View Single Post
Old 02-19-2013, 01:15 AM   #3
raccoon
Junior Member
raccoon has exceeded all limitations known to mankindraccoon has exceeded all limitations known to mankindraccoon has exceeded all limitations known to mankindraccoon has exceeded all limitations known to mankindraccoon has exceeded all limitations known to mankindraccoon has exceeded all limitations known to mankindraccoon has exceeded all limitations known to mankindraccoon has exceeded all limitations known to mankindraccoon has exceeded all limitations known to mankindraccoon has exceeded all limitations known to mankindraccoon has exceeded all limitations known to mankind
 
Posts: 1
Karma: 17106
Join Date: Feb 2013
Device: Kindle 2
Works with Kindle 2

Tested and confirmed to work with Kindle 2.
Firmware: Kindle 2.5.8 (555370010)

Create an empty file named ENABLE_DIAGS in the root folder of the mounted Kindle volume. Unplug the Kindle and give it a full power cycle (reboot).

It should not have a ".txt" extension, so if you are using Windows make sure that you uncheck Hide Known Extensions in your folder options settings.

P.S. MoviNand tests are non-destructive. They just verify the filesystem.

Code:
MoviNand RootFS Verification
----------------------------

FAILURE

The rootfs failed md5sum verification
beause the following file had a bad md5sum:

/usr/lib/tts/speech/components/voicefont/vf_tom_fu ...

FS Version : 010-TNM0.9-055537
Build Date : Thu Jan 13 18:17:49 PST 2011

Press X to continue ...
Note, this device was never hacked, only firmware updated once. This gives me the impression that one shouldn't worry about a receiving a similar test failure.

Last edited by raccoon; 02-19-2013 at 01:21 AM.
raccoon is offline   Reply With Quote