View Single Post
Old 11-18-2012, 10:44 AM   #10
eureka
but forgot what it's like
eureka ought to be getting tired of karma fortunes by now.eureka ought to be getting tired of karma fortunes by now.eureka ought to be getting tired of karma fortunes by now.eureka ought to be getting tired of karma fortunes by now.eureka ought to be getting tired of karma fortunes by now.eureka ought to be getting tired of karma fortunes by now.eureka ought to be getting tired of karma fortunes by now.eureka ought to be getting tired of karma fortunes by now.eureka ought to be getting tired of karma fortunes by now.eureka ought to be getting tired of karma fortunes by now.eureka ought to be getting tired of karma fortunes by now.
 
Posts: 728
Karma: 2314258
Join Date: Dec 2011
Location: north (by northwest)
Device: Kindle Touch
Quote:
Originally Posted by h1uke View Post
u-boot/ imx50_yoshi.c says (CONFIG_BIST, CONFIG_CMD_PMIC and CONFIG_CMD_IDME are defined):

Code:
inline int check_boot_mode(void) 
{
	char boot_mode[20];
	char boot_cmd[20];

#ifdef CONFIG_BIST
	setenv("bootdelay", "-1");
#endif

#if defined(CONFIG_CMD_IDME)
	if (idme_get_var("bootmode", boot_mode, 20)) 
#endif
	{
	    return -1;
	}

	boot_cmd[0] = 0;

	if (!strncmp(boot_mode, "diags", 5)) {
	    printf ("BOOTMODE OVERRIDE: DIAGS\n");
	    strcpy(boot_cmd, "run bootcmd_diags");
	} else if (!strncmp(boot_mode, "fastboot", 8)) {
	    printf ("BOOTMODE OVERRIDE: FASTBOOT\n");
	    strcpy(boot_cmd, "run bootcmd_fastboot");
	} else if (!strncmp(boot_mode, "factory", 7)) {
#if defined(CONFIG_PMIC)
	    if (pmic_charging()) {
		char *cmd = (char *) CONFIG_BISTCMD_LOCATION;		
		/* Ignore any bist commands */
		cmd[0] = 0;

		printf ("BOOTMODE OVERRIDE OVERRIDE: DIAGS\n");

#if defined(CONFIG_CMD_IDME)
		/* Update bootmode idme var */
		idme_update_var("bootmode", "diags");
#endif
		/* Set the bootcmd to diags and boot immediately */
		setenv("bootcmd", "run bootcmd_diags");
		setenv("bootdelay", "0");
		
		return 0;

	    }
#endif	//CONFIG_PMIC
	    printf ("BOOTMODE OVERRIDE: FACTORY\n");
	    strcpy(boot_cmd, "run bootcmd_factory");
	} else if (!strncmp(boot_mode, "reset", 7)) {
	    printf ("BOOTMODE OVERRIDE: RESET\n");
	    strcpy(boot_cmd, "bist reset");
	} else if (!strncmp(boot_mode, "main", 4)) {
	    /* clear bootargs */
	    setenv("bootargs", "\0");

	    /* set bootcmd back to default */
	    sprintf(boot_cmd, "bootm 0x%x", CONFIG_MMC_BOOTFLASH_ADDR);
	    return 0;
	} else {
	    return 0;
	}
	
	setenv("bootcmd", boot_cmd);

	return 0;
}
i.e. the diag mode is forced if pmic_charging() returns nonzero
It should work only if boot_mode is set to "factory", right? By default, boot_mode is set to "main". It's initialized from some configuration variable (idme variable), persistently stored at eMMC. You can change bootmode from U-Boot console (by idme command) or from root shell on device (by /usr/sbin/idme tool).
eureka is offline   Reply With Quote