing Linux............................................ done, booting the kernel.
Linux version 2.4.19-rmk7-pxa2-irex1 (buildmgr@buildserver) () #21100 Tue Oct 2 17:40:05 CEST 2007
CPU: XScale-PXA255 revision 6
Machine: iRex Technologies ER0100 eReader
Ignoring unrecognised tag 0x00000000
Memory clock: 99.53MHz (*27)
Run Mode clock: 398.13MHz (*4)
Turbo Mode clock: 398.13MHz (*1.0, active)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/ram rw initrd=0xA1000000,4M rootfstype=ext2 init=/linuxrc rw console=ttyS2,115200 mem=64M
Console: colour dummy device 80x30
Calibrating delay loop... 397.31 BogoMIPS
Memory: 64MB = 64MB total
Memory: 59212KB available (1132K code, 275K data, 72K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Using PXA255 frequency points.
Registering CPU frequency change support.
CPU clock: 398.131 MHz (33.000-400.000 MHz)
Starting kswapd
I2C: PXA algorithm module loaded.
enable_irq(11) unbalanced from c0085a84
I2C: Adding PXA-I2C-Adapter.
I2C: Scanning bus (51)
I2C: Successfully added bus
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0x0000 (irq = 15) is a PXA UART
ttyS01 at 0x0000 (irq = 14) is a PXA UART
ttyS02 at 0x0000 (irq = 13) is a PXA UART
SA1100 Real Time Clock driver v1.00
PCF8563: RTC Initialization Successfull
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
ac97_codec: AC97 Audio codec, id: 0x5053:0x4304 (Philips UCB1400)
UCB1x00: probed IRQ55 correctly. Please remove machine dependencies from ucb1x00-core.c
Turning on amplifier
enable_irq(55) unbalanced from c00a5888
Linux Kernel Card Services 3.1.22
  options:  [pm]
Intel PXA250/210 PCMCIA (CS release 3.1.22)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
irex_er0100_pcmcia_configure_socket: Resetting WLAN
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 4096K
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 72K
----------------------------------------
Starting initrd
----------------------------------------
Starting tffs filesystem
Using /lib/modules/tffs.o
tffs: TrueFFS driver 7100.76
tffs: will not use IRQ<7>tffs: TffsMapMem: request_mem_region(0,20000) OK
tffs: DOCH found<6>tffs: Socket 0 in addr 0x0
tffs: Device 0x0: size 0xe500000 HW sector 0x200 (recommended 0x1000)
tffs: use major device number 100
Partition check:
 tffsa: tffsa1 tffsa3 < tffsa5 tffsa6 tffsa7 >
tffs:     disk partition: dev_number=0x6401, 149084 sectors, start_sector=52
tffs:     disk partition: dev_number=0x6403, 2 sectors, start_sector=149136
tffs:     disk partition: dev_number=0x6405, 55484 sectors, start_sector=149188
tffs:     disk partition: dev_number=0x6406, 262652 sectors, start_sector=204724
tffs:     disk partition: dev_number=0x6407, 1196 sectors, start_sector=467428

Loading sysset and keystore modules
Using /lib/modules/sysset.o
iRex sysset module loaded.
Using /lib/modules/keystore.o
iRex keystore module loaded.

Starting delta ASIC with hwrev=7
Using /lib/modules/delta.o
einkfb: Hardware version 7
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth 8) not supported
Console: switching to colour frame buffer device 96x64

Starting button device
Using /lib/modules/button.o
iRex ER0100 eReader Button Driver initialised
Kernel: Init WACOM On

Starting battery device
Using /lib/modules/battery.o
iRex ER0100 eReader Battery Gas Gauge Driver initialised

Check for downloaded firmware updates [os=0,fs=0]
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
  os flag not set, no os.gz; nothing to do
  fs flag not set, no fs.gz; nothing to do
No updates, booting app fs...
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
umount: Cannot open /proc/mounts
INIT: version 2.86 booting
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
MSDOS FS: IO charset utf8
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... done.
INIT: Entering runlevel: 5
Starting PCMCIA services: cardmgr[251]: watching 2 sockets
done.
cardmgr[252]: socket 1: Marvell
Starting MMC services
Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/ide/ide-mod.o
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/ide/ide-disk.o
Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/ide/ide-probe-mod.o
cardmgr[252]: executing: 'modprobe cf8385 2>&1'
cardmgr[252]: + Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/pcmcia/cfio.o
(W)displayMgr.c:250,main() ePaper daemon (displayMgr 0.212)
(W)displayMgr.c:255,main() Display Manager is accessible to local processes only.
(W)erdmServer.c:62,initServer() Bound successfully to 127.0.0.1:50555.
Before calling register_pccard_driver
After calling register_pccard_driver
cardmgr[252]: + Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/pcmcia/cf8385.o
Entering cf_attach()
Before registering the client
irex_er0100_pcmcia_configure_socket: Resetting WLAN
BasePort1=0xf7000000, AssignedIRQ=68
(W)eripc.c:38,erIpcInitServer() Version: 256

(W)eripc.c:83,erIpcInitServer() Kernel: WACOM Off Delay start
Bound successfully to 127.0.0.1:50071.
After calling wlan_add_card function
Leaving cf_attach()
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth 8) not supported
Waiting for mb-applet-icon-container ...
.cardmgr[252]: executing: './network start wlan0 2>&1'
cardmgr[252]: + Default Config
.cardmgr[252]: + wlan0     deepsleep:setting to on 
cardmgr[252]: + Sample private network setup
Could not init font path element /usr/lib/X11/fonts/misc, removing from list!
Could not init font path element /usr/lib/X11/fonts/100dpi, removing from list!
Could not init font path element /usr/lib/X11/fonts/75dpi, removing from list!
..(W)eripc.c:38,erIpcInitServer() Version: 256

(W)eripc.c:83,erIpcInitServer() Bound successfully to 127.0.0.1:50073.
..... wait done
Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/usb/hal.o
hal_pxa250.c: 1362-hal Initialization Success 
Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/usb/phci.o
td_cache = c022f9f0
ed_cache = c022fa60
usb.c: new USB bus registered, assigned bus number 1
(W)eripc.c:38,erIpcInitServer() Version: 256

(W)eripc.c:83,erIpcInitServer() Bound successfully to 127.0.0.1:50072.
hub.c: USB hub found
hub.c: 2 ports detected
USB HAL: HC suspend
usb_phci.c: usb-phci Initialization Success 
Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/scsi/scsi_mod.o
SCSI subsystem driver Revision: 1.00
Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/usb/storage/usb-storage.o
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
(CL_W)main.c:315,main() gtk_rc_get_default_files [/etc/gtk-2.0/gtkrc]
(CL_W)main.c:315,main() gtk_rc_get_default_files [/home/root/.gtkrc-2.0]
$** can't synthesize pci hotplug events
AC97: Turning off sound
$** can't synthesize root hub events
Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/usb/pdc.o
USB HAL: DC suspend
usb_pdc.c: usb-pdc Initialization Success 
Using /lib/modules/2.4.19-rmk7-pxa2-irex1/kernel/drivers/usb/mscd.o
pdc_bus.c: Registered Driver devmscd
devmscd.c: devmscd Initialization Success 
(CL_E)erConnect.c:69,erConnectInit() Lock the connect mutex
(W)mb-applet-icon-container.c:1185,loadIcons() Can't find pRegIcon[56]
(W)mb-applet-icon-container.c:1185,loadIcons() Can't find pRegIcon[57]
(W)eripc.c:38,erIpcInitServer() Version: 256

(W)eripc.c:83,erIpcInitServer() Bound successfully to 127.0.0.1:50065.
(CL_E)metadataStoreManager.c:936,recreateArchives() Can not create directory /mnt/free/newspapers!
(CL_E)metadataStoreManager.c:947,recreateArchives() Can not create directory /mnt/free/books!
(CL_E)metadataStoreManager.c:958,recreateArchives() Can not create directory /mnt/free/documents!
(CL_E)metadataStoreManager.c:969,recreateArchives() Can not create directory /mnt/free/notes!
(CL_E)metadataStoreManager.c:921,recreateArchives() storage not mounted, storage type[5]
(W)eripc.c:38,erIpcInitServer() Version: 256

(W)eripc.c:83,erIpcInitServer() Bound successfully to 127.0.0.1:50070.
(CL_W)programManager.c:1076,pm_InitProgramTable() Application [APABIMOBI] executable [/usr/bin/xebreader] is not found: disabled it
(CL_W)programManager.c:1076,pm_InitProgramTable() Application [EBA] executable [/usr/bin/eba] is not found: disabled it
(CL_W)programManager.c:1076,pm_InitProgramTable() Application [ARINC] executable [/usr/bin/ereader_mapviewer] is not found: disabled it
(CL_W)programManager.c:1166,pm_AddExtensionsToTable() Program SHELL associated with [sh] without extensionInfo entry in registry. Consider fixing this!

OpenEmbedded Linux ereader ttyS2

ereader login: root
login[561]: root login  on `ttyS2'
This is the log message after 'halt' command.
Code:
root@ereader:~# halt

Broadcast message from root (ttyS2) (Thu Nov 19 16:58:25 2009):

The system is going down for system halt NOW!
INIT: Switching to runlevel: 0
INIT: Sending processes the TERM signal
root@ereader:~# INIT: Sending processes the KILL signal
Shutting down PCMCIA services: cardmgr[252]: executing: './network stop wlan0 2>&1'
cardmgr[252]: + /sbin/ifconfig wlan0 down
Before calling wlan_remove function
After calling wlan_remove function
cardmgr[252]: exiting
done.
Deconfiguring network interfaces... done.
usb.c: deregistering driver usb-storage
Sending all processes the TERM signal...
Can't deallocate console 2 errno 16
Sending all processes the KILL signal...
flushing ide devices: 
Power down.
Shutting off Power Supply
Walk on, soon I post the motherboard photos with TP connection...
Attached Files
File Type: txt iliad-091119,bak.txt (145.6 KB, 213 views)

Last edited by alegeott; 11-20-2009 at 07:46 PM.
alegeott is offline   Reply With Quote