View Single Post
Old 03-13-2013, 09:35 AM   #15
Mark Nord
2B || !2B
Mark Nord can program the VCR without an owner's manual.Mark Nord can program the VCR without an owner's manual.Mark Nord can program the VCR without an owner's manual.Mark Nord can program the VCR without an owner's manual.Mark Nord can program the VCR without an owner's manual.Mark Nord can program the VCR without an owner's manual.Mark Nord can program the VCR without an owner's manual.Mark Nord can program the VCR without an owner's manual.Mark Nord can program the VCR without an owner's manual.Mark Nord can program the VCR without an owner's manual.Mark Nord can program the VCR without an owner's manual.
 
Posts: 819
Karma: 178742
Join Date: Feb 2010
Location: Austria
Device: Sony PRS505/650/T1
Quote:
ow do I access the file that gives the MD5 error? Is it in the /tmp/ directory?
You will have to edit flash_opt.300.sh in /Sony Reader/

Code throwing the error is here (assuming : unistaller package)
Spoiler:
Code:
if [ -f $TMP_IMG -a -f $TMP_MD5 ]
then
   # cp -f $SD_IMG $TMP_IMG
   REAL_MD5=`/usr/bin/md5sum $TMP_IMG | cut -f1 -d\  `
   TEST_MD5=`cut -f1 -d\  $TMP_MD5 `

   if [ $REAL_MD5 = $TEST_MD5 ]
   then
      echo "Mounting SD card image" >> $W_LOG
      mount -o loop -t cramfs $TMP_IMG /tmp/img_mnt >> $W_LOG 2>&1
      # mount --bind /tmp/img_mnt/bin /bin >> $W_LOG 2>&1
      # mount --bind /tmp/img_mnt/lib /lib >> $W_LOG 2>&1
      # mount --bind /tmp/img_mnt/usr /usr >> $W_LOG 2>&1
      mount --bind /tmp/img_mnt /opt >> $W_LOG 2>&1
      echo "Done mounting SD card image" >> $W_LOG
      UMT=1
   else
      echo "MD5 check failure [$REAL_MD5 != $TEST_MD5]" >> $W_LOG
      echo -n "9 $TMP_IMG MD5 failure." > $RESFILE
      exit 1
   fi
else
   echo "Image or md5 not found" >> $W_LOG
   echo -n "10 Image or MD5 not found on card." > $RESFILE
   exit 1
fi


While copying the files is done in /Sony Reader/software/autorun.js
Spoiler:
Code:
target.doDigit6 = function()
{
    //this.trace("[autorun] begin five\n");
    try {
		// this.screenshot ();
        err = this.prepareMcopy();
        if (err)
            return this.showMsg(err+"\n"+this.prompt);

        this.showMsg("Copying image files into memory...");

		// this.screenshot ();

        this.runCommand("mkdir -p /tmp/self_upgrade");
        if (!this.copyFile(this.driveroot+"/new_opt.300.img","/tmp/self_upgrade/new_opt.300.img"))
            return this.showMsg("error copying new_opt.300.img to /tmp/\n"+this.prompt);
        if (!this.copyFile(this.driveroot+"/new_opt.300.md5","/tmp/self_upgrade/new_opt.300.md5"))
            return this.showMsg("error copying new_opt.300.md5 to /tmp/\n"+this.prompt);

        if (!this.copyFile(this.driveroot+"/flash_opt.300.sh","/tmp/script.sh"))
            return this.showMsg("error copying flash_opt.300.sh to /tmp/\n"+this.prompt);
        this.showMsg("Flashing new Fsk filesystem.\nThis might take a few minutes.");
		// this.screenshot ();

        this.runScript();
        var res = this.fileToString("/tmp/result.log");
        if (!res)
        {


But while checking the code of the various scripts I came to the conclusion that the hack300Update most probably not only rewrites the FSK-partition but also the Rootfs. (cramfs.Rootfs.img)

So proper restoration will need to replace both partitions.

Which the PRS+ installer is trying to do:
Spoiler:
Code:
target.actions.backup = {
	confirmMessage : "CONFIRM_BACKUP_ALL",
	perform : function() {
		initTools();
		var fskPath = getUnusedFilename("/Data/" + versions.ebook.firmware + ".fsk");
		var rootPath = getUnusedFilename("/Data/" + versions.ebook.firmware + ".root");
		var root2Path = getUnusedFilename("/Data/" + versions.ebook.firmware + ".root2");
		var bootPath = getUnusedFilename("/Data/" + versions.ebook.firmware + ".boot");

		print(L("SAVING") + " BootImg...");
		exec("cat /dev/mtdblock9 > " + bootPath);

		print("OK Rootfs2...");
		exec("cat /dev/mtdblock13 > " + root2Path);

		print("OK Rootfs...");
		exec("cat /dev/mtdblock14 > " + rootPath);

		print("OK Fsk...");
		exec("cat /dev/mtdblock15 > " + fskPath);

		println("OK \n " + L("ALL_PARTITIONS_SAVED"));
	}
};

target.actions.flashRoot = {
	confirmMessage : "CONFIRM_FLASH_ROOT",
	perform : function() {
		initTools();
		print(L("COPYING_IMAGE"));
		var path = FIRMWARE_PATH + versions.ebook.model + "/" + versions.installer.firmware + ".root";
		var md5path = path + ".md5";
		copyFile(path, "/tmp/Rootfs.img");
		print("OK");
		flashImage(getFileContent(md5path, "--error--"), "Rootfs");
	}
};

but obviously lacks the the image "Rootfs.img"

So after hack300Update Rootfs and FSK will be the ons for a 505.
After Un-Installer Rootfs is still 505 and FSK for the 300 which will prevent the device from proper starting.

@Kartu: makes this any sense?
And if so, can you please provide a Rootfs.img?
Mark Nord is offline   Reply With Quote